Date: Thu, 14 Feb 2013 06:33:31 -0600 (CST) From: Scott Bennett <bennett@cs.niu.edu> To: joar.jegleim@gmail.com Cc: freebsd-questions@freebsd.org Subject: Re: 3 TB disk troubles Message-ID: <201302141233.r1ECXVXx020101@mp.cs.niu.edu>
next in thread | raw e-mail | index | archive | help
On Thu, 14 Feb 2013 13:21:38 +0100 Joar Jegleim <joar.jegleim@gmail.com>
wrote:
>I could be completely off mark here, but does that external drive have
>eSata too ?
No, it only has Firewire 400 and USB 2.0 sockets.
>Your problem resembles a lot something I struggled with a while ago.
>I'd bought an external hd case + a 3TB drive for my girlfriend , the
>external hd case supported eSATA and usb .
>
>I had a lot of problems when connecting that 3TB drive to my laptop
>via usb (I didn't have eSATA), the drive showed up as only 2TB .
>It turned out that the external drive case required to be connected
>via eSATA for +2TB drives, the manual said so, I had only forgotten
>about that .
Unfortunately, mine did not come with a manual. :-( I suppose
I could try it on a USB 2.0 port to see if that makes any difference.
>
>Via eSATA the drive was recognized as 3TB, I think the 'problem' was
>OS agnostic, since the same happened on my girlfriends mac.
>
The confusing thing is that the kernel says it's a 3 TB device,
but the utility programs say otherwise.
Thanks for your reply, though. I may have to take the device back
to the store I bought it and ask them to demonstrate to me that it
actually works for them as a 3 TB drive. Sigh.
Scott Bennett, Comm. ASMELG, CFIAG
**********************************************************************
* Internet: bennett at mp.cs.niu.edu *
*--------------------------------------------------------------------*
* "A well regulated and disciplined militia, is at all times a good *
* objection to the introduction of that bane of all free governments *
* -- a standing army." *
* -- Gov. John Hancock, New York Journal, 28 January 1790 *
**********************************************************************
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201302141233.r1ECXVXx020101>