Date: Sun, 30 May 1999 13:48:52 -0700 From: "William Woods" <wwoods@cybcon.com> To: "Freebsd Mobile" <freebsd-mobile@freebsd.org> Subject: Getting this card to work........ Message-ID: <000001beaadd$d388ba00$264b93cd@william>
next in thread | raw e-mail | index | archive | help
Ok, I have this el cheaps pcmcia cdrom that a friend gave me for my laptop.
I know it works undrer Windows and would like to get it to work under
FreeBSD. Here is a copy of dumpcis for it. I have no idea how to configure
pccard.conf in the /etc/ directory, so if somebody could help I would
appreciate it.
dumpcis follows
May 30 13:33:34 mobile /kernel: Card inserted, slot 1
May 30 13:33:40 mobile pccardd[71]: No card in database for
"Shining"("PMIDE-ASC")
------------------------------------------------------------
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: d1 00 ff
Common memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 250nS, Memory block size = 512b, 1 units
Tuple #2, code = 0x1a (Configuration map), length = 5
000: 01 03 00 04 0f
Reg len = 2, config register addr = 0x400, last config = 0x3
Registers: XXXX----
Tuple #3, code = 0x15 (Version 1 info), length = 30
000: 04 01 53 68 69 6e 69 6e 67 00 50 4d 49 44 45 2d
010: 41 53 43 00 52 65 76 20 31 2e 30 34 00 ff
Version = 4.1, Manuf = [Shining],card vers = [PMIDE-ASC]
Addit. info = [Rev 1.04],[ÿ]
Tuple #4, code = 0x1b (Configuration entry), length = 7
000: c1 41 18 44 30 00 04
Config index = 0x1(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Card decodes 4 address lines, limited 8/16 Bit I/O
IRQ modes: Pulse
IRQ level = 4
Tuple #5, code = 0x1b (Configuration entry), length = 14
000: 82 41 18 ca 61 60 01 07 6e 01 01 30 00 08
Config index = 0x2
Interface byte = 0x41 (I/O) +RDY/-BSY active
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x160 block length = 0x8
I/O address # 2: block start = 0x16e block length = 0x2
IRQ modes: Level
IRQs: 4 5
Tuple #6, code = 0x1b (Configuration entry), length = 14
000: 83 41 18 ca 61 50 01 07 5e 01 01 30 00 02
Config index = 0x3
Interface byte = 0x41 (I/O) +RDY/-BSY active
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x150 block length = 0x8
I/O address # 2: block start = 0x15e block length = 0x2
IRQ modes: Level
IRQs: 4 5
Tuple #7, code = 0x21 (Functional ID), length = 2
000: 04 00
Fixed disk card
Tuple #8, code = 0x22 (Functional EXT), length = 2
000: 01 01
Modem interface capabilities:
Tuple #9, code = 0x22 (Functional EXT), length = 3
000: 02 00 57
Data modem services available:
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0xff (Terminator), length = 0
2 slots found
----------------------------------------------------------------------
Appreciate any help,
William
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001beaadd$d388ba00$264b93cd>