Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 30 May 1999 13:48:52 -0700
From:      "William Woods" <wwoods@cybcon.com>
To:        "Freebsd Mobile" <freebsd-mobile@freebsd.org>
Subject:   Getting this card to work........
Message-ID:  <000001beaadd$d388ba00$264b93cd@william>

Next in thread | Raw E-Mail | Index | Archive | Help
Ok, I have this el cheaps pcmcia cdrom that a friend gave me for my laptop.
I know it works undrer Windows and would like to get it to work under
FreeBSD. Here is a copy of dumpcis for it. I have no idea how to configure
pccard.conf in the /etc/ directory, so if somebody could help I would
appreciate it.

dumpcis follows

May 30 13:33:34 mobile /kernel: Card inserted, slot 1
May 30 13:33:40 mobile pccardd[71]: No card in database for
"Shining"("PMIDE-ASC")

------------------------------------------------------------
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
    000:  d1 00 ff
	Common memory device information:
		Device number 1, type Function specific, WPS = OFF
		Speed = 250nS, Memory block size = 512b, 1 units
Tuple #2, code = 0x1a (Configuration map), length = 5
    000:  01 03 00 04 0f
	Reg len = 2, config register addr = 0x400, last config = 0x3
	Registers: XXXX----
Tuple #3, code = 0x15 (Version 1 info), length = 30
    000:  04 01 53 68 69 6e 69 6e 67 00 50 4d 49 44 45 2d
    010:  41 53 43 00 52 65 76 20 31 2e 30 34 00 ff
	Version = 4.1, Manuf = [Shining],card vers = [PMIDE-ASC]
	Addit. info = [Rev 1.04],[]
Tuple #4, code = 0x1b (Configuration entry), length = 7
    000:  c1 41 18 44 30 00 04
	Config index = 0x1(default)
	Interface byte = 0x41 (I/O)  +RDY/-BSY active
	Card decodes 4 address lines, limited 8/16 Bit I/O
		IRQ modes:  Pulse
		IRQ level = 4
Tuple #5, code = 0x1b (Configuration entry), length = 14
    000:  82 41 18 ca 61 60 01 07 6e 01 01 30 00 08
	Config index = 0x2
	Interface byte = 0x41 (I/O)  +RDY/-BSY active
	Card decodes 10 address lines, limited 8/16 Bit I/O
		I/O address # 1: block start = 0x160 block length = 0x8
		I/O address # 2: block start = 0x16e block length = 0x2
		IRQ modes: Level
		IRQs:  4 5
Tuple #6, code = 0x1b (Configuration entry), length = 14
    000:  83 41 18 ca 61 50 01 07 5e 01 01 30 00 02
	Config index = 0x3
	Interface byte = 0x41 (I/O)  +RDY/-BSY active
	Card decodes 10 address lines, limited 8/16 Bit I/O
		I/O address # 1: block start = 0x150 block length = 0x8
		I/O address # 2: block start = 0x15e block length = 0x2
		IRQ modes: Level
		IRQs:  4 5
Tuple #7, code = 0x21 (Functional ID), length = 2
    000:  04 00
	Fixed disk card
Tuple #8, code = 0x22 (Functional EXT), length = 2
    000:  01 01
	Modem interface capabilities:
Tuple #9, code = 0x22 (Functional EXT), length = 3
    000:  02 00 57
	Data modem services available:
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0xff (Terminator), length = 0
2 slots found
----------------------------------------------------------------------

Appreciate any help,

William



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000001beaadd$d388ba00$264b93cd>