From owner-freebsd-bugs Wed Apr 12 8:30:10 2000 Delivered-To: freebsd-bugs@freebsd.org Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (Postfix) with ESMTP id D5F4637B6C3 for ; Wed, 12 Apr 2000 08:30:04 -0700 (PDT) (envelope-from gnats@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.9.3/8.9.2) id IAA46956; Wed, 12 Apr 2000 08:30:04 -0700 (PDT) (envelope-from gnats@FreeBSD.org) Date: Wed, 12 Apr 2000 08:30:04 -0700 (PDT) Message-Id: <200004121530.IAA46956@freefall.freebsd.org> To: freebsd-bugs@FreeBSD.org Cc: From: Mattias Pettersson Subject: Re: i386/17900: 3Com 3C589D and 3CCE589ET doesn't during install of 4.0-RELEASE Reply-To: Mattias Pettersson Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The following reply was made to PR i386/17900; it has been noted by GNATS. From: Mattias Pettersson To: Sheldon Hearn Cc: freebsd-gnats-submit@FreeBSD.ORG Subject: Re: i386/17900: 3Com 3C589D and 3CCE589ET doesn't during install of 4.0-RELEASE Date: Wed, 12 Apr 2000 17:31:19 +0200 Sheldon Hearn wrote: > > On Mon, 10 Apr 2000 07:05:39 MST, eraxpma@verkstad.net wrote: > > > >How-To-Repeat: > > Boot 4.0-RELEASE floppies on (Thinkpad 560Z) laptop. Default pc-card > > io range and irq options 1 or 2 (line 2 and 3). I tried nfs installation. > > Can't ping anything on VT4. > > What revision of /etc/pccard.conf are you using? There appears to have > been support for both your cards for quite a while. Could you show us > your /etc/rc.conf and the output of dmesg(8) while you're at it? > > Ciao, > Sheldon. First of all, this happened during UPGRADE from the kern and mfsroot floppies, so it's running /stand/sysinstall. I have not access to dmesg or netstat and things. Excerpt from the console during boot: pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 pccard: card inserted, slot 0 On VT2: DEBUG: ioctl(3, TIOCCONS, NULL) = 0 (success) ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 11 slot 0 on pccard0 ep0: Ethernet address 00:10:5a:2d:52:e6 logger: not found /etc/pccard_ether: not found #ifconfig -au ep0: flags=8843 mtu 1500 inet 10.50.0.18 netmask 0xffff0000 broadcast 10.50.255.255 ether 00:10:5a:2d:52:e6 media: 10baseT/UTP supported media: 10base2/BNC 10baseT/UTP 10base5/AUI #tcpdump -n tcpdump: listening on ep0 ^C 0 packets received by filter 0 packets dropped by kernel I can ping my own interface address, but nothing else. Card gets activated, since led is lit. Is pccard.conf really used when booting off installation floppies? What I then have is the one from 3.4, but do the installation rely on what's on the hard drive? /Mattias To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message