Date: Wed, 17 Apr 2002 19:43:13 +0200 From: Alessandro de Manzano <adm@unixmania.net> To: Thorsten Greiner <Thorsten.Greiner@consol.de> Cc: mobile@freebsd.org, stable@freebsd.org Subject: Re: USB problem on Asus notebook Message-ID: <20020417194313.A70169@libero.sunshine.ale> In-Reply-To: <20020417091546.A21167@hilden.rtg.consol.de>; from Thorsten.Greiner@consol.de on Wed, Apr 17, 2002 at 09:15:46AM %2B0200 References: <20020416192109.A65371@libero.sunshine.ale> <20020416192949.B65371@libero.sunshine.ale> <20020417091546.A21167@hilden.rtg.consol.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Apr 17, 2002 at 09:15:46AM +0200, Thorsten Greiner wrote: > please look into PR 33004. You will find there a patch which will fix your > problem. Actually I am writing this from an ASUS L7300 with an Logitech > USB mouse... Wonderful ! :-) I've just patched the kernel and it works great ! :) I really hope to see this patch commited soon ! Thanks a lot! > On Tue, Apr 16, 2002 at 07:29:49PM +0200, Alessandro de Manzano wrote: > > On Tue, Apr 16, 2002 at 07:21:09PM +0200, Alessandro de Manzano wrote: > > > > Uops, sorry, I forgot to include the complete dmesg report, could be > > more useful... here it is: > > > > (note the "pci_cfgintr" messages) > > > > > > Copyright (c) 1992-2002 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 4.5-RELEASE-p2 #0: Thu Apr 11 22:16:28 CEST 2002 > > root@asus.sunshine.ale:/usr/obj/usr/src/sys/ASUS > > Timecounter "i8254" frequency 1193182 Hz > > CPU: Pentium III/Pentium III Xeon/Celeron (498.16-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > > real memory = 201261056 (196544K bytes) > > avail memory = 191844352 (187348K bytes) > > Preloaded elf kernel "kernel" at 0xc03cc000. > > Preloaded userconfig_script "/boot/kernel.conf" at 0xc03cc09c. > > VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc00c8ca7 (c0008ca7) > > VESA: Silicon Motion SM710 VGA BIOS > > Pentium Pro MTRR support enabled > > md0: Malloc disk > > Using $PIR table, 7 entries at 0xc00fdf50 > > apm0: <APM BIOS> on motherboard > > apm: found APM BIOS v1.2, connected at v1.2 > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > pcib0: <Intel 82443MX host to PCI bridge> on motherboard > > pci0: <PCI bus> on pcib0 > > pcm0: <Intel 443MX> port 0x1000-0x103f,0x1400-0x14ff irq 15 at device 0.1 on pci0 > > pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 0.2 > > pci0: <VGA-compatible display device> at 2.0 > > isab0: <Intel 82443MX PCI to ISA bridge> at device 7.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel PIIX4 ATA33 controller> port 0x1800-0x180f at device 7.1 on pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > uhci0: <Intel 82443MX USB controller> port 0x1c00-0x1c1f at device 7.2 on pci0 > > pci_cfgintr_linked: linked (63) to hard-routed irq 11 > > pci_cfgintr: 0:7 INTD routed to irq 11 > > usb0: <Intel 82443MX USB controller> on uhci0 > > usb0: USB revision 1.0 > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > uhub0: device problem, disabling port 1 > > chip1: <Intel 82443MX Power management controller> port 0x2180-0x218f at device 7.3 on pci0 > > pci0: <unknown card> (vendor=0x134d, dev=0x7890) at 9.0 irq 10 > > pci_cfgintr_linked: linked (60) to hard-routed irq 11 > > pci_cfgintr: 0:10 INTA routed to irq 11 > > pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0 > > pcic0: PCI Memory allocated: 0x44000000 > > pccard0: <PC Card bus (classic)> on pcic0 > > pci_cfgintr_search: linked (62) to configured irq 11 at 0:10:0 > > pci_cfgintr: 0:10 INTB routed to irq 11 > > pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 11 at device 10.1 on pci0 > > pcic1: PCI Memory allocated: 0x44001000 > > pccard1: <PC Card bus (classic)> on pcic1 > > orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 > > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model GlidePoint, device ID 0 > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > DUMMYNET initialized (011031) > > BRIDGE 011031, have 3 interfaces > > IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default > > IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled > > ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable > > ad0: 5729MB <IBM-DARA-206000> [12416/15/63] at ata0-master UDMA33 > > acd0: CDROM <CD-224E> at ata0-slave using PIO4 > > Mounting root from ufs:/dev/ad0s1a > > pccard: card inserted, slot 1 > > ed1 at port 0x300-0x31f irq 11 flags 0x80000 slot 1 on pccard1 > > BRIDGE 011031, have 4 interfaces > > -- index 4 type 6 phy 0 addrl 6 addr 00.e0.98.39.07.df > > ed1: address 00:e0:98:39:07:df, type Linksys (16 bit) > > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > > -- > Mit freundlichen Gruessen / Best regards > > Thorsten Greiner > > ----------------------------------------------------------------- > Thorsten.Greiner@consol.de ConSol* Software GmbH > Phone +49 2102/994-421 Consulting & Solutions > Fax +49 2102/994-411 Berliner Str. 101 > http://www.consol.de D-40880 Ratingen -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020417194313.A70169>