Date: Wed, 24 Nov 1999 17:01:18 +0000 (GMT) From: Paul Thornton <prt@prt.org> To: mobile@freebsd.org Subject: Problems with 3.3 on Vaio PCG-X9 Message-ID: <Pine.BSF.4.10.9911241645130.50547-100000@avalon.whirlygig.co.uk>
next in thread | raw e-mail | index | archive | help
Hi,
I have been playing with 3.3 release on a new Sony PCG-X9 (which is a truly
lovely machine - makes my "old" F190 look like an antique!). I so far have
two things that don't appear to work properly (I'm sure there will be more):
I'm using PAO3-19991011, with PAO3 boot floppies to do the install.
The docking station that comes with it has, amongst other things, a PCMCIA
slot, which is spotted during the PCI probe, but I can't see where in the
machine it lives. Windows claims that it is on irq 9 and memory range
8002000-8002fff (and also claims that the main internal controller is also at
a similarly high address) so I'm not sure how to make that work. When I
installed, I used the Default option for where the controller was.
I've also been playing with USB mice - and have got that working without too
much pain; but the buttons don't work at all :( Is this a known problem with
the usb code or have I missed something really obvious?
On a positive side, the install went fine, I have 3 partitions on the disc
(FAT32 primary, FreeBSD, Extended) and my Linksys 10/100 card works fine in
an internal slot. X is up and working (I have a pretty basic XF86config for
this machine if anyone is interested, but the chipset is the same as the F
series so I guess most people have that now!). I haven't played with apm
yet, but will let people know if there are any issues there.
Any help would be greatly appreciated.
dmesg output below.
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.3-RELEASE #2: Wed Nov 24 16:13:48 GMT 1999
root@emma.prt.org:/usr/src/sys/compile/SONY-X9
Timecounter "i8254" frequency 1193182 Hz
CPU: Unknown 80686 (496.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,<b25>>
real memory = 134217728 (131072K bytes)
avail memory = 127066112 (124088K bytes)
Preloaded elf kernel "kernel" at 0xc035a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035a09c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
uhci0: <Intel 82371AB/EB USB Host Controller> rev 0x01 int d irq 9 on pci0.7.2
usb0: USB version 1.0, interrupting at 9
chip3: <Intel 82371AB Power management controller> rev 0x03 on pci0.7.3
pcic0: <Ricoh RL5C478 PCI-CardBus Brige> rev 0x80 int a irq 255 on pci0.12.0
RL5C4XX PCI Config Reg:
pcic1: <Ricoh RL5C478 PCI-CardBus Brige> rev 0x80 int b irq 255 on pci0.12.1
RL5C4XX PCI Config Reg:
pcic2: <Ricoh RL5C475 PCI-CardBus Brige> rev 0x80 int a irq 255 on pci0.16.0
RL5C4XX PCI Config Reg: [CSC isa irq]
Probing for devices on PCI bus 1:
vga0: <NeoMagic model 0005 VGA-compatible display device> rev 0x20 int a irq 9 on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DARA-218000>
wd0: 17301MB (35433216 sectors), 35152 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA DVD-ROM SD-C2202/1021>, removable, accel, dma, iordis
acd0: drive speed 4134KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
pcic0 at 0x3e0-0x3e1 irq 11 on isa
PC-Card ctlr(0) Ricoh RL5C478 [CardBus bridge mode] (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
pcic0: slot 1 controller I/O address 0x3e0
pcic1 not found at 0x3e4
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
usbd_match
usb0: <Intel 82371AB/EB USB Host Controller>
usbd_attach
usbd_new_device bus=0xc0975000 depth=0 lowspeed=0
usbd_new_device: adding unit addr=1, rev=100, class=9, subclass=0, protocol=0, maxpacket=64, ls=0
usbd_new_device: new dev (addr 1), dev=0xc0983f80, parent=0xc0971640
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
usbd_set_config_index: (addr 1) attr=0x40, selfpowered=1, power=0, powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
uhub0: 2 ports with 2 removable, self powered
usbd_new_device bus=0xc0975000 depth=1 lowspeed=512
usbd_new_device: adding unit addr=2, rev=100, class=0, subclass=0, protocol=0, maxpacket=8, ls=1
usbd_new_device: new dev (addr 2), dev=0xc0983c80, parent=0xc0970e20
usbd_probe_and_attach: no device specific driver found
usbd_set_config_index: (addr 2) attr=0xa0, selfpowered=0, power=100, powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
ums0
ums0: Microsoft IntelliMouse, rev 1.00/1.05, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Initializing PC-card drivers: ed wlp joy sio wdc
changing root device to wd0s2a
Card inserted, slot 1
card1: assign ed0 iobase 0x300 irq 3
ed0: address 00:e0:98:05:ab:36, type Linksys (16 bit)
--
Paul
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9911241645130.50547-100000>