Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 29 Sep 2002 09:25:19 -0400 (EDT)
From:      John Bleichert <syborg@stny.rr.com>
To:        Bob Bomar <bulldog@fxp.org>
Cc:        questions@FreeBSD.ORG
Subject:   Re: NIC not found
Message-ID:  <Pine.LNX.4.44.0209290923560.5158-100000@janeway.vonbek.dhs.org>
In-Reply-To: <20020929081312.GB93277@peitho.fxp.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 29 Sep 2002, Bob Bomar wrote:

> Date: Sun, 29 Sep 2002 04:13:12 -0400
> From: Bob Bomar <bulldog@fxp.org>
> To: questions@FreeBSD.ORG
> Subject: Re: NIC not found
> 
> On Sat, Sep 28, 2002 at 03:52:23AM -0700, Doug White wrote:
> > On Sat, 28 Sep 2002, Bob Bomar wrote:
> > 
> > > On Fri, Sep 27, 2002 at 02:01:26PM -0700, Doug White wrote:
> > > > pciconf -lv output?
> > > >
> > >
> > > I cant get past the install, I cant select the NIC to use because
> > > it can not assign the resource.  Is there a work around for this?
> > 
> > Can you get the info from your 4.7RC install? (it may just be pciconf -l
> > there.)  I can't really do anything unless I can determine what the PCI
> > IDs are that its looking for.
> > 
> 
> Sorry, I miss understood.  Here it is:
> 
> fxp0@pci0:11:0: class=0x020000 card=0x10308086 chip=0x10308086 rev=0x08 hdr=0x00
>     vendor   = 'Intel Corporation'
>     device   = '82559 PCI Networking device'
>     class    = network
>     subclass = ethernet
> 

Since you've said "it can not assign the resource" your best bet is to 
disable 'PnP OS' in your BIOS and then restart the install. This was not 
necessary for me in 4.5 (disabling PnP) but was, on the same hardware, for 
4.6.x.

HTH - JB

#  John Bleichert 
#  http://vonbek.dhs.org/latest.jpg


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.44.0209290923560.5158-100000>