Date: Fri, 10 Aug 2012 11:40:37 +0200 From: "Christoph P.U. Kukulies" <kuku@kukulies.org> To: freebsd-questions@freebsd.org Subject: Re: weird problem with 9.0 Release and ed0 Message-ID: <5024D715.9030409@kukulies.org> In-Reply-To: <5024D442.6090707@kukulies.org> References: <5024D442.6090707@kukulies.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Am 10.08.2012 11:28, schrieb Christoph P.U. Kukulies:
> The problem need not to be confined to 9.0. It stated to develop under
> 5.1 already.
read: started to develop...
>
> I'm running a natd gateway machine that was developing strange
> behaviour such that the
> outside interface (ed0, BNC connector) that was connected via a small
> media converter switch to
> the providers sync line had dropouts. The machine couldn't ping into
> the Internet and also couldn't be pinged.
>
> I first thought it was the switch/media converter, but another
> (Windows XP) machine that was on the
> same BNC cable worked flawlessly.
>
> So I decided to migrate that 5.1 machine to a 9.0 machine. The
> situation now is that I have the9.0 machine
> at the BNC cable and simultanously the old FreeBSD 5.1 gateway on the
> same BNC cable but through a
> TP adapter. This was the old machine works fine and I can care about
> the new machine.
>
> Is there a known problem with ed0 cards that have the Realtek 8029
> chipset. Do they need some
> special flags like memory mapping or irq?
>
> When I for example boot the 9.0 machine the comping up of the em0 (on
> mainboard interface results in a highlighted
> kernel message on the console. The coming up of the ed0 is not flagged
> this way. And as a result the
> ed0 interface seems to be dead.
>
>
> Here some excerpts of dmesg:
> em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x4400-0x441f
> mem 0x93100000-0x9311ffff,0x93124000-0x93124fff irq 20 at device 25.0
> on pci0
> em0: Using an MSI interrupt
> em0: Ethernet address: 00:1c:c0:37:b2:9f
>
> ed0: <RealTek 8029> port 0x1000-0x101f irq 22 at device 1.0 on pci7
> ed0: Ethernet address: 00:e0:7d:7c:2b:4a
>
> I also see this:
> Jul 30 23:03:54 forum ntpd[1711]: unable to create socket on ed0 (20)
> for fe80::
> 2e0:7dff:fe7c:2b4a#123
Forgot to add this info:
ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:e0:7d:7c:2b:4a
inet 80.72.44.230 netmask 0xfffffff0 broadcast 80.72.44.239
inet6 fe80::2e0:7dff:fe7c:2b4a%ed0 prefixlen 64 scopeid 0xa
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (10base2/BNC)
--
Christoph Kukulies
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5024D715.9030409>