Date: Tue, 26 Nov 1996 14:21:57 -0800 (PST) From: miketsho@erols.com To: freebsd-gnats-submit@freebsd.org Subject: bin/2107: problem building a system from cdrom. Message-ID: <199611262221.OAA00677@freefall.freebsd.org> Resent-Message-ID: <199611262230.OAA02252@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 2107 >Category: bin >Synopsis: problem building a system from cdrom. >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Tue Nov 26 14:30:04 PST 1996 >Last-Modified: >Originator: Michael Thompson >Organization: >Release: 2.1.5 >Environment: system not built >Description: PROBLEM: Tring to install FreeBSD 2.1.5 from cdrom to harddisk. At a point during the data transfer I start getting errors. It all goes well until it gets to downloading /sbin/disklabel ---- then I get the following errors: /stand/cpio: invalid header: checksum error atapi0.1: no cmd drq /stand/cpio: warning: skipped 65536 bytes of junk gunzip: stdin: invalid compressed data--format violated DEBUG: switching back to VTY1 /stand/cpio: premature end of file --------------------------------------------------- System: US. Logic PCI Motherboard w/Pentium Processor 120 mhz Primary HD 504 megabytes -- MSDOS only. Secondary HD 2.1 Gigabytes -- FreeBSD partition only. IDE CDROM drive NEC MultiSpin 8V. iomega Ditto tape drive with Ditto interface board. 1.44 meg floppy drive. 32meg ram. ----------------------------------------------------- System runs well under DOS with out errors. I have tried this with DOS partition on the small drive and a 450 meg DOS partition on the large drive. I have also tried a DOS partition on the small drive and FreeBSD partition on the large drive with the same errors resulting in both cases. ----------------------------------------------------- The large drive was setup with the following BSD partitions: / ---- root was 32 meg swap ---- swap was 72 meg /var ---- var was 30 meg /usr ---- usr was about 1800 meg or more. ------------------------------------------------------ I'm sure this is not all of the information that you will need but its all that I could think of at the moment. Please contact me at the e-mail address below or at the phone number also listed below. Thanks for your help. Michael Thompson E-mail miketsho@erols.com phone (703) 368-5256 >How-To-Repeat: very repeatable - not able to build system. >Fix: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199611262221.OAA00677>