Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 2 Mar 2015 09:31:46 -0700
From:      "Kenneth D. Merry" <ken@FreeBSD.ORG>
To:        Dan Langille <dan@langille.org>
Cc:        current@freebsd.org, scsi@freebsd.org
Subject:   Re: sa(4) driver changes available for test
Message-ID:  <20150302163146.GA85515@mithlond.kdm.org>
In-Reply-To: <0F17CDDB-4CE9-4881-B948-6B9BEDEB6455@langille.org>
References:  <20150214003232.GA63990@mithlond.kdm.org> <7CA52DF3-E073-4F50-BE4E-01C51CCDF2C7@langille.org> <20150217183645.GA30947@mithlond.kdm.org> <303C48AC-0DA8-447C-8DE7-0A1DD5DD7351@langille.org> <20150302003150.GB71528@mithlond.kdm.org> <D1C8E304-6DE7-4A03-A350-64E097EC4804@langille.org> <20150302022957.GB73433@mithlond.kdm.org> <0F17CDDB-4CE9-4881-B948-6B9BEDEB6455@langille.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 02, 2015 at 11:09:57 -0500, Dan Langille wrote:
> 
> > On Mar 1, 2015, at 9:29 PM, Kenneth D. Merry <ken@FreeBSD.ORG> wrote:
> > 
> > On Sun, Mar 01, 2015 at 19:41:07 -0500, Dan Langille wrote:
> >> 
> >>> On Mar 1, 2015, at 7:31 PM, Kenneth D. Merry <ken@FreeBSD.ORG> wrote:
> >>> 
> >>> On Sun, Mar 01, 2015 at 19:15:05 -0500, Dan Langille wrote:
> >>>> 
> >>>>> On Feb 17, 2015, at 1:36 PM, Kenneth D. Merry <ken@freebsd.org> wrote:
> >>>>> 
> >>>>> On Sat, Feb 14, 2015 at 18:22:43 -0500, Dan Langille wrote:
> >>>>>> 
> >>>>>>> On Feb 13, 2015, at 7:32 PM, Kenneth D. Merry <ken@freebsd.org> wrote:
> >>>>>>> 
> >>>>>>> 
> >>>>>>> I have a fairly large set of changes to the sa(4) driver and mt(1) driver
> >>>>>>> that I'm planning to commit in the near future.
> >>>>>>> 
> >>>>>>> A description of the changes is here and below in this message.
> >>>>>>> 
> >>>>>>> If you have tape hardware and the inclination, I'd appreciate testing and
> >>>>>>> feedback.
> >>>>>> 
> >>>>>> I have a DLT 8000 and an SDLT 220.
> >>>>>> 
> >>>>>> I don't have anything running current, but I have a spare machine which I could use for testing.
> >>>>>> 
> >>>>>> Do you see any value is tests with that hardware? I'd be testing it via Bacula.
> >>>>>> 
> >>>>>> disclosure: I'm the sysutils/bacula-* maintainer and a Bacula committer.
> >>>>>> 
> >>>>> 
> >>>>> Actually, yes.  Bacula is a bit tricky to configure, so your trying it out
> >>>>> would be helpful if you have the time.
> >>>>> 
> >>>>> In looking at the manuals for both the SDLT 220 and the DLT 8000, they both
> >>>>> claim to support long position information for the SCSI READ POSITION
> >>>>> command.
> >>>>> 
> >>>>> You can see what I'm talking about by doing:
> >>>>> 
> >>>>> mt eod
> >>>>> mt status
> >>>>> 
> >>>>> On my DDS-4 tape drive, this shows:
> >>>>> 
> >>>>> # mt -f /dev/nsa3 status
> >>>>> Drive: sa3: <SEAGATE DAT    06240-XXX 8071> Serial Number: HJ00YWY
> >>>>> ---------------------------------
> >>>>> Mode      Density              Blocksize      bpi      Compression
> >>>>> Current:  0x26:DDS-4           1024 bytes     97000    enabled (DCLZ)
> >>>>> ---------------------------------
> >>>>> Current Driver State: at rest.
> >>>>> ---------------------------------
> >>>>> Partition:   0      Calc File Number:  -1     Calc Record Number: -1
> >>>>> Residual:    0  Reported File Number:  -1 Reported Record Number: -1
> >>>>> Flags: None
> >>>>> 
> >>>>> But on an LTO-5, which will give long position information, I get:
> >>>>> 
> >>>>> [root@doc ~]# mt status
> >>>>> Drive: sa0: <IBM ULTRIUM-HH5 E4J1>
> >>>>> ---------------------------------
> >>>>> Mode      Density              Blocksize      bpi      Compression
> >>>>> Current:  0x58:LTO-5           variable       384607   enabled (0x1)
> >>>>> ---------------------------------
> >>>>> Current Driver State: at rest.
> >>>>> ---------------------------------
> >>>>> Partition:   0      Calc File Number:   2     Calc Record Number: -1
> >>>>> Residual:    0  Reported File Number:   2 Reported Record Number: 32373
> >>>>> Flags: None
> >>>>> 
> >>>>> That, in combination with the changes I made to the position information
> >>>>> code in the driver, mean that even the old MTIOCGET ioctl should return an
> >>>>> accurate file number at end of data.  e.g., on the LTO-5:
> >>>>> 
> >>>>> [root@doc ~]# mt ostatus
> >>>>> Mode      Density              Blocksize      bpi      Compression
> >>>>> Current:  0x58:LTO-5           variable       384607   0x1
> >>>>> ---------available modes---------
> >>>>> 0:        0x58:LTO-5           variable       384607   0x1
> >>>>> 1:        0x58:LTO-5           variable       384607   0x1
> >>>>> 2:        0x58:LTO-5           variable       384607   0x1
> >>>>> 3:        0x58:LTO-5           variable       384607   0x1
> >>>>> ---------------------------------
> >>>>> Current Driver State: at rest.
> >>>>> ---------------------------------
> >>>>> File Number: 2  Record Number: -1       Residual Count -1
> >>>>> 
> >>>>> So the thing to try, in addition to just making sure that Bacula continues
> >>>>> to work properly, is to try setting this for the tape drive in
> >>>>> bacula-sd.conf:
> >>>>> 
> >>>>> Hardware End of Medium = yes
> >>>>> 
> >>>>> It looks like the Bacula tape program (btape) has a test mode, and it would
> >>>>> be good to run through the tests on one of the tape drives and see whether
> >>>>> they work, and whether the results are different before and after the
> >>>>> changes.  I'm not sure how to enable the test mode.
> >>>> 
> >>>> I have this in /usr/local/etc/bacula/bacula-sd.conf
> >>>> 
> >>>> Device {
> >>>> Name                    = DLT
> >>>> Description             = "QUANTUM DLT7000 1624"
> >>>> Media Type              = DLT
> >>>> Archive Device          = /dev/nsa1
> >>>> 
> >>>> Autochanger             = YES
> >>>> Drive Index             = 0
> >>>> 
> >>>> Offline On Unmount      = no
> >>>> Hardware End of Medium  = yes
> >>>> BSF at EOM              = yes
> >>>> Backward Space Record   = no
> >>>> Fast Forward Space File = no
> >>>> TWO EOF                 = yes
> >>>> }
> >>>> 
> >>>> FYI, http://www.freebsddiary.org/digital-tl891.php (from 2006) has a btape test on this same model.
> >>>> 
> >>>> Here's the test I ran tonight:
> >>>> 
> >>>> [root@cuppy:/usr/home/dan] # btape -c /usr/local/etc/bacula/bacula-sd.conf /dev/nsa1                                                                                                
> >>>> Tape block granularity is 1024 bytes.
> >>>> btape: butil.c:287-0 Using device: "/dev/nsa1" for writing.
> >>>> btape: btape.c:469-0 open device "DLT" (/dev/nsa1): OK
> >>>> *test
> >>>> 
> >>>> === Write, rewind, and re-read test ===
> >>>> 
> >>>> I'm going to write 10000 records and an EOF
> >>>> then write 10000 records and an EOF, then rewind,
> >>>> and re-read the data to verify that it is correct.
> >>>> 
> >>>> This is an *essential* feature ...
> >>>> 
> >>>> btape: btape.c:1152-0 Wrote 10000 blocks of 64412 bytes.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1168-0 Wrote 10000 blocks of 64412 bytes.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1210-0 Rewind OK.
> >>>> 10000 blocks re-read correctly.
> >>>> Got EOF on tape.
> >>>> 10000 blocks re-read correctly.
> >>>> === Test Succeeded. End Write, rewind, and re-read test ===
> >>>> 
> >>>> btape: btape.c:1277-0 Block position test
> >>>> btape: btape.c:1289-0 Rewind OK.
> >>>> Reposition to file:block 0:4
> >>>> Block 5 re-read correctly.
> >>>> Reposition to file:block 0:200
> >>>> Block 201 re-read correctly.
> >>>> Reposition to file:block 0:9999
> >>>> Block 10000 re-read correctly.
> >>>> Reposition to file:block 1:0
> >>>> Block 10001 re-read correctly.
> >>>> Reposition to file:block 1:600
> >>>> Block 10601 re-read correctly.
> >>>> Reposition to file:block 1:9999
> >>>> Block 20000 re-read correctly.
> >>>> === Test Succeeded. End Write, rewind, and re-read test ===
> >>>> 
> >>>> 
> >>>> 
> >>>> === Append files test ===
> >>>> 
> >>>> This test is essential to Bacula.
> >>>> 
> >>>> I'm going to write one record  in file 0,
> >>>>                  two records in file 1,
> >>>>            and three records in file 2
> >>>> 
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:469-0 open device "DLT" (/dev/nsa1): OK
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1420-0 Now moving to end of medium.
> >>> 
> >>> This is the critical piece.  The test moves the tape to the end of the
> >>> medium.  With hardware position information, you can tell what filemark
> >>> you're on.  Without it, you can't.
> >>> 
> >>>> btape: btape.c:622-0 tape_dev.c:345 ioctl MTIOCGET error on "DLT" (/dev/nsa1). ERR=No error: 0.
> >>>> We should be in file 3. I am at file 0. This is NOT correct!!!!
> >>>> 
> >>>> Append test failed. Attempting again.
> >>>> Setting "Hardware End of Medium = no
> >>>>   and "Fast Forward Space File = no
> >>>> and retrying append test.
> >>> 
> >>> This is not surprsing, given that the drive doesn't support long read
> >>> position data.  (It's a SCSI-2 device.)  So that means that Bacula will
> >>> need to do it manually.
> >> 
> >> Yes, I have nothing newer than SCSI-2.  Even my SDLT is SCSI-2 but that
> >> tape library is hooked up to a different computer and was doing backups today.
> > 
> > So, here is one thing that we can try to see whether these drives support
> > long position information, even though they only claim to be SCSI-2.  If
> > they do, we can potentially add a quirk (or autodetection) to enable it.
> > The code currently doesn't bother asking drives that claim to be SCSI-2
> > for long position information.  (Because that feature was added in the
> > SSC spec, which came after SCSI-2.)
> > 
> > Issue a READ POSITION with the short form specified:
> > 
> > camcontrol cmd sa1 -v -c "34 0 0 0 0 0 0 0 0 0" -i 20 - |hd
> > 
> > Issue a READ POSITION with the vendor-specific block numbers:
> > 
> > camcontrol cmd sa1 -v -c "34 1 0 0 0 0 0 0 0 0" -i 20 - |hd
> > 
> > Issue a READ POSITION with the long form data:
> > 
> > camcontrol cmd sa1 -v -c "34 6 0 0 0 0 0 0 0 0" -i 32 - |hd
> > 
> > If it supports the last one, then I can put a quirk (or autodetection) in
> > the driver and Bacula will get the hardware filemarks.  You should try this
> > on your SDLT as well.  It may well support it.
> 
> Sadly, no:
> 
> [root@cuppy:~] # camcontrol cmd sa1 -v -c "34 0 0 0 0 0 0 0 0 0" -i 20 - |hd
> 00000000  80 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 00000010  00 00 00 00                                       |....|
> 00000014
> [root@cuppy:~] # camcontrol cmd sa1 -v -c "34 1 0 0 0 0 0 0 0 0" -i 20 - |hd
> 00000000  80 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 00000010  00 00 00 00                                       |....|
> 00000014
> [root@cuppy:~] # camcontrol cmd sa1 -v -c "34 6 0 0 0 0 0 0 0 0" -i 32 - |hd
> camcontrol: error sending command
> (pass2:ahc0:0:2:0): READ POSITION. CDB: 34 06 00 00 00 00 00 00 00 00 
> (pass2:ahc0:0:2:0): CAM status: SCSI Status Error
> (pass2:ahc0:0:2:0): SCSI status: Check Condition
> (pass2:ahc0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
> (pass2:ahc0:0:2:0): Command byte 1 bit 2 is invalid
> [root@cuppy:~] # 

Okay.  Not too surprising I suppose.

> The SDLT server is on 9.3 though:
> 
> [root@knew:/usr/home/dan] # camcontrol cmd sa1 -v -c "34 0 0 0 0 0 0 0 0 0" -i 20 - |hd
> camcontrol: cam_lookup_pass: CAMGETPASSTHRU ioctl failed
> cam_lookup_pass: No such file or directory
> cam_lookup_pass: either the pass driver isn't in your kernel
> cam_lookup_pass: or sa1 doesn't exist
> [root@knew:/usr/home/dan] # uname -a
> FreeBSD knew.unixathome.org 9.3-RELEASE-p10 FreeBSD 9.3-RELEASE-p10 #0: Tue Feb 24 21:28:03 UTC 2015     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64
> [root@knew:/usr/home/dan] # 
> 
> 
> It took me a while to figure that out... there is no sa1 on *this* system.
> 
> But, my SDLT:
> 
> [root@knew:/usr/home/dan] # camcontrol cmd sa0 -v -c "34 0 0 0 0 0 0 0 0 0" -i 20 - |hd
> 00000000  80 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 00000010  00 00 00 00                                       |....|
> 00000014
> [root@knew:/usr/home/dan] # camcontrol cmd sa0 -v -c "34 1 0 0 0 0 0 0 0 0" -i 20 - |hd
> 00000000  80 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 00000010  00 00 00 00                                       |....|
> 00000014
> [root@knew:/usr/home/dan] # camcontrol cmd sa0 -v -c "34 6 0 0 0 0 0 0 0 0" -i 32 - |hd
> 00000000  80 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 00000020
> [root@knew:/usr/home/dan] # 

Just to confirm, can you send the output of:

camcontrol inquiry sa0 -v

I want to make certain it reports that it is SCSI-2.  If so, I'll change
the check in the driver to try asking for long position information on
SCSI-2 devices.  If it fails, it'll fall back to the regular method.

> > 
> > Google didn't quickly produce a SCSI manual for the DEC drive, but the
> > Quantum SDLT manual indicates that it supports long position data, despite
> > identifying itself as a SCSI-2 drive.
> > 
> >>> === Append files test ===
> >>>> 
> >>>> This test is essential to Bacula.
> >>>> 
> >>>> I'm going to write one record  in file 0,
> >>>>                  two records in file 1,
> >>>>            and three records in file 2
> >>>> 
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:469-0 open device "DLT" (/dev/nsa1): OK
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1420-0 Now moving to end of medium.
> >>>> btape: btape.c:625-0 Moved to end of medium.
> >>>> We should be in file 3. I am at file 3. This is correct!
> >>>> 
> >>>> Now the important part, I am going to attempt to append to the tape.
> >>>> 
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> Done appending, there should be no I/O errors
> >>>> 
> >>>> Doing Bacula scan of blocks:
> >>>> 1 block of 64448 bytes in file 1
> >>>> End of File mark.
> >>>> 2 blocks of 64448 bytes in file 2
> >>>> End of File mark.
> >>>> 3 blocks of 64448 bytes in file 3
> >>>> End of File mark.
> >>>> 1 block of 64448 bytes in file 4
> >>>> End of File mark.
> >>>> Total files=4, blocks=7, bytes = 451,136
> >>>> End scanning the tape.
> >>>> We should be in file 4. I am at file 4. This is correct!
> >>>> 
> >>>> 
> >>>> It looks like the test worked this time, please add:
> >>>> 
> >>>>   Hardware End of Medium = No
> >>>> 
> >>>>   Fast Forward Space File = No
> >>>> to your Device resource in the Storage conf file.
> >>>> 
> >>>> The above Bacula scan should have output identical to what follows.
> >>>> Please double check it ...
> >>>> === Sample correct output ===
> >>>> 1 block of 64448 bytes in file 1
> >>>> End of File mark.
> >>>> 2 blocks of 64448 bytes in file 2
> >>>> End of File mark.
> >>>> 3 blocks of 64448 bytes in file 3
> >>>> End of File mark.
> >>>> 1 block of 64448 bytes in file 4
> >>>> End of File mark.
> >>>> Total files=4, blocks=7, bytes = 451,136
> >>>> === End sample correct output ===
> >>>> 
> >>>> If the above scan output is not identical to the
> >>>> sample output, you MUST correct the problem
> >>>> or Bacula will not be able to write multiple Jobs to 
> >>>> the tape.
> >>>> 
> >>>> Skipping read backwards test because BSR turned off.
> >>>> 
> >>>> 
> >>>> === Forward space files test ===
> >>>> 
> >>>> This test is essential to Bacula.
> >>>> 
> >>>> I'm going to write five files then test forward spacing
> >>>> 
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1907-0 Wrote one record of 64412 bytes.
> >>>> btape: btape.c:1909-0 Wrote block to device.
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:604-0 Wrote 1 EOF to "DLT" (/dev/nsa1)
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1634-0 Now forward spacing 1 file.
> >>>> We should be in file 1. I am at file 1. This is correct!
> >>>> btape: btape.c:1646-0 Now forward spacing 2 files.
> >>>> We should be in file 3. I am at file 3. This is correct!
> >>>> btape: btape.c:574-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1659-0 Now forward spacing 4 files.
> >>>> We should be in file 4. I am at file 4. This is correct!
> >>>> 
> >>>> btape: btape.c:1677-0 Now forward spacing 1 more file.
> >>>> We should be in file 5. I am at file 5. This is correct!
> >>>> 
> >>>> === End Forward space files test ===
> >>>> 
> >>>> 
> >>>> Ah, I see you have an autochanger configured.
> >>>> To test the autochanger you must have a blank tape
> >>>> that I can write on in Slot 1.
> >>>> 
> >>>> Do you wish to continue with the Autochanger test? (y/n): y
> >>>> 
> >>>> 
> >>>> === Autochanger test ===
> >>>> 
> >>>> 3301 Issuing autochanger "loaded" command.
> >>>> Nothing loaded in the drive. OK.
> >>>> 3303 Issuing autochanger "load 1 0" command.
> >>>> 3303 Autochanger "load 1 0" status is OK.
> >>>> btape: btape.c:469-0 open device "DLT" (/dev/nsa1): OK
> >>>> btape: btape.c:1564-0 Rewound "DLT" (/dev/nsa1)
> >>>> btape: btape.c:1571-0 Wrote EOF to "DLT" (/dev/nsa1)
> >>>> 
> >>>> The test autochanger worked!!
> >>> 
> >>> Great, thanks for running the test!  Looks like things are working as well
> >>> as they were before.
> >>> 
> >>>>> 
> >>>>>> I'll let the other Bacula devs know about this.  They deal with the hardware.  I work on PostgreSQL.
> >>>>>> 
> >>>>> 
> >>>>> Thanks!  If there are additional features they would like out of the tape
> >>>>> driver, I'm happy to talk about it.  (Or help if they'd like to use the new
> >>>>> status reporting ioctl, MTIOCEXTGET or any of the other new ioctls.)
> >>>> 
> >>>> Errors are interesting to me.  Especially corrected errors. They are a good indicator of tape quality.
> >>>> 
> >>> 
> >>> Yes.  At least on modern drives, there is a good bit available in the log
> >>> pages.  You can try seeing what logs your drive supports by installing the
> >>> sg3_utils package and running 'sg_logs sa1 --all'.
> >>> 
> >>> Given the large amount of data available on some drives, and the difficulty
> >>> distilling it down to a clear good/bad, I probably won't stick that in the
> >>> 'mt status' output.
> >>> 
> >>> But you can certainly take a look at it and have an idea of whether your
> >>> particular tape/drive are experiencing issues.
> >> 
> >> That's a lot of output: https://gist.github.com/dlangille/0e15a7fbf7acab56fd32
> > 
> > That is a lot.
> > 
> >> I will run some Bacula jobs soon.  I'm still setting up config files.
> > 
> > Thanks for all the testing, I really appreciate it!
> > 
> > Ken
> > -- 
> > Kenneth Merry
> > ken@FreeBSD.ORG
> 
> ? 
> Dan Langille
> http://langille.org/
> 
> 
> 
> 
> 

Ken
-- 
Kenneth Merry
ken@FreeBSD.ORG



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150302163146.GA85515>