Date: Thu, 9 May 2002 09:02:11 -0500 From: "Schroeder, Aaron" <Aaron.Schroeder@qg.com> To: "'gnome@freebsd.org'" <gnome@freebsd.org> Subject: FW: Make failed on nautilus for FreeBSD/Alpha Message-ID: <1F095B0753FCD411857700010333058A04EEC6AF@waexch1.qgraph.com>
next in thread | raw e-mail | index | archive | help
Hello,
I was trying to install Nautilus onto my FreeBSD 4.5-STABLE machine and I
received a stop error code. I was told to send mail with the make error and
the config.log files. I am a newbie at FreeBSD, actually, I am a newbie at
unix, so I am not sure what you need from me at this time besides the output
files. I also am attaching my dmesg output as well.
My machine is a Digital PWS 500au.
-------------------------------------------------------------------------
Here is the make output:
===> Configuring for nautilus-1.0.6_5
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c -o root -g
wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking whether to enable maintainer-specific portions of Makefiles... no
checking for Cygwin environment... no
checking for mingw32 environment... no
checking how to run the C preprocessor... cc -E
checking host system type... alpha-portbld-freebsd4.5
checking build system type... alpha-portbld-freebsd4.5
checking for gcc... cc
checking whether the C compiler (cc -O -pipe -mcpu=ev4 ) works... no
configure: error: installation or configuration problem: C compiler cannot
create executables.
===> Script "configure" failed unexpectedly.
Please report the problem to gnome@FreeBSD.org [maintainer] and attach
the "/usr/ports/x11-fm/nautilus/work/nautilus-1.0.6/config.log"
including
the output of the failure of your make command. Also, it might be a
good
idea to provide an overview of all packages installed on your system
(e.g. an `ls /var/db/pkg`).
*** Error code 1
Stop in /usr/ports/x11-fm/nautilus.
-----------------------------------------------------------------------
Here is the config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:828: checking for a BSD compatible install
configure:881: checking whether build environment is sane
configure:938: checking whether gmake sets ${MAKE}
configure:984: checking for working aclocal
configure:997: checking for working autoconf
configure:1010: checking for working automake
configure:1023: checking for working autoheader
configure:1036: checking for working makeinfo
configure:1054: checking whether to enable maintainer-specific portions of
Makefiles
configure:1101: checking for Cygwin environment
configure:1117: cc -c -O -pipe -mcpu=ev4 -I/usr/local/include -fno-rtti
-fno-exceptions conftest.c 1>&5
configure: In function `main':
configure:1113: `__CYGWIN32__' undeclared (first use in this function)
configure:1113: (Each undeclared identifier is reported only once
configure:1113: for each function it appears in.)
configure: failed program was:
#line 1106 "configure"
#include "confdefs.h"
int main() {
#ifndef __CYGWIN__
#define __CYGWIN__ __CYGWIN32__
#endif
return __CYGWIN__;
; return 0; }
configure:1134: checking for mingw32 environment
configure:1146: cc -c -O -pipe -mcpu=ev4 -I/usr/local/include -fno-rtti
-fno-exceptions conftest.c 1>&5
configure: In function `main':
configure:1142: `__MINGW32__' undeclared (first use in this function)
configure:1142: (Each undeclared identifier is reported only once
configure:1142: for each function it appears in.)
configure: failed program was:
#line 1139 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
configure:1163: checking how to run the C preprocessor
configure:1184: cc -E -I/usr/local/include -fno-rtti -fno-exceptions
conftest.c >/dev/null 2>conftest.out
configure:1295: checking host system type
configure:1316: checking build system type
configure:1336: checking for gcc
configure:1449: checking whether the C compiler (cc -O -pipe -mcpu=ev4 )
works
configure:1465: cc -o conftest -O -pipe -mcpu=ev4 -I/usr/local/include
-fno-rtti -fno-exceptions conftest.c -pthread -L/usr/local/lib
-L/usr/X11R6/lib -liconv 1>&5
/usr/libexec/elf/ld: cannot find -liconv
configure: failed program was:
#line 1460 "configure"
#include "confdefs.h"
main(){return(0);}
-------------------------------------------------------------------------
Here is my dmesg output
Unrecognized boot flag '0'.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #1: Thu May 2 09:06:33 CDT 2002
ajschroe@diabloii.qgraph.com:/usr/obj/usr/src/sys/DIABLOII_KERNEL
Digital Personal Workstation (Miata)
Digital Personal WorkStation 500au, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX>
OSF PAL rev: 0x1000000020116
real memory = 1071800320 (1046680K bytes)
avail memory = 1037336576 (1013024K bytes)
Preloaded elf kernel "kernel" at 0xfffffc0000764000.
md0: Malloc disk
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
dc0: <Intel 21143 10/100BaseTX> port 0x9000-0x907f mem 0x80154000-0x8015407f
irq 0 at device 3.0 on pci0
dc0: interrupting at CIA irq 0
dc0: Ethernet address: 00:00:f8:75:94:e2
miibus0: <MII bus> on dc0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <CMD 646 ATA controller> port 0x9080-0x908f irq 1 at device 4.0 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <Intel 82378IB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 12.0 irq 8
pcib1: <DEC 21052 PCI-PCI bridge> at device 20.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <DEC 21050 PCI-PCI bridge> at device 8.0 on pci1
pci2: <PCI bus> on pcib2
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem
0x80010000-0x80010fff irq 12 at device 0.0 on pci2
isp0: interrupting at CIA irq 12
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sbc0: <ESS ES1888> at port 0x220-0x22f irq 5 drq 1 on isa0
sbc0: interrupting at ISA irq 5
pcm0: <ESS 18xx DSP> on sbc0
Timecounter "alpha" frequency 499853504 Hz
acd0: CDROM <TOSHIBA CD-ROM XM-6102B> at ata0-master PIO3
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0a
da0 at isp0 bus 0 target 0 lun 0
da0: <Quantum XP34550W LYJ2> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
da1 at isp0 bus 0 target 1 lun 0
da1: <DEC RZ1CC-BA (C) DEC 880F> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
Enabled
da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
Thank you,
AJ Schroeder
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-gnome" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1F095B0753FCD411857700010333058A04EEC6AF>