Date: Wed, 19 Nov 2003 23:29:52 +0100 From: "un1du2el" <un1du2el@gmx.net> To: Gary Jennejohn <garyj@jennejohn.org> Cc: freebsd-isdn@freebsd.org Subject: Re: how dangerous would it be to switch to 5.1-current? Message-ID: <20031119222937.A34D21C8A98@mail-in-03.arcor-online.net> In-Reply-To: <200311190916.hAJ9GXRV002217@peedub.jennejohn.org> References: <200311190916.hAJ9GXRV002217@peedub.jennejohn.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------070907010909060109070302 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit I've just tried to use an isppp setup with 5.1-R and the same thing happens. In fact it fails on first attempt, dials a second time, the connection is closed from the other side and the nothing ever happens again (no dialouts etc.). Attached is a redirected log output from isdnd. I use this card: isic0 at port 0x1b00-0x1b1f,0x16e0-0x16ff,0x6e0-0x6ff,0xee0-0xeff, 0x1300-0x131f,0x300-0x31f,0xb00-0xb1f irq 5 flags 0x4 on isa0 isic0: passive stack unit 0 isic0: AVM A1 or Fritz!Card Classic The same setup works perfectly with 4.9-R. Markus D. Gary Jennejohn wrote: > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > Markus Dolze writes: > >>I have just tried to upgrade to 5.1-RELEASE (no patches yet). >> >>I use rbch to connect via user-land ppp (tun0). If I try to make a >>connection, I get the error: >> >>Nov 19 00:16:23 <kern.crit> arwen kernel: i4b-L3 T303_timeout: SETUP not >>answered, cr = 73 >>Nov 19 00:16:23 <kern.crit> arwen kernel: i4b-L3 next_l3state: FSM >>illegal state, state = ST_U0 - Null, event = EV_T303EXP - T303 timeout! >> >>And the call is disconnected. PPP then tries to redial and the >>connection is established. >> >>Attached are hints (from device.hints), kernel and isdnd.rc config >>files. I use an old non-pnp AVM Fritz card (isic-driver). >> >>Any help? >> > > > Does this happen _every_ time? > > Are you using rbch and ppp for channel bonding? If not I'd suggest > using an isp interface. That's the way I do it. > > --- > Gary Jennejohn / garyj[at]jennejohn.org gj[at]freebsd.org gj[at]denx.de > > _______________________________________________ > freebsd-isdn@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isdn > To unsubscribe, send any mail to "freebsd-isdn-unsubscribe@freebsd.org" > > --------------070907010909060109070302 Content-Type: text/plain; name="isdnd" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="isdnd" 19.11.2003 23:10:08 DMN init_controller_state: controller 0 is AVM A1 or Fritz!Card 19.11.2003 23:10:08 DMN i4b isdn daemon started (pid = 203) 19.11.2003 23:10:10 DBG msg_dialout: dial req from isp, unit 0 19.11.2003 23:10:10 DBG setup_dialout: entry I4ARCOR ok! 19.11.2003 23:10:10 DBG find_by_device_for_dialout: found entry 0! 19.11.2003 23:10:10 DBG FSM event [msg-dialout]: [idle => dialing] 19.11.2003 23:10:10 DBG F_DIAL: local dial out request 19.11.2003 23:10:10 DBG select_first_dialno: only one no, no = 0192071 19.11.2003 23:10:10 CHD 00001 I4ARCOR rate 0 sec/unit (conf) 19.11.2003 23:10:10 DBG sendm_connect_req: ctrl = 0, chan = -1 19.11.2003 23:10:10 DBG decr_free_channels: ctrl 0, now 1 chan free 19.11.2003 23:10:10 CHD 00001 I4ARCOR dialing out from 8868907 to 0192071 19.11.2003 23:10:10 DBG msg_teiasg_ind: unit 0, tei = 70 19.11.2003 23:10:10 DBG msg_l12stat_ind: unit 0, layer 2, state 1 19.11.2003 23:10:11 CHD 00001 I4ARCOR outgoing call disconnected (remote) 19.11.2003 23:10:11 CHD 00001 I4ARCOR cause 43: Access information discarded (Q.850) 19.11.2003 23:10:11 ERR set_channel_busy: controller [0] invalid channel [-1]! 19.11.2003 23:10:11 DBG incr_free_channels: ctrl 0, now 2 chan free 19.11.2003 23:10:11 DBG F_DFL: dial fail, dial retry 19.11.2003 23:10:11 DBG select_next_dialno: only one no, no = 0192071 19.11.2003 23:10:11 DBG FSM (SUSE) event [msg-disc-ind]: [dialing => waitdialretry] 19.11.2003 23:10:16 DBG handle_reserved: entry I4ARCOR, dial retry request! 19.11.2003 23:10:16 DBG setup_dialout: entry I4ARCOR ok! 19.11.2003 23:10:16 CHD 00002 I4ARCOR rate 0 sec/unit (conf) 19.11.2003 23:10:16 DBG sendm_connect_req: ctrl = 0, chan = -1 19.11.2003 23:10:16 DBG decr_free_channels: ctrl 0, now 1 chan free 19.11.2003 23:10:16 CHD 00002 I4ARCOR dialing out from 8868907 to 0192071 19.11.2003 23:10:16 DBG set_channel_busy: controller [0] channel B1 set to BUSY! 19.11.2003 23:10:16 CHD 00002 I4ARCOR outgoing call proceeding (ctl 0, ch 0) 19.11.2003 23:10:17 DBG set_channel_busy: controller [0] channel B1 already busy! 19.11.2003 23:10:17 CHD 00002 I4ARCOR outgoing call active (ctl 0, ch 0, isp0) 19.11.2003 23:10:17 DBG FSM event [msg-con-act-ind]: [dialretry => connected] 19.11.2003 23:10:17 DBG F_DOK: dial out ok 19.11.2003 23:10:17 DBG select_this_dialno: index = 0, no = 0192071 19.11.2003 23:10:17 CHD 00002 I4ARCOR outgoing call disconnected (remote) 19.11.2003 23:10:17 CHD 00002 I4ARCOR cause 16: Normal call clearing (Q.850) 19.11.2003 23:10:17 CHD 00002 I4ARCOR charging: 0 units, 0 seconds 19.11.2003 23:10:17 CHD 00002 I4ARCOR accounting: in 133, out 103 (in 0, out 0) 19.11.2003 23:10:17 DBG set_channel_idle: controller [0] channel B1 set to IDLE! 19.11.2003 23:10:17 DBG incr_free_channels: ctrl 0, now 2 chan free 19.11.2003 23:10:17 DBG FSM event [msg-disc-ind]: [connected => idle] 19.11.2003 23:10:17 DBG F_IDIS: disconnect indication 19.11.2003 23:11:00 DMN daemon terminating, exitval = 0 --------------070907010909060109070302--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031119222937.A34D21C8A98>