Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 10 Apr 2003 12:05:23 +0300
From:      Tom Alsberg <alsbergt@cs.huji.ac.il>
To:        FreeBSD Stable List <freebsd-stable@freebsd.org>
Subject:   Writing a DVD
Message-ID:  <20030410090523.GA42018@cs.huji.ac.il>

next in thread | raw e-mail | index | archive | help
Hi there.

I am unsuccessfully trying to write a data DVD on FreeBSD 4.8.

The writer is a Sony DVD RW DRU-500A on IDE.  I'm using the atapicam
driver.  The media is a Sony DVD+RW which arrived with the writer.

Both with cdrecord ProDVD (from the ports or otherwise) and dvdrtools
I get a general SCSI retryable error message, when trying to write a
data track or blank a DVD.

I have no problems writing CD-R's or CD-RW media.

Any idea what the problem might be?  How to work around it?

Following is the output of cdrecord-ProDVD.

  Thanks, any help appreciated,
  -- Tom

Cdrecord 2.0 (i386-unknown-freebsd4.8) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.7'
atapi: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-500A '
Revision       : '2.0c'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: Found DVD media but DVD-R/DVD-RW support code is missing.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 4194304 = 4096 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   449 MB        
Total size:      516 MB (51:10.41) = 230281 sectors
Lout start:      516 MB (51:12/31) = 230281 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
Starting to write CD/DVD at speed 18 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
cdrecord: Input/output error. read track info: scsi sendcmd: retryable error
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 2
cmd finished after 0.005s timeout 240s
Writing  time:    0.062s
Average write speed 999.0x.
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 30 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x10 (medium not formatted) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.010s timeout 480s
cmd finished after 0.010s timeout 480s
Fixating time:    0.013s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

-- 
  Tom Alsberg - hacker (being the best description fitting this space)
  Web page:	http://www.cs.huji.ac.il/~alsbergt/
DISCLAIMER:  The above message does not even necessarily represent what
my fingers have typed on the keyboard, save anything further.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030410090523.GA42018>