Date: Thu, 18 Nov 1999 18:20:02 -0800 (PST) From: Patrick Kessen <p.kessen@lixus.com> To: freebsd-bugs@FreeBSD.org Subject: RE: kern/14960: Compaq EISA array controller not working Message-ID: <199911190220.SAA48043@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/14960; it has been noted by GNATS.
From: Patrick Kessen <p.kessen@lixus.com>
To: freebsd-gnats-submit@freebsd.org
Cc: p.kessen@lixus.com
Subject: RE: kern/14960: Compaq EISA array controller not working
Date: Fri, 19 Nov 1999 03:21:15 +0100
The status now is that the controller is detected:
in ida.c I changed
________________this:_____________________
if (dev->id_iobase) {
/* check out the configured iobase if given one */
slot = dev->id_iobase / 0x1000;
if (slot == 0 || slot > MAX_EISA_SLOT) {
______________into this:____________________________________________
if (dev->id_iobase) {
/* check out the configured iobase if given one */
slot = 6;
/* dev->id_iobase / 0x1000; */
if (slot == 0 || slot > MAX_EISA_SLOT) {
_____________meaning:______________________________________________
My eisa smart array adapter is in eisa slot 6, look no further.
as far as I see the code then has no problem determining the portaddress
and irq.
_________this is the boot output:___________________________________
/kernel: eisa0: <CPQ811 (System Board)>
/kernel: Probing for devices on the EISA bus
/kernel: ep0: <3Com 3C579-TP EISA Network Adapter> at 0x1000-0x100f,
0x1c80-0x1c89 irq 5
/kernel: ep0: on eisa0 slot 1
/kernel: ep0: aui/utp[*UTP*] address 00:20:af:1d:1b:e3
/kernel: eisa0:6 <CPQ4020=0xe114020> unknown device
/kernel: Probing for devices on PCI bus 0:
/kernel: ncr0: <ncr 53c825 fast10 wide scsi> rev 0x02 int a irq 10 on
pci0.10.0
/kernel: vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 14
on pci0.12.0
/kernel: chip0: <Intel 82375EB PCI-EISA bridge> rev 0x04 on pci0.15.0
/kernel: Probing for devices on the ISA bus:
/kernel: sc0 on isa
/kernel: sc0: VGA color <16 virtual consoles, flags=0x0>
/kernel: atkbdc0 at 0x60-0x6f on motherboard
/kernel: atkbd0 irq 1 on isa
/kernel: psm0 irq 12 on isa
/kernel: psm0: model Generic PS/2 mouse, device ID 0
/kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
/kernel: sio0: type 16550A
/kernel: sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa
/kernel: sio1: type 16550A
/kernel: ppc0 at 0x3bc irq 7 on isa
/kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
/kernel: lpt0: <generic printer> on ppbus 0
/kernel: lpt0: Interrupt-driven port
/kernel: ida0: drvs=1 firm_rev=2.26
/kernel: ida0 at 0x6000-0x6fff irq 15 on eisa slot 6
/kernel: ida0: unit 0 (id0): <Compaq Logical Drive>
/kernel: id0: 10028MB (20538720 total sec), 2517 cyl, 255 head, 32 sec,
bytes/sec 512
/kernel: ida: wdc vector stealing off (mode = never, boot major = 4)
/kernel: ida0: irq with no handler
____ ida0: irq with no handler__________________
this one is a mystery to me, in the visual kernel config under the
miscelanious section there are 2 ida0 entries so the 2nd one must be the
one this warning is about.
______more info_______________________________
I essentially defined the following as well
options IDA_CUCKOO_MODE=0
this I had to do because if I didn't my machine would do a trap12
right after detecting the array adapter.
By essentially I mean that when I added it to my kernel config file (CPQ)
the make depend action came with the following error:
controller ida0 at isa? bio irq ? vector idaintr
disk id0 at ida0 drive 0
disk id1 at ida0 drive 1
disk id2 at ida0 drive 2
disk id3 at ida0 drive 3
options IDA_CUCKOO_MODE=0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4
device sio1 at isa? port "IO_COM2" tty flags 0x10 irq 3
options CONSPEED=9600 #default speed for serial console
(default 9600)
controller eisa0
device ep0 at eisa?
device ep0 at eisa?
controller pci0
controller ncr0
controller ppbus0
device lpt0 at ppbus?
device ppc0 at isa? port? tty irq 7
File CPQ saved.
root@enterprise# /usr/sbin/config -r CPQ
Removing old directory ../../compile/CPQ: Done.
CPQ:96: unknown option "IDA_CUCKOO_MODE"
Don't forget to do a ``make depend''
Kernel build directory is ../../compile/CPQ
___________how I solved this problem_______________
I changed another bit of code in ida.c
________________this:____________________________
/* IDA wdc vector stealing (cuckoo) control */
#define IDA_CUCKOO_NEVER 0 /* never steal wdc vectors */
#define IDA_CUCKOO_ROOTWD 1 /* steal iff rootdev is wd device */
#define IDA_CUCKOO_ROOTNOTIDA 2 /* steal if rootdev not ida device
*/
#define IDA_CUCKOO_ALWAYS 3 /* always steal wdc vectors */
#ifndef IDA_CUCKOO_MODE
#define IDA_CUCKOO_MODE IDA_CUCKOO_ALWAYS
#endif
________________into this:_____________________
/* IDA wdc vector stealing (cuckoo) control */
#define IDA_CUCKOO_NEVER 0 /* never steal wdc vectors */
#define IDA_CUCKOO_ROOTWD 1 /* steal iff rootdev is wd device */
#define IDA_CUCKOO_ROOTNOTIDA 2 /* steal if rootdev not ida device */
#define IDA_CUCKOO_ALWAYS 3 /* always steal wdc vectors */
#ifndef IDA_CUCKOO_MODE
#define IDA_CUCKOO_MODE IDA_CUCKOO_NEVER
/* IDA_CUCKOO_ALWAYS */
#endif
________________now there's more___________________________________
no ida or id devices are in /dev
I can't make them with MAKEDEV
How do I make them. Now my controller is found I'd like to use the storage
space;)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199911190220.SAA48043>