Date: Thu, 20 Apr 2000 19:20:23 -0700 (PDT) From: claus@b5.nu To: freebsd-gnats-submit@FreeBSD.org Subject: i386/18123: 4.0-RELEASE crashes during boot from CD-ROM Message-ID: <200004210220.TAA09945@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 18123 >Category: i386 >Synopsis: 4.0-RELEASE crashes during boot from CD-ROM >Confidential: no >Severity: critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Apr 20 19:30:00 PDT 2000 >Closed-Date: >Last-Modified: >Originator: Claus Endres >Release: 4.0-RELEASE >Organization: >Environment: Released kernel off CD-ROM 1 >Description: Trying to boot off CD-ROM 1 in order to install 4.0. CPU halt after pci0:<NVidia/SGS-Thomson Riva128 Graphics acelerator> at 8.0 irq 9. Shouldn't that line above read: vga0:... ??? The system is running FreeBSD 3.3 (and a few other M$ OSes) fine. The 3.3 probe results are: Apr 21 11:54:36 ganymede /kernel: avail memory = 62234624 (60776K bytes) Apr 21 11:54:36 ganymede /kernel: Preloaded elf kernel "kernel" at 0xc02e5000. Apr 21 11:54:36 ganymede /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc02e509c. Apr 21 11:54:36 ganymede /kernel: Pentium Pro MTRR support enabled Apr 21 11:54:36 ganymede /kernel: Probing for devices on PCI bus 0: Apr 21 11:54:36 ganymede /kernel: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0 Apr 21 11:54:36 ganymede /kernel: chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 Apr 21 11:54:36 ganymede /kernel: ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1 Apr 21 11:54:36 ganymede /kernel: vga0: <VGA-compatible display device> rev 0x10 int a irq 9 on pci0.8.0 Apr 21 11:54:36 ganymede /kernel: Probing for PnP devices: Apr 21 11:54:36 ganymede /kernel: Probing for devices on the ISA bus: Apr 21 11:54:36 ganymede /kernel: sc0 on isa Apr 21 11:54:36 ganymede /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Apr 21 11:54:36 ganymede /kernel: ed0 at 0x300-0x31f irq 10 on isa Apr 21 11:54:36 ganymede /kernel: ed0: address 00:00:44:01:93:2a, type NE2000 (16 bit) Apr 21 11:54:36 ganymede /kernel: atkbdc0 at 0x60-0x6f on motherboard Apr 21 11:54:36 ganymede /kernel: atkbd0 irq 1 on isa Apr 21 11:54:36 ganymede /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa Apr 21 11:54:36 ganymede /kernel: sio0: type 16550A Apr 21 11:54:36 ganymede /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Apr 21 11:54:36 ganymede /kernel: sio1: type 16550A Apr 21 11:54:36 ganymede /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Apr 21 11:54:36 ganymede /kernel: fdc0: FIFO enabled, 8 bytes threshold Apr 21 11:54:36 ganymede /kernel: fd0: 1.44MB 3.5in Apr 21 11:54:36 ganymede /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa Apr 21 11:54:36 ganymede /kernel: wdc0: unit 0 (wd0): <FUJITSU MPB3064ATU E> Apr 21 11:54:36 ganymede /kernel: wd0: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S Apr 21 11:54:36 ganymede /kernel: wdc1 at 0x170-0x177 irq 15 on isa Apr 21 11:54:36 ganymede /kernel: wdc1: unit 1 (atapi): <MATSHITA CR-587/7R16>, removable, accel, dma, iordis Apr 21 11:54:36 ganymede /kernel: acd0: drive speed 4125KB/sec, 128KB cache Apr 21 11:54:36 ganymede /kernel: acd0: supported read types: CD-R, CD-RW, CD-DA Apr 21 11:54:36 ganymede /kernel: acd0: Audio: play, 256 volume levels Apr 21 11:54:36 ganymede /kernel: acd0: Mechanism: ejectable tray Apr 21 11:54:36 ganymede /kernel: acd0: Medium: no/blank disc inside, unlocked Apr 21 11:54:36 ganymede /kernel: ppc0 at 0x378 irq 7 flags 0x40 on isa Apr 21 11:54:36 ganymede /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Apr 21 11:54:36 ganymede /kernel: lpt0: <generic printer> on ppbus 0 Apr 21 11:54:36 ganymede /kernel: lpt0: Interrupt-driven port Apr 21 11:54:36 ganymede /kernel: ppi0: <generic parallel i/o> on ppbus 0 Apr 21 11:54:36 ganymede /kernel: plip0: <PLIP network interface> on ppbus 0 Apr 21 11:54:36 ganymede /kernel: aha0 at 0x334-0x337 irq 11 drq 5 on isa Apr 21 11:54:36 ganymede /kernel: aha0: AHA-1542CF FW Rev. B.0 (ID=45) SCSI Host Adapter, SCSI ID 0, 16 CCBs Apr 21 11:54:36 ganymede /kernel: vga0 at 0x3c0-0x3df maddr 0xa0000 msize 131072 on isa Apr 21 11:54:36 ganymede /kernel: npx0 on motherboard Apr 21 11:54:36 ganymede /kernel: npx0: INT 16 interface Apr 21 11:54:36 ganymede /kernel: IPsec: Initialized Security Association Processing. Apr 21 11:54:36 ganymede /kernel: Waiting 15 seconds for SCSI devices to settle Apr 21 11:54:36 ganymede /kernel: sa0 at aha0 bus 0 target 4 lun 0 Apr 21 11:54:36 ganymede /kernel: sa0: <CONNER CTT8000-S 1.17> Removable Sequential Access SCSI-2 device Apr 21 11:54:36 ganymede /kernel: sa0: 5.000MB/s transfers (5.000MHz, offset 8) Apr 21 11:54:36 ganymede /kernel: changing root device to wd0s3a Apr 21 11:54:36 ganymede /kernel: cd0 at aha0 bus 0 target 3 lun 0 Apr 21 11:54:36 ganymede /kernel: cd0: <YAMAHA CRW6416S 1.0c> Removable CD-ROM SCSI-2 device Apr 21 11:54:36 ganymede /kernel: cd0: 10.000MB/s transfers (10.000MHz, offset 8) Apr 21 11:54:36 ganymede /kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed >How-To-Repeat: Boot off 4.0-RELEASE CD-ROM 1 >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004210220.TAA09945>