Date: Sat, 28 Mar 1998 02:57:46 -0800 (PST) From: Dmitry Kohmanyuk <dk@dog.farm.org> To: ulf@Alameda.net (Ulf Zimmermann) Cc: freebsd-hackers@FreeBSD.ORG Subject: Re: multi-port ethernet cards Message-ID: <199803281057.CAA00434@dog.farm.org>
next in thread | raw e-mail | index | archive | help
In article <199803231942.LAA21699@Gatekeeper.Alameda.net> you wrote: > > Does anyone know of any multi-port ethernet (10baseT) cards that > > are supported? > > Or that might easily become supported? > > > http://www.zynx.com/ correction here - www.znyx.com ... > I have the ZX-314 and works great with FreeBSD (4 port card). Adaptec/Cogent > makes one too, which is supported as far I know. I use ZX314 too, and it works great. This is the same card used in NetApp NFS servers btw. Here is a dmesg: Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2-STABLE #0: Thu Sep 18 18:19:29 PDT 1997 CPU: Pentium (90.00-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 67108864 (65536K bytes) avail memory = 62492672 (61028K bytes) DEVFS: ready for devices Probing for devices on PCI bus 0: chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0 chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0 chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1 chip3 <generic PCI bridge (vendor=1011 device=0021 subclass=4)> rev 1 on pci0:17 vga0 <VGA-compatible display device> rev 83 int a irq 15 on pci0:18 bt0 <Buslogic 946 SCSI host adapter> rev 0 int a irq 5 on pci0:19 bt0: Bt946C/ 0-(32bit) bus bt0: reading board settings, busmastering, int=11 bt0: version 4.25J, fast sync, parity, 32 mbxs, 32 ccbs bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15 bt0: Using Strict Round robin scheme bt0 waiting for scsi devices to settle (bt0:0:0): "MICROP 4110-09NB_Nov18F TN0F" type 0 fixed SCSI 2 sd0(bt0:0:0): Direct-Access 1002MB (2053880 512 byte sectors) sd0(bt0:0:0): with 2428 cyls, 9 heads, and an average 93 sectors/track de0 <Digital 21140A Fast Ethernet> rev 32 int a irq 10 on pci0:20 de0: DE500-AA 21140A [10-100Mb/s] pass 2.0 de0: address 00:00:f8:03:a4:8f Probing for devices on PCI bus 1: de1 <Digital 21040 Ethernet> rev 36 int a irq 11 on pci1:4 de1: ZNYX ZX314 21040 [10Mb/s] pass 2.4 de1: address 00:c0:95:f0:3f:38 de1: enabling 10baseT port de2 <Digital 21040 Ethernet> rev 36 int a irq 10 on pci1:5 de2: (null)21040 [10Mb/s] pass 2.4 de2: address 00:c0:95:f0:3f:39 de2: enabling 10baseT port de3 <Digital 21040 Ethernet> rev 36 int a irq 5 on pci1:6 de3: (null)21040 [10Mb/s] pass 2.4 de3: address 00:c0:95:f0:3f:3a de3: enabling 10baseT port de4 <Digital 21040 Ethernet> rev 36 int a irq 15 on pci1:7 de4: (null)21040 [10Mb/s] pass 2.4 de4: address 00:c0:95:f0:3f:3b de4: enabling 10baseT port Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 not found at 0x60 cy0 irq 9 maddr 0xd4000 msize 8192 on isa fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in bt: unit number (1) too high bt1 not found at 0x330 npx0 on motherboard npx0: INT 16 interface DEVFS: ready to run IP packet filtering initialized, divert enabled, logging disabled To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199803281057.CAA00434>