Date: Mon, 21 Apr 1997 01:30:48 +0200 From: Ollivier Robert <roberto@keltia.freenix.fr> To: "FreeBSD SCSI Users' list" <freebsd-scsi@FreeBSD.ORG> Subject: NCR-810a & old Micropolis MP1624 problems Message-ID: <19970421013048.25762@keltia.freenix.fr>
next in thread | raw e-mail | index | archive | help
Hi,
A friend and I upgraded a few days ago our 486 to brand new P/I P55T2P4 MB
+ P133 (overclocked at 2x 83 MHz, works great !) and ASUS SC-200 (the model
which supports Ultra).
We both have old Micropolis MP1624 drives (not really SCSI2 but CCS).
Mine is working perfectly whereas his make his NCR pukes with an error
message. Once the offending disk is turned off, the system boots w/o
problems.
I don't have the _exact_ message because the machine is too fast (and I
don't have access to it) but it is something like this
ncr0: phase change (6-7) 8@000959c resid=6
aborting jobs
error 90
and cycling with the same message a few times till it decides to refuse the
drive. The main problem is that all targets after this one won't be
recognized and the system won't boot.
BIG difference: he's using 2.1.6 (I run CURRENT). Are there signifiant
différences between the 2.1.* driver and the 2.2/3.0 one ? He can boot the
2.2.1 boot floppy w/o problem. Is 2.2.1 the only answer to his problem ?
My messages :
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Sat Apr 19 02:47:00 CEST 1997
roberto@keltia.freenix.fr:/src/src/sys/compile/NKELTIA
CPU: Pentium (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 63684608 (62192K bytes)
bdevsw_add_generic: adding D_DISK flag for device 15
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 3 on pci0:0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
vga0 <VGA-compatible display device> rev 1 int a irq 9 on pci0:10:0
ncr0 <ncr 53c810a scsi> rev 18 int a irq 12 on pci0:11:0
scbus0 at ncr0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <IBM DORS-32160 WA6A> type 0 fixed SCSI 2
sd0: Direct-Access
sd0: 10.0 MB/s (100 ns, offset 8)
2063MB (4226725 512 byte sectors)
scbus0 target 2 lun 0: phase change 2-3 10@00086bd8 resid=4.
sd2 at scbus0 target 2 lun 0
sd2: <CONNER CFP1080S 3939> type 0 fixed SCSI 2
sd2: Direct-Access
sd2: 10.0 MB/s (100 ns, offset 8)
1030MB (2110812 512 byte sectors)
st1 at scbus0 target 4 lun 0
st1: <TANDBERG TDC 3600 =08:> type 1 removable SCSI 2
st1: Sequential-Access density code 0x0, drive empty
st0 at scbus0 target 5 lun 0
st0: <HP HP35480A 1009> type 1 removable SCSI 2
st0: Sequential-Access
st0: 5.0 MB/s (200 ns, offset 8)
density code 0x13, drive empty
ncr1 <ncr 53c810a scsi> rev 18 int a irq 11 on pci0:12:0
scbus1 at ncr1 bus 0
sd11 at scbus1 target 1 lun 0
sd11: <MICROP 1624-07MZ1077801 HZ2P> type 0 fixed SCSI 2
sd11: Direct-Access
sd11: 10.0 MB/s (100 ns, offset 8)
642MB (1316751 512 byte sectors)
sd12 at scbus1 target 2 lun 0
sd12: <SEAGATE ST31200N 8158> type 0 fixed SCSI 2
sd12: Direct-Access
sd12: 10.0 MB/s (100 ns, offset 8)
1006MB (2061108 512 byte sectors)
cd1 at scbus1 target 6 lun 0
cd1: <MATSHITA CD-ROM CR-8004 1.1f> type 5 removable SCSI 2
cd1: CD-ROM
cd1: asynchronous.
cd1: M_REJECT sent for 1-3-1-76-8.
can't get the size
--
Ollivier ROBERT -=- FreeBSD: There are no limits -=- roberto@keltia.freenix.fr
FreeBSD keltia.freenix.fr 3.0-CURRENT #41: Sun Mar 23 23:01:22 CET 1997
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19970421013048.25762>