Date: Mon, 4 Sep 2017 10:46:37 +0930 From: "Priyadarshana Chandrasena" <vpc@ulka.com.au> To: "'Warner Losh'" <imp@bsdimp.com> Cc: "'Maciej Suszko'" <maciej@suszko.eu>, "'FreeBSD-STABLE Mailing List'" <FreeBSD-stable@freebsd.org> Subject: RE: HP Smart array P440 support Message-ID: <002601d3251b$77eb9970$67c2cc50$@ulka.com.au> In-Reply-To: <CANCZdfrtY27jb8gieCXT_HK2jFmuAwLpK-%2BmjRoRR4TArCScZA@mail.gmail.com> References: <001501d323f2$3e517560$baf46020$@ulka.com.au> <20170903211908.510b5724@leo> <001c01d3251a$92d20090$b87601b0$@ulka.com.au> <CANCZdfrtY27jb8gieCXT_HK2jFmuAwLpK-%2BmjRoRR4TArCScZA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
It is saying that missing bootable media and what is found is not UEFI.=20 =20 From: wlosh@bsdimp.com [mailto:wlosh@bsdimp.com] On Behalf Of Warner = Losh Sent: Monday, 4 September 2017 10:44 AM To: Priyadarshana Chandrasena Cc: Maciej Suszko; FreeBSD-STABLE Mailing List Subject: Re: HP Smart array P440 support =20 Our UEFI stuff is designed so that the defaults will just work... I find = it odd that your computer doesn't work with the defaults. IT's BIOS = doesn't even consider the USB drive a bootable device? =20 Warner =20 =20 On Sun, Sep 3, 2017 at 7:10 PM, Priyadarshana Chandrasena = <vpc@ulka.com.au> wrote: I tried to install 11.1 but I still have the same error. UEFI boot mode = does not see my usb bootable media as of type UEFI. So still the Legacy BIOS = is the only option. Do I need to create the usb UEFI when I create the usb = boot disk?. -----Original Message----- From: Maciej Suszko [mailto:maciej@suszko.eu] Sent: Monday, 4 September 2017 4:49 AM To: Priyadarshana Chandrasena Cc: FreeBSD-stable@FreeBSD.org Subject: Re: HP Smart array P440 support "Priyadarshana Chandrasena" <vpc@ulka.com.au> wrote: > I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it. > I have a HP smart array P440 in my server. I can not find out anywhere > if ciss driver support include HP Gen 9 storage controllers. Could > you please update the ciss driver in 10.3? Hi, Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array). In a few days I plan to boot it in HBA mode, we'll see if it's working. A few messages: #v+ root@storage-04:~ # uname -a FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed = Feb 22 06:12:04 UTC 2017 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 root@storage-04:~ # grep ciss /var/run/dmesg.boot ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 = on pci2 ciss0: PERFORMANT Transport da2 at ciss0 bus 0 scbus2 target 0 lun 0 root@storage-04:~ # camcontrol inquiry da2 pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device pass2: Serial Number PDNMF0ARH401MI pass2: 135.168MB/s transfers, Command Queueing Enabled #v- -- regards, Maciej Suszko. _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to = "freebsd-stable-unsubscribe@freebsd.org" =20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002601d3251b$77eb9970$67c2cc50$>