Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Oct 1998 23:32:55 +0100
From:      Wolfram Schneider <wosch@panke.de.freebsd.org>
To:        current@FreeBSD.ORG
Subject:   calcru: negative time of -695317300 usec for pid
Message-ID:  <19981027233255.A1336@panke.de.freebsd.org>

next in thread | raw e-mail | index | archive | help
I get randomly negative time errors during make world tests:
calcru: negative time of -695317300 usec for pid 6931 (cc1)


$ uptime 
11:32PM  up 1 day,  1:28, 4 users, load averages: 1.29, 1.04, 0.81

$ dmesg
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-BETA #8: Fri Oct 23 09:57:01 GMT 1998
    root@paula.panke.de.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz  cost 1476 ns
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x580  Stepping=0
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 134217728 (131072K bytes)
avail memory = 127787008 (124792K bytes)
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=10b9 device=1541)> rev 0x04 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=10b9 device=5243)> rev 0x04 on pci0.1.0
chip2: <PCI to ISA bridge (vendor=10b9 device=1533)> rev 0xc3 on pci0.7.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0xc1 int a irq 0 on pci0.15.0
ide_pci: controller is simplex, no DMA on secondary channel
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x10 int a irq 11 on pci1.0.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTTA-350840>
wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s1a
rtinit: wrong ifa (0xf0a16d00) was (0xf0a16f80)
calcru: negative time of -695317300 usec for pid 6931 (cc1)
swap_pager: suggest more swap space: 253 MB
calcru: negative time of -695437148 usec for pid 9990 (test)
calcru: negative time of -592101957 usec for pid 20635 (cvsup)

-- 
Wolfram Schneider <wosch@freebsd.org> http://www.freebsd.org/~w/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19981027233255.A1336>