Date: Mon, 04 Oct 2004 13:41:08 +0200 From: Ralf Wenk <RZ-FreeBSD1004@fh-karlsruhe.de> To: FreeBSD-gnats-submit@FreeBSD.org Cc: Ralf Wenk <RZ-FreeBSD1004@fh-karlsruhe.de> Subject: kern/72301: Cardbus card activation broken with FreeBSD 5.3-BETA7 Message-ID: <E1CERDI-0000GE-F4@localhost> Resent-Message-ID: <200410041150.i94BoNPF040193@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72301
>Category: kern
>Synopsis: Cardbus card activation broken with FreeBSD 5.3-BETA7
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Oct 04 11:50:23 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Ralf Wenk
>Release: FreeBSD 5.3-BETA7 i386
>Organization:
FH Karlsruhe, University of Applied Sciences
>Environment:
System: FreeBSD rz-tp390x 5.3-BETA7 FreeBSD 5.3-BETA7 #4: Sun Oct 3 22:54:47 CEST 2004 root@:/usr/src/sys/i386/compile/GENERIC
on a IBM ThinkPad 390X
>Description:
FreeBSD 5.3-BETA7 breaks cardbus card activation leaving machine without
network interface. FreeBSD 5.2.1-RELEASE-p10 works as shown.
Booting the 5.2.1-RELEASE-p10 kernel shows
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p10 #12: Sat Oct 2 11:40:51 CEST 2004
root@rz-tp390x:/usr/src/sys/i386/compile/tp390x
Preloaded elf kernel "/boot/kernel.521.old/kernel" at 0xc07a6000.
Preloaded elf module "/boot/kernel.521.old/snd_solo.ko" at 0xc07a61fc.
Preloaded elf module "/boot/kernel.521.old/snd_pcm.ko" at 0xc07a62b4.
Preloaded elf module "/boot/kernel.521.old/apm.ko" at 0xc07a6368.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (398.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (191 MB)
avail memory = 190033920 (181 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdf40
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:2 INTD BIOS irq 11
pci_cfgintr: 0:3 INTA BIOS irq 11
pci_cfgintr: 0:3 INTA BIOS irq 11
pci_cfgintr: 0:6 INTA BIOS irq 11
pci_cfgintr: 0:7 INTA BIOS irq 5
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:0 INTA BIOS irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x10c0-0x10cf at device 2.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 11 at device 2.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached)
cbb0: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
pci0: <simple comms> at device 6.0 (no driver attached)
pcm0: <ESS Solo-1 (unknown vendor)> port 0x10f8-0x10fb,0x10fc-0x10ff,0x10d0-0x10df,0x10e0-0x10ef,0x1080-0x10bf irq 5 at device 7.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <IBM3780> can't assign resources (irq)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
cbb1: bad Vcc request. ctrl=0x33, status=0x30000b20
cbb_power: 3V
dc0: <Xircom X3201 10/100BaseTX> port 0x1100-0x117f mem 0x88002000-0x880027ff,0x88002800-0x88002fff irq 11 at device 0.0 on cardbus1
dc0: Ethernet address: 00:06:29:52:42:e4
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
GEOM: create disk ad0 dp=0xc235e660
ad0: 6194MB <IBM-DBCA-206480> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
while booting the 5.3-BETA kernel shows
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #4: Sun Oct 3 22:54:47 CEST 2004
root@:/usr/src/sys/i386/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (398.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (191 MB)
avail memory = 187277312 (178 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at d
evice 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x10c0-0x10cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 11 at device 2.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x1040-0x104f at device 2.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
cbb0: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb_power_call: 0V
cbb0: bad Vcc request. ctrl=0xf000ff00, status=0xf000e2c3
cbb_power: 0V
cbb1: <TI1251B PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb_power_call: 0V
cbb1: bad Vcc request. ctrl=0x7200700, status=0x7200720
cbb_power: 0V
pci0: <simple comms> at device 6.0 (no driver attached)
pcm0: <ESS Solo-1 (unknown vendor)> port 0x10f8-0x10fb,0x10fc-0x10ff,0x10d0-0x10df,0x10e0-0x10ef,0x1080-0x10bf irq 5 at device 7.0 on pci0
pcm0: [GIANT-LOCKED]
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
ahc0: No resources allocated.
ahc0: No resources allocated.
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
ahc0: No resources allocated.
unknown: <IBM3780> can't assign resources (irq)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
cbb1: bad Vcc request. ctrl=0xf200f00, status=0xf200f20
cbb_power: 0V
cbb1: bad Vcc request. ctrl=0xf200f33, status=0xf200f20
cbb_power: 3V
cbb1: bad Vcc request. ctrl=0xf200f00, status=0xf200f20
cbb_power: 0V
cbb1: CardBus card activation failed
ad0: 6194MB <IBM-DBCA-206480/BC4OA87F> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241B/1.22a> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
>How-To-Repeat:
Do an update from RELENG_5_2 to RELENG_5.
You will possible need the same hardware to repeat.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1CERDI-0000GE-F4>