Date: Wed, 29 Sep 2004 06:47:34 GMT From: "Mateusz Jędrasik" <imachine@toya.net.pl> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/72163: ACPI Panics on boot with 5.3-BETA-3 and up on Abit BH-6 board Message-ID: <200409290647.i8T6lYtb058876@www.freebsd.org> Resent-Message-ID: <200409290650.i8T6oSrp009839@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72163
>Category: kern
>Synopsis: ACPI Panics on boot with 5.3-BETA-3 and up on Abit BH-6 board
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Sep 29 06:50:28 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Mateusz Jędrasik
>Release: 5.3-BETA5
>Organization:
>Environment:
FreeBSD creative.toya.net.pl 5.3-BETA5 FreeBSD 5.3-BETA5 #0: Wed Sep 22 16:58:13 CEST 2004 imachine@creative.toya.net.pl:/usr/obj/usr/src/sys/CREATIVE i386
>Description:
Since BETA-3 update enabling ACPI crashes my machine on boot. The effect is:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x24
fault code = supervisor read, page not present
instruction provider = 0x8:0xc04e35d6
stack pointer = 0x10:0xc0c2198c
frame pointer = 0x10:0xc0c2198c
code segment = base 0x0, limit 0xfffff, type 0x1b /or 0x16/
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL:0
current process = 0 (swapper)
trap number = 12
panic: page fault
i attach my dmesg without acpi on beta5 /its broken since beta3, i
unfrotunately have no longer sources for beta2 so cannot reproduce any
messages/, and also i attach some info here from the dmesg with acpi
enabled on beta5 - mainly the acpi0 info from it.
it reads:
acpi0: <ABIT AWRDACPI>
acpi0: reservation at f00000, 40000 (3) failed
acpi0: reservation at f00000, 7ef0000 (3) failed
and here's the dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA5 #0: Wed Sep 22 16:58:13 CEST 2004
imachine@creative.toya.net.pl:/usr/obj/usr/src/sys/CREATIVE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (721.64-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 134152192 (127 MB)
avail memory = 125812736 (119 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
smbios0: <System Management BIOS> at iomem 0xf5ae0-0xf5afe on motherboard
smbios0: Version: 2.03, Revision: 0.08
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: ROUTE_INTERRUPT failed.
drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem 0xe1000000-0xe100ffff,0xd8000000-0xdfffffff irq 5 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 128MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 4000
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xd400-0xd4ff mem 0xe3140000-0xe3140fff irq 14 at device 9.0 on pci0
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xe3000000-0xe30fffff,0xe3141000-0xe3141fff irq 10 at device 11.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:d5:a5:87
pci0: <multimedia, audio> at device 13.0 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd57ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
ahc1: No resources allocated.
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 721638033 Hz quality 800
Timecounters tick every 1.000 msec
ATAPI_RESET time = 850us
Waiting 2 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HITACHI CDR-8130 0021> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/da0s1a
cheers.
>How-To-Repeat:
Boot up with acpi enabled on anything higher than BETA-3 with my ABIT-BH6 motherboard. /could be an issue regarding ahc controller and my bios acting up. i havent played with it too much - the settings worked 'as they were' when i updated from BETA-2/
>Fix:
Unfortunately not known to me.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409290647.i8T6lYtb058876>