Date: Mon, 19 Mar 2001 11:02:02 -0800 From: Soren Kristensen <soren@soekris.com> To: freebsd-net@FreeBSD.ORG Subject: Re: Moving ethernet cable between cards, ARP problem ? Message-ID: <3AB657AA.345BE49C@soekris.com> References: <3AB5D441.BA3C43B1@soekris.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Just a follow up with more information.... The status do change to active when I move the cable from one interface to another, so there is physical connection. Output from "ifconfig -a": sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::200:24ff:fec0:0%sis0 prefixlen 64 scopeid 0x1 ether 00:00:24:c0:00:00 media: autoselect (100baseTX) status: active supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UT P <full-duplex> 10baseT/UTP none sis1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.21 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::200:24ff:fec0:1%sis1 prefixlen 64 scopeid 0x2 ether 00:00:24:c0:00:01 media: autoselect (none) status: no carrier supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UT P <full-duplex> 10baseT/UTP none sis2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.22 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::200:24ff:fec0:2%sis2 prefixlen 64 scopeid 0x3 ether 00:00:24:c0:00:02 media: autoselect (none) status: no carrier supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UT P <full-duplex> 10baseT/UTP none ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 faith0: flags=8000<MULTICAST> mtu 1500 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 gif2: flags=8010<POINTOPOINT,MULTICATT> mtu 1280 gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 Thanks, Soren Kristensen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AB657AA.345BE49C>