From owner-freebsd-alpha Mon Jun 24 12:27:58 2002 Delivered-To: freebsd-alpha@freebsd.org Received: from postfix1-2.free.fr (postfix1-2.free.fr [213.228.0.130]) by hub.freebsd.org (Postfix) with ESMTP id 8A21C37B403 for ; Mon, 24 Jun 2002 12:27:53 -0700 (PDT) Received: from imp1-2.free.fr (imp1-2.free.fr [213.228.0.151]) by postfix1-2.free.fr (Postfix) with ESMTP id E5E55AB6DF for ; Mon, 24 Jun 2002 21:27:51 +0200 (CEST) Received: by imp1-2.free.fr (Postfix, from userid 33) id CDE9F87396; Mon, 24 Jun 2002 21:27:51 +0200 (MEST) To: alpha@FreeBSD.ORG Subject: Digital StorageWorks 300AA & HSZ40C Message-ID: <1024946871.3d1772b7b3021@imp.free.fr> Date: Mon, 24 Jun 2002 21:27:51 +0200 (MEST) From: ANTOINE Pierre MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.6 X-Originating-IP: 172.133.166.107 Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hi, My Alpha 2100A perfectly boot with FreeBSD 4.6, my problem (previous mail) was: "Put the VGA PCI card in first PCI block"! I've surf a while before founding how to configure RAID on the mylex controller, but it's finaly done. Now, I'm seeking informations about a Digital StorageWorks 300AA hooked to a PCI card: KZPSA SCSI Controller. Is this StorageWorks Arrays supported on FreeBSD ? Has anyone an StorageWorks working with his alpha server ? Can you see disks in SRM or you needs to access it via a special driver ? On the server, I can see the SCSI interface KZPSA as pkb, doing show FRU, and show CONFIG, but no disks. I've hook a serial terminal to the Digital StorageWorks 300AA, playing at 9600 bauds and get a prompt. Any command fail and suggest to do a "SHOW THIS_CONTROLLER" so i give you the result: HSZ40C>SHOW THIS_CONTROLLER Controller: HSZ40 ZG61200481 Firmware V34Z-0, Hardware A02 Not configured for dual-redundancy SCSI address 7 Time: NOT SET Host port: SCSI target(s) (0), Preferred target(s) (0) TRANSFER_RATE_REQUESTED = 10MHZ Cache: 32 megabyte write cache, version 2 Cache is INVALID. Cache containing unflushed data has been removed from this controller Battery is FAILED Unknown unflushed data in cache CACHE_FLUSH_TIMER = DEFAULT (10 seconds) CACHE_POLICY = A NOCACHE_UPS Host Functionality Mode = A This controller has an invalid cache module Invalid cache -- CLI command set reduced. Type SHOW THIS_CONTROLLER. Please- see user guide to determine corrective action HSZ40C> Thanks for your tips. ---------------- ANTOINE Pierre nunux@free.fr --------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message