Date: Wed, 14 Nov 2001 10:15:13 -0800 From: "Victor E. Vaile, IV" <victor@d2.com> To: "freebsd-stable@FreeBSD.ORG" <freebsd-stable@FreeBSD.ORG> Subject: kernel hang with pcm Message-ID: <3BF2B4B1.2DA9A2F1@d2.com>
next in thread | raw e-mail | index | archive | help
Hello,
I've got an intel D815EEA2 motherboard (intel 815E chipset) and I've
installed 4.4-RELEASE, and since then cvsupped to stable. Whenever I
build a kernel with pcm (the only change from GENERIC), the kernel hangs
most of the time just before the ata devices. It's never booted twice
in a row with that kernel, and generic works fine. Also, I find that
the few times that it has booted, mpg123 plays mp3 files too fast. I've
found a couple different references from people with similar problems,
but no solutions so far. Does anyone know of a fix for either of
these? Thanks.
-Victor
Following is dmesg output while booting the GENERIC kernel:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.4-STABLE #0: Tue Nov 13 17:13:25 GMT 2001
Rvev@vev.sigbus.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (996.77-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536608768 (524032K bytes)
avail memory = 517881856 (505744K bytes)
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f2ea0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci2: <PCI bus> on pcib1
pci2: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on
pci0
pci1: <PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xdf00-0xdf3f mem
0xfc9ef000-0xfc9effff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:a7:0d:2f
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <unknown card> (vendor=0x14f1, dev=0x1033) at 13.0 irq 11
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0xef40-0xef5f irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
0xef80-0xef9f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <Xerox WorkCentre XE Series/201.10> RASTER
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 57241MB <ST360021A> [116301/16/63] at ata0-master UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W1610A> at ata1-master using PIO4
acd1: DVD-ROM <DVDROM 12X> at ata1-slave using PIO4
Mounting root from ufs:ad0s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BF2B4B1.2DA9A2F1>