Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 May 2012 08:31:01 +0200
From:      =?ISO-8859-1?Q?Fernando_Apestegu=EDa?= <fernando.apesteguia@gmail.com>
To:        Colin Barnabas <colin.barnabas@gmail.com>
Cc:        FreeBSD Questions <freebsd-questions@freebsd.org>
Subject:   Re: avrdude and arduino
Message-ID:  <CAGwOe2ahP-4UHyLwmGLMaaUZKRvALb=cuVgkSP9sqthdro4fRw@mail.gmail.com>
In-Reply-To: <20120513182051.GA63499@hs1.VERBENA>
References:  <20120513182051.GA63499@hs1.VERBENA>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Sun, May 13, 2012 at 8:20 PM, Colin Barnabas
<colin.barnabas@gmail.com> wrote:
> Has anyone been able to get the Arduino Uno board working with
> avrdude? I keep getting programmer not responding errors.

Not for the Uno, but I got Arduino Duemilanove working.

>
> avrdude: ser_recv(): programmer is not responding
> avrdude: stk500_recv(): programmer is not responding

This is typical when the microcontroller is somehow busy or stuck.

>
>
> This is the command I'm using:
>
> %sudo avrdude -F -v -v -v -v -c arduino -p ATMEGA328P -P /dev/cuaU0 -U flash:w:flash.hex

This is what I use for Duemilanove
sudo avrdude -V -F -c stk500v1 -p m168 -b 19200 -P /dev/cuaU0 -U
flash:w:flash.hex (Arduino)

I also have a Pololu 3pi[1] which uses an ATmega328 and I can download
the software into the
chip using this:

sudo avrdude -c avrispv2 -p m168 -P /dev/cuaU0 -U flash:w:test.hex  (Pololu)


HTH

[1] http://www.pololu.com/catalog/product/975

>
> Any suggestions would be much appreciated.
>
>
> --
> Colin Barnabas
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CAGwOe2ahP-4UHyLwmGLMaaUZKRvALb=cuVgkSP9sqthdro4fRw>