Date: Thu, 02 Jan 1997 14:48:45 -1000 From: Hugh Blandford <hugh@s055.aone.net.au> To: freebsd-questions@FreeBSD.org Subject: SMC 9332 @ 10Mbits/sec Message-ID: <32CC576D.44C2@s055.aone.net.au>
next in thread | raw e-mail | index | archive | help
I have a SMC 10/100Mbit/sec card attached to a 10Mbit/sec hub from 3COM. As soon as the the driver initialises the green light on the port goes off. I have changed my sysconfig file so that de0 has the -link2 switch set. Running ifconfig de0 -link2 says that the de0 is now set to 10baseT. However, this does not reinitialise the port on the hub. With the change to the sysconfig file, the de0 driver is found during the PCI bus scan and set to 100Mbit/sec. Again the port light goes off and even when the port is set to 10Mbit/sec the 3COM hub is not initialised again. What can I do? I am going spare so please help. Regards, Hugh.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?32CC576D.44C2>