Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 25 Nov 2012 11:07:47 GMT
From:      Anton Shterenlikht <mexas@bristol.ac.uk>
To:        illoai@gmail.com, mexas@bristol.ac.uk
Cc:        freebsd-questions@freebsd.org
Subject:   Re: do I need agp(4) on my amd64 laptop
Message-ID:  <201211251107.qAPB7lIS031064@mech-cluster241.men.bris.ac.uk>
In-Reply-To: <CAHHBGkpRBoMuaQC_SnJdKZ5if3nE=aheuxJg49HO2eE9dz6NwQ@mail.gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
	From illoai@gmail.com Sat Nov 24 16:09:29 2012

	On 22 November 2012 06:19, Anton Shterenlikht <mexas@bristol.ac.uk> wrote:
	> It is not clear for me from the agp(4) man page,
	> whether I need this device in the kernel or not.
	> The pciconf -lv output is below. Or do I need to
	> show dmesg?
	>
	> Please advise
	>
	> Thanks
	> Anton
	>
	>
	> hostb0@pci0:0:0:0:      class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'RS690 Host Bridge'
	>     class      = bridge
	>     subclass   = HOST-PCI
	> pcib1@pci0:0:1:0:       class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 hdr=0x01
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'RS690 PCI to PCI Bridge (Internal gfx)'
	>     class      = bridge
	>     subclass   = PCI-PCI
	> pcib2@pci0:0:4:0:       class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 hdr=0x01
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     class      = bridge
	>     subclass   = PCI-PCI
	> pcib3@pci0:0:5:0:       class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 hdr=0x01
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'RS690 PCI to PCI Bridge (PCI Express Port 1)'
	>     class      = bridge
	>     subclass   = PCI-PCI
	> pcib4@pci0:0:6:0:       class=0x060400 card=0x30c2103c chip=0x79161002 rev=0x00 hdr=0x01
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'RS690 PCI to PCI Bridge (PCI Express Port 2)'
	>     class      = bridge
	>     subclass   = PCI-PCI
	> ahci0@pci0:0:18:0:      class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 Non-Raid-5 SATA'
	>     class      = mass storage
	>     subclass   = ATA
	> ohci0@pci0:0:19:0:      class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 USB (OHCI0)'
	>     class      = serial bus
	>     subclass   = USB
	> ohci1@pci0:0:19:1:      class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 USB (OHCI1)'
	>     class      = serial bus
	>     subclass   = USB
	> ohci2@pci0:0:19:2:      class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 USB (OHCI2)'
	>     class      = serial bus
	>     subclass   = USB
	> ohci3@pci0:0:19:3:      class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 USB (OHCI3)'
	>     class      = serial bus
	>     subclass   = USB
	> ohci4@pci0:0:19:4:      class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 USB (OHCI4)'
	>     class      = serial bus
	>     subclass   = USB
	> ehci0@pci0:0:19:5:      class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 USB Controller (EHCI)'
	>     class      = serial bus
	>     subclass   = USB
	> none0@pci0:0:20:0:      class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SBx00 SMBus Controller'
	>     class      = serial bus
	>     subclass   = SMBus
	> atapci0@pci0:0:20:1:    class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 IDE'
	>     class      = mass storage
	>     subclass   = ATA
	> hdac0@pci0:0:20:2:      class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SBx00 Azalia (Intel HDA)'
	>     class      = multimedia
	>     subclass   = HDA
	> isab0@pci0:0:20:3:      class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SB600 PCI to LPC Bridge'
	>     class      = bridge
	>     subclass   = PCI-ISA
	> pcib5@pci0:0:20:4:      class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'SBx00 PCI to PCI Bridge'
	>     class      = bridge
	>     subclass   = PCI-PCI
	> hostb1@pci0:0:24:0:     class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD]'
	>     device     = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
	>     class      = bridge
	>     subclass   = HOST-PCI
	> hostb2@pci0:0:24:1:     class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD]'
	>     device     = 'K8 [Athlon64/Opteron] Address Map'
	>     class      = bridge
	>     subclass   = HOST-PCI
	> hostb3@pci0:0:24:2:     class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD]'
	>     device     = 'K8 [Athlon64/Opteron] DRAM Controller'
	>     class      = bridge
	>     subclass   = HOST-PCI
	> hostb4@pci0:0:24:3:     class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD]'
	>     device     = 'K8 [Athlon64/Opteron] Miscellaneous Control'
	>     class      = bridge
	>     subclass   = HOST-PCI
	> vgapci0@pci0:1:5:0:     class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00
	>     vendor     = 'Advanced Micro Devices [AMD] nee ATI'
	>     device     = 'RS690M [Radeon X1200 Series]'
	>     class      = display
	>     subclass   = VGA
	> bge0@pci0:16:0:0:       class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 hdr=0x00
	>     vendor     = 'Broadcom Corporation'
	>     device     = 'NetLink BCM5906M Fast Ethernet PCI Express'
	>     class      = network
	>     subclass   = ethernet
	> siba_bwn0@pci0:48:0:0:  class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 hdr=0x00
	>     vendor     = 'Broadcom Corporation'
	>     device     = 'BCM4311 802.11a/b/g'
	>     class      = network
	> cbb0@pci0:2:4:0:        class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 hdr=0x02
	>     vendor     = 'Ricoh Co Ltd'
	>     device     = 'RL5c476 II'
	>     class      = bridge
	>     subclass   = PCI-CardBus

	You bring up a good point.  Your laptop is almost the same as mine,
	& the graphics chip is connected via PCI Express.
	I should see if it builds & runs without agp.

Mine is HP Compaq 6715s.
As far as I can see building a kernel with agp(4)
doesn't make it appear in dmesg, which to me indicates
I don't need it. But I'm not sure...
I'm having wierd problems with X and I'm trying
to understand better what's going on.

Anton



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?201211251107.qAPB7lIS031064>