Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 1 Aug 2003 17:15:23 +0200
From:      Kirill Ponomarew <ponomarew@oberon.net>
To:        freebsd-stable@freebsd.org
Subject:   gdb coredumps
Message-ID:  <20030801151523.GA44595@krion>

next in thread | raw e-mail | index | archive | help

--DKU6Jbt7q3WqK7+M
Content-Type: multipart/mixed; boundary="Nq2Wo0NMKNjxTN9z"
Content-Disposition: inline


--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Hi,

After kernel panic I couldn't get gdb work properly.

msi$ uname -sr
FreeBSD 4.7-RELEASE

msi$ gdb -k /usr/src/sys/compile/MSINW/kernel.debug vmcore.0=20
GNU gdb 4.18 (FreeBSD)
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public
License, and you are welcome to change it and/or distribute copies of it un=
der
certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-unknown-freebsd"...Deprecated
bfd_read called at /usr/src/gnu/usr.bin/binutil
s/gdb/../../../../contrib/gdb/gdb/dbxread.c line 2627 in elfstab_build_psym=
tabs
Deprecated bfd_read called at /usr/src/gnu/usr.bin/binutils/gdb/../../../..=
/contrib/gdb/gdb/dbxread.c
line 933
 in fill_symbuf

IdlePTD at phsyical address 0x65746e49
initial pcb at physical address 0x002cff20
panic messages:
---
dmesg: cannot read PTD
---
#0  0x0 in ?? ()
(kgdb) where
#0  0x0 in ?? ()
Segmentation fault (core dumped)

-Kirill

--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Content-Transfer-Encoding: quoted-printable

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Thu Mar  6 12:27:11 CET 2003
    root@serv.msi-europe.jis.de:/usr/obj/usr/src/sys/MSINW
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(TM) XP 2400+ (2000.08-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x681  Stepping =3D 1
  Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=3D0xc0400000<AMIE,DSP,3DNow!>
real memory  =3D 1073725440 (1048560K bytes)
avail memory =3D 1041793024 (1017376K bytes)
Preloaded elf kernel "kernel" at 0xc034a000.
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00f1bf0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=3D1106 device=3Db099)> at device 1.0 on p=
ci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5446 graphics accelerator> at 0.0 irq 11
pci0: <unknown card> (vendor=3D0x14e4, dev=3D0x4401) at 9.0 irq 12
twe0: <3ware Storage Controller> port 0xb800-0xb80f mem 0xf1800000-0xf1ffff=
ff,0xf2000000-0xf200000f irq 15 at device 11.0 on pci0
twe0: 8 ports, Firmware FE7X 1.05.00.036, BIOS BE7X 1.08.00.044
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb43f mem 0xf0800000-0=
xf08fffff,0xf1000000-0xf1000fff irq 11 at device 13.0 on pci0
fxp0: Ethernet address 00:02:b3:4c:0b:66
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xb000-0xb03f mem 0xef800000-0=
xef81ffff,0xf0000000-0xf0000fff irq 10 at device 14.0 on pci0
fxp1: Ethernet address 00:02:b3:4c:32:12
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xa800-0xa8ff mem 0xef000=
000-0xef000fff irq 12 at device 15.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 14 at device 16.0=
 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 14 at device 16.1=
 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x9800-0x981f irq 14 at device 16.2=
 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 16.3 irq 14
isab0: <PCI to ISA bridge (vendor=3D1106 device=3D3177)> at device 17.0 on =
pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> at device 17.1 on pci0
atapci0: ATA channel disabled by BIOS
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff,0xd4000-0xd4ff=
f on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5Si> PJL,MLC,PCL
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
ncp_load: [210-213]
Waiting 3 seconds for SCSI devices to settle
twed0: <TwinStor, Normal> on twe0
twed0: 117799MB (241252672 sectors)
twed1: <RAID5, Normal> on twe0
twed1: 235598MB (482505216 sectors)
twe0: command interrupt
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <SONY SDX-500C 010c> Removable Sequential Access SCSI-2 device=20
sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
Mounting root from ufs:/dev/twed0s1a
WARNING: / was not properly dismounted

--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=MSINW
Content-Transfer-Encoding: quoted-printable

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.43 2002/05/23 17:04:01 obri=
en Exp $

machine		i386
#cpu		I386_CPU
#cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident	 	MSINW=09
maxusers	0

makeoptions	DEBUG=3D-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
#options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
#options 	NFS			#Network Filesystem
#options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options		NWFS			#Netware Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=3D3000		#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options	 	DDB
options 	DDB_UNATTENDED
options         SHMALL=3D16384
options         SHMMAX=3D"(SHMMAXPGS*PAGE_SIZE+1)"
options         SHMMAXPGS=3D8192
options         SHMMIN=3D128
options         SHMMNI=3D128
options         SHMSEG=3D96
=09

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device		fdc0

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
#device		amd		# AMD 53C974 (Tekram DC-390(T))
#device		isp		# Qlogic family
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets)
#options		SYM_SETUP_LP_PROBE_MAP=3D0x40
				# Allow ncr to attach legacy NCR devices when=20
				# both sym and ncr are configured

#device		adv0	at isa?
#device		adw
#device		bt0	at isa?
#device		aha0	at isa?
device		aic0	at isa?

#device		ncv		# NCR 53C500
#device		nsp		# Workbit Ninja SCSI-3
#device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
#device		dpt		# DPT Smartcache - See LINT for options!
#device          iir             # Intel Integrated RAID
#device		mly		# Mylex AcceleRAID/eXtremeRAID
#device		ciss		# Compaq SmartRAID 5* series

# RAID controllers
#device		aac		# Adaptec FSA RAID, Dell PERC2/PERC3
#device		aacp		# SCSI passthrough for aac (requires CAM)
#device		ida		# Compaq Smart RAID
#device		amr		# AMI MegaRAID
#device		mlx		# Mylex DAC960 family
device		twe		# 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT li=
nes
#options 	PCVT_SCANSET=3D2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device		card
#device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000
#device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
#device		sio2	at isa? disable port IO_COM3 irq 5
#device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
#device		txp		# 3Com 3cR990 (``Typhoon'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
#device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		pcn		# AMD Am79C97x PCI 10/100 NICs
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		tx		# SMC EtherPower II (83c170 ``EPIC'')
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device		bge		# Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
#device		ex
#device		ep
#device		fe0	at isa? port 0x300
# Xircom Ethernet
#device		xe
# PRISM I IEEE 802.11b wireless NIC.
#device		awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
#device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
#device		an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 irq 10 drq 0
#device		cs0	at isa? port 0x300
#device		sn0	at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
#pseudo-device	sl	1	# Kernel SLIP
#pseudo-device	ppp	1	# Kernel PPP
#pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
#pseudo-device	md		# Memory "disks"
#pseudo-device	gif		# IPv6 and IPv4 tunneling
#pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# Novell
pseudo-device   ef
options         IPX
options         NCP
options         ETHER_II                # enable Ethernet_II frame
options         ETHER_8023              # enable Ethernet_802.3 (Novell) fr=
ame
options         ETHER_8022              # enable Ethernet_802.2 frame
options         ETHER_SNAP              # enable Ethernet_802.2/SNAP frame


# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		uscanner	# Scanners
device		urio		# Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet

--Nq2Wo0NMKNjxTN9z--

--DKU6Jbt7q3WqK7+M
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (FreeBSD)

iD8DBQE/KoQKQC1G6a60JuURAkKPAKDs+5Fb8u4cwhOOULzi56KjS+3EzgCg4kL4
yo5qmqvUzis7gLx2vag1T98=
=BWCQ
-----END PGP SIGNATURE-----

--DKU6Jbt7q3WqK7+M--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030801151523.GA44595>