Date: Wed, 14 Jan 2009 00:24:19 +0100 From: "Vincent Barus" <vibarus@googlemail.com> To: "Sam Leffler" <sam@errno.com> Cc: stable@freebsd.org Subject: Re: CFT: ath hal src switchover Message-ID: <e4207650901131524p55a6d2at29466ea9552fb93b@mail.gmail.com> In-Reply-To: <alpine.BSF.2.00.0901082219000.1315@baba.farley.org> References: <49665E35.1050301@errno.com> <alpine.BSF.2.00.0901082219000.1315@baba.farley.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jan 9, 2009 at 5:32 AM, Sean C. Farley <scf@freebsd.org> wrote: > On Thu, 8 Jan 2009, Sam Leffler wrote: > >> I've brought the hal source code back to RELENG_7 but not connected it to >> the build and/or driver. I want folks to test this before I commit those >> changes. To do this you must have an up to date RELENG_7 code base and then >> apply this patch: >> >> http://people.freebsd.org/~sam/ath_hal-releng7.patch > > *snip* > >> Please report any issues to this mailing list. > > No problems for my Netgear WPN511. It works well at home. > > Now, if I just could figure out why the recent Aruba update at work is > preventing me from authenticating with it, I would be happy. This is not > related to the MFC of the code. iPhones and MacOSX 10.4 (but not 10.5) are > also having problems. Windows works. > > Sean > -- > scf@FreeBSD.org > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > Hi, today I tried to get a (samsung nc10 ath) nic working. The patch failed to edit this three files: sys/modules/ath_rate_onoe/Makefile sys/modules/ath_rate_sample/Makefile sys/modules/ath_rate_amrr/Makefile I emptied them manually and ran a buildworld/kernel/etc on a clean 7.1 stable but i get a error message while booting: ath0: unable to attach hardware; HAL status 13 After that I csuped the latest stable srcs, applied hal-20081015-sanitized.tgz and run the complete buildprocess again. The same error Message occurs. Is there any trick to get the samsungs ath card running? regards, Vincent Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-STABLE #0: Tue Jan 13 21:21:53 CET 2009 root@:/usr/obj/usr/src/sys/BOOKLI Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a99000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a99250. Calibrating clock(s) ... i8254 clock: 1193244 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1595994372 Hz CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1595.99-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>> AMD Features2=0x1<LAHF> Logical CPUs per core: 2 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 512 kbytes, 16-way associative, 64 bytes/line real memory = 1064108032 (1014 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000003e4b0fff, 1032372224 bytes (252044 pages) avail memory = 1031852032 (984 MB) Table 'FACP' at 0x3f6e1bd2 Table 'APIC' at 0x3f6e1cc6 MADT: Found table at 0x3f6e1cc6 MP Configuration Table version 1.4 found at 0xc009fc71 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: <INTEL CALISTGA> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f7150 bios32: Entry = 0xfd5f0 (c00fd5f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd5f0+0x275 pnpbios: Found PnP BIOS data at 0xc00f71f0 pnpbios: Entry = f0000:b8d8 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu 1 ULE: adding cpu 1 to group 0: cpus 2 mask 0x3 ACPI: RSDP @ 0x0xf71a0/0x0024 (v 2 PTLTD ) ACPI: XSDT @ 0x0x3f6db94a/0x0084 (v 1 SECCSD LH43STAR 0x06040000 LTP 0x00000000) ACPI: FACP @ 0x0x3f6e1bd2/0x00F4 (v 3 INTEL CALISTGA 0x06040000 ALAN 0x00000001) ACPI: DSDT @ 0x0x3f6dd5f2/0x456C (v 1 INTEL CALISTGA 0x06040000 INTL 0x20050624) ACPI: FACS @ 0x0x3f6e2fc0/0x0040 ACPI: APIC @ 0x0x3f6e1cc6/0x0068 (v 1 INTEL CALISTGA 0x06040000 LOHR 0x0000005A) ACPI: HPET @ 0x0x3f6e1d2e/0x0038 (v 1 INTEL CALISTGA 0x06040000 LOHR 0x0000005A) ACPI: MCFG @ 0x0x3f6e1d66/0x003C (v 1 INTEL CALISTGA 0x06040000 LOHR 0x0000005A) ACPI: TCPA @ 0x0x3f6e1da2/0x0032 (v 1 PTLTD CALISTGA 0x06040000 PTL 0x00000001) ACPI: TMOR @ 0x0x3f6e1dd4/0x0026 (v 1 PTLTD 0x06040000 PTL 0x00000003) ACPI: APIC @ 0x0x3f6e1dfa/0x0068 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000) ACPI: BOOT @ 0x0x3f6e1e62/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) ACPI: SLIC @ 0x0x3f6e1e8a/0x0176 (v 1 SECCSD LH43STAR 0x06040000 LTP 0x00000000) ACPI: SSDT @ 0x0x3f6dcfa3/0x064F (v 1 SataRe SataPri 0x00001000 INTL 0x20050624) ACPI: SSDT @ 0x0x3f6dc907/0x069C (v 1 SataRe SataSec 0x00001000 INTL 0x20050624) ACPI: SSDT @ 0x0x3f6db9ce/0x04F6 (v 2 PmRef CpuPm 0x00003000 INTL 0x20050624) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled nfslock: pseudo-device ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) npx0: INT 16 interface acpi0: <SECCSD LH43STAR> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd7a69000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27ac8086) pcibios: BIOS version 2.10 AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 ACPI timer: 1/2 1/1 1/1 1/2 1/1 1/2 1/1 1/1 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x27ac, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27ae, revid=0x03 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xf0000000, size 19, enabled map[14]: type I/O Port, range 32, base 0x1800, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled map[1c]: type Memory, range 32, base 0xf0300000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27a6, revid=0x03 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf0080000, size 19, enabled found-> vendor=0x8086, dev=0x27d8, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf0340000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x27d0, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27d4, revid=0x02 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27c8, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x27c9, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27ca, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27cb, revid=0x02 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27cc, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf0544000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0xe2 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c4, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x1810, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf007ffff,0xd0000000-0xdfffffff,0xf0300000-0xf033ffff irq 16 at device 2.0 on pci0 agp0: <Intel 945GME SVGA controller> on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf0000000 vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xf0300000 agp0: detected 7932k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xf0080000-0xf00fffff at device 2.1 on pci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf0100000-0xf01fffff pcib1: no prefetched decode pci2: <ACPI PCI bus> on pcib1 pci2: domain=0, physical bus=2 found-> vendor=0x168c, dev=0x001c, revid=0x01 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xf0100000, size 16, enabled pcib1: requested memory range 0xf0100000-0xf010ffff: good pcib1: matched entry for 2.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 ath0: <Atheros 5424/2424> mem 0xf0100000-0xf010ffff irq 16 at device 0.0 on pci2 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf0100000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 ath0: [MPSAFE] ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 13 device_attach: ath0 attach returned 6 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x2000-0x2fff pcib2: memory decode 0xf0200000-0xf02fffff pcib2: no prefetched decode pci3: <ACPI PCI bus> on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x11ab, dev=0x4354, revid=0x13 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf0200000, size 14, enabled pcib2: requested memory range 0xf0200000-0xf0203fff: good map[18]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib2: requested I/O range 0x2000-0x20ff: in range pcib2: matched entry for 3.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 pci3: <network, ethernet> at device 0.0 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0544000-0xf05443ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0544000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered umass0: <Samsung Mighty Drive, class 0/0, rev 2.00/1.10, addr 2> on uhub4 umass0:0:0:-1: Attached to scbus0 ugen0: <Vimicro Corp. Namuga 1.3M Webcam, class 239/2, rev 2.00/1.00, addr 3> on uhub4 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib3: domain 0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0xf000-0xfff pcib3: no prefetched decode pcib3: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib3 pci4: domain=0, physical bus=4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: <ACPI Control Method Battery> on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT @ 0x0x3f6dc5ee/0x0245 (v 2 PmRef Cpu0Ist 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3f6dbec4/0x06A5 (v 2 PmRef Cpu0Cst 0x00003001 INTL 0x20050624) est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT @ 0x0x3f6dc833/0x00D4 (v 2 PmRef Cpu1Ist 0x00003000 INTL 0x20050624) ACPI: SSDT @ 0x0x3f6dc569/0x0085 (v 2 PmRef Cpu1Cst 0x00003000 INTL 0x20050624) est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdf000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xe21 0xe21 0xe21 0xe21 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xe21 0xe21 0xe21 0xe21 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xe21 0xe21 0xe21 0xe21 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66499787 hz Timecounter "TSC" frequency 1595994372 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached acpi_acad0: acline initialization start battery0: acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire battery0: battery initialization done, tried 1 times ad0: 152627MB <WDC WD1600BEVT-35ZCT1 11.01A11> at ata0-master SATA150 ad0: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 GEOM_LABEL: Label for provider ad0s1 is ntfs/RECOVERY. GEOM: new disk da0 pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <Samsung Mighty Drive PMAP> Removable Direct Access SCSI-0 device pass0: 40.000MB/s transfers da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Samsung Mighty Drive PMAP> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 1967MB (4029440 512 byte sectors: 255H 63S/T 250C) SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 0 Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init Linux ELF exec handler installed hostb0@pci0:0:0:0: class=0x060000 card=0xca00144d chip=0x27ac8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI cap 09[e0] = vendor (length 9) Intel cap 7 version 1 vgapci0@pci0:0:2:0: class=0x030000 card=0xca00144d chip=0x27ae8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display subclass = VGA cap 05[90] = MSI supports 1 message cap 01[d0] = powerspec 2 supports D0 D3 current D0 vgapci1@pci0:0:2:1: class=0x038000 card=0xca00144d chip=0x27a68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile 945GM/GU Express Integrated Graphics Controller' class = display cap 01[d0] = powerspec 2 supports D0 D3 current D0 none0@pci0:0:27:0: class=0x040300 card=0xca00144d chip=0x27d88086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) High Definition Audio' class = multimedia subclass = HDA cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 05[60] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 1 type 0 pcib1@pci0:0:28:0: class=0x060400 card=0xca00144d chip=0x27d08086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCIe Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 1 root port cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0xca00144d cap 01[a0] = powerspec 2 supports D0 D3 current D0 pcib2@pci0:0:28:2: class=0x060400 card=0xca00144d chip=0x27d48086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCIe Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 1 root port cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0xca00144d cap 01[a0] = powerspec 2 supports D0 D3 current D0 uhci0@pci0:0:29:0: class=0x0c0300 card=0xca00144d chip=0x27c88086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0xca00144d chip=0x27c98086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0xca00144d chip=0x27ca8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci3@pci0:0:29:3: class=0x0c0300 card=0xca00144d chip=0x27cb8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0xca00144d chip=0x27cc8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 pcib3@pci0:0:30:0: class=0x060401 card=0xca00144d chip=0x24488086 rev=0xe2 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI cap 0d[50] = PCI Bridge card=0xca00144d isab0@pci0:0:31:0: class=0x060100 card=0xca00144d chip=0x27b98086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM (ICH7-M) LPC Interface Controller' class = bridge subclass = PCI-ISA cap 09[e0] = vendor (length 12) Intel cap 1 version 0 features: Quick Resume, SATA RAID-5, Mobile, 6 PCI-e x1 slots, SATA RAID-0/1/10 atapci0@pci0:0:31:2: class=0x010180 card=0xca00144d chip=0x27c48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller' class = mass storage subclass = ATA cap 01[70] = powerspec 2 supports D0 D3 current D0 none1@pci0:0:31:3: class=0x0c0500 card=0xca00144d chip=0x27da8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus Controller' class = serial bus subclass = SMBus ath0@pci0:2:0:0: class=0x020000 card=0x7131144f chip=0x001c168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5006 family 802.11abg Wireless NIC' class = network subclass = ethernet cap 01[40] = powerspec 2 supports D0 D3 current D0 cap 05[50] = MSI supports 1 message cap 10[60] = PCI-Express 1 legacy endpoint cap 11[90] = MSI-X supports 1 message in map 0x10 none2@pci0:3:0:0: class=0x020000 card=0xca00144d chip=0x435411ab rev=0x13 hdr=0x00 vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' class = network subclass = ethernet cap 01[48] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[5c] = MSI supports 1 message, 64 bit cap 10[c0] = PCI-Express 2 legacy endpoint -- ~ vb
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e4207650901131524p55a6d2at29466ea9552fb93b>