Date: Tue, 14 Sep 2021 00:48:22 GMT From: Kevin Bowling <kbowling@FreeBSD.org> To: src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-branches@FreeBSD.org Subject: git: 7e7e6f8a5c94 - stable/12 - ixgbe: remove whitespace in function comments Message-ID: <202109140048.18E0mM72045442@gitrepo.freebsd.org>
next in thread | raw e-mail | index | archive | help
The branch stable/12 has been updated by kbowling (ports committer): URL: https://cgit.FreeBSD.org/src/commit/?id=7e7e6f8a5c940692d81da157b74d298c8566a0fb commit 7e7e6f8a5c940692d81da157b74d298c8566a0fb Author: Kevin Bowling <kbowling@FreeBSD.org> AuthorDate: 2021-09-07 03:26:44 +0000 Commit: Kevin Bowling <kbowling@FreeBSD.org> CommitDate: 2021-09-14 00:45:57 +0000 ixgbe: remove whitespace in function comments Remove unnecessary extra whitespace on all function comments, replacing ' * ' with ' * '. This was done automatically via sed using the following transformation: sed 's/^ \* / * /' Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Guinan Sun <guinanx.sun@intel.com> Reviewed-by: Wei Zhao <wei.zhao1@intel.com> Approved by: imp Obtained from: DPDK (40023f73c76579e58a859dab87b4c30278eb2e48) MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D31621 (cherry picked from commit 4cdc5e12a849871e4e8062a62a31f28545901d84) --- sys/dev/ixgbe/ixgbe_82598.c | 238 +++++----- sys/dev/ixgbe/ixgbe_82599.c | 384 ++++++++-------- sys/dev/ixgbe/ixgbe_api.c | 890 ++++++++++++++++++------------------ sys/dev/ixgbe/ixgbe_common.c | 1030 +++++++++++++++++++++--------------------- sys/dev/ixgbe/ixgbe_dcb.c | 6 +- sys/dev/ixgbe/ixgbe_fdir.h | 2 +- sys/dev/ixgbe/ixgbe_mbx.c | 194 ++++---- sys/dev/ixgbe/ixgbe_phy.c | 394 ++++++++-------- sys/dev/ixgbe/ixgbe_vf.c | 166 +++---- sys/dev/ixgbe/ixgbe_x540.c | 188 ++++---- sys/dev/ixgbe/ixgbe_x550.c | 480 ++++++++++---------- 11 files changed, 1986 insertions(+), 1986 deletions(-) diff --git a/sys/dev/ixgbe/ixgbe_82598.c b/sys/dev/ixgbe/ixgbe_82598.c index c1d657afb6f5..1bfdcae6da55 100644 --- a/sys/dev/ixgbe/ixgbe_82598.c +++ b/sys/dev/ixgbe/ixgbe_82598.c @@ -69,14 +69,14 @@ static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *sff8472_data); /** - * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout - * @hw: pointer to the HW structure + * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure * - * The defaults for 82598 should be in the range of 50us to 50ms, - * however the hardware default for these parts is 500us to 1ms which is less - * than the 10ms recommended by the pci-e spec. To address this we need to - * increase the value to either 10ms to 250ms for capability version 1 config, - * or 16ms to 55ms for version 2. + * The defaults for 82598 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 250ms for capability version 1 config, + * or 16ms to 55ms for version 2. **/ void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) { @@ -111,11 +111,11 @@ out: } /** - * ixgbe_init_ops_82598 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure + * ixgbe_init_ops_82598 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure * - * Initialize the function pointers and assign the MAC type for 82598. - * Does not touch the hardware. + * Initialize the function pointers and assign the MAC type for 82598. + * Does not touch the hardware. **/ s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) { @@ -181,12 +181,12 @@ s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) } /** - * ixgbe_init_phy_ops_82598 - PHY/SFP specific init - * @hw: pointer to hardware structure + * ixgbe_init_phy_ops_82598 - PHY/SFP specific init + * @hw: pointer to hardware structure * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. * **/ s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) @@ -245,11 +245,11 @@ out: } /** - * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure + * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure * - * Starts the hardware using the generic start_hw function. - * Disables relaxed ordering Then set pcie completion timeout + * Starts the hardware using the generic start_hw function. + * Disables relaxed ordering Then set pcie completion timeout * **/ s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) @@ -287,12 +287,12 @@ s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) } /** - * ixgbe_get_link_capabilities_82598 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: boolean auto-negotiation value + * ixgbe_get_link_capabilities_82598 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value * - * Determines the link capabilities by reading the AUTOC register. + * Determines the link capabilities by reading the AUTOC register. **/ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -348,10 +348,10 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, } /** - * ixgbe_get_media_type_82598 - Determines media type - * @hw: pointer to hardware structure + * ixgbe_get_media_type_82598 - Determines media type + * @hw: pointer to hardware structure * - * Returns the media type (fiber, copper, backplane) + * Returns the media type (fiber, copper, backplane) **/ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) { @@ -401,10 +401,10 @@ out: } /** - * ixgbe_fc_enable_82598 - Enable flow control - * @hw: pointer to hardware structure + * ixgbe_fc_enable_82598 - Enable flow control + * @hw: pointer to hardware structure * - * Enable flow control according to the current settings. + * Enable flow control according to the current settings. **/ s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) { @@ -548,12 +548,12 @@ out: } /** - * ixgbe_start_mac_link_82598 - Configures MAC link settings - * @hw: pointer to hardware structure - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_start_mac_link_82598 - Configures MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. **/ static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, bool autoneg_wait_to_complete) @@ -597,11 +597,11 @@ static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, } /** - * ixgbe_validate_link_ready - Function looks for phy link - * @hw: pointer to hardware structure + * ixgbe_validate_link_ready - Function looks for phy link + * @hw: pointer to hardware structure * - * Function indicates success when phy link is available. If phy is not ready - * within 5 seconds of MAC indicating link, the function returns error. + * Function indicates success when phy link is available. If phy is not ready + * within 5 seconds of MAC indicating link, the function returns error. **/ static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) { @@ -632,13 +632,13 @@ static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) } /** - * ixgbe_check_mac_link_82598 - Get link/speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true is link is up, false otherwise - * @link_up_wait_to_complete: bool used to wait for link up or not + * ixgbe_check_mac_link_82598 - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @link_up_wait_to_complete: bool used to wait for link up or not * - * Reads the links register to determine if link is up and the current speed + * Reads the links register to determine if link is up and the current speed **/ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up, @@ -722,12 +722,12 @@ out: } /** - * ixgbe_setup_mac_link_82598 - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_82598 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Set the link speed in the AUTOC register and restarts link. + * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -776,12 +776,12 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, /** - * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true if waiting is needed to complete + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true if waiting is needed to complete * - * Sets the link speed in the AUTOC register in the MAC and restarts link. + * Sets the link speed in the AUTOC register in the MAC and restarts link. **/ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -801,12 +801,12 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, } /** - * ixgbe_reset_hw_82598 - Performs hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw_82598 - Performs hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks and - * clears all interrupts, performing a PHY reset, and performing a link (MAC) - * reset. + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performing a PHY reset, and performing a link (MAC) + * reset. **/ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) { @@ -939,10 +939,10 @@ reset_hw_out: } /** - * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq set index + * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq set index **/ s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -965,10 +965,10 @@ s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq clear index (not used in 82598, but elsewhere) + * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq clear index (not used in 82598, but elsewhere) **/ static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { @@ -993,14 +993,14 @@ static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /** - * ixgbe_set_vfta_82598 - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFTA - * @vlan_on: boolean flag to turn on/off VLAN in VFTA - * @vlvf_bypass: boolean flag - unused + * ixgbe_set_vfta_82598 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * @vlvf_bypass: boolean flag - unused * - * Turn on/off specified VLAN in the VLAN filter table. + * Turn on/off specified VLAN in the VLAN filter table. **/ s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, bool vlvf_bypass) @@ -1046,10 +1046,10 @@ s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, } /** - * ixgbe_clear_vfta_82598 - Clear VLAN filter table - * @hw: pointer to hardware structure + * ixgbe_clear_vfta_82598 - Clear VLAN filter table + * @hw: pointer to hardware structure * - * Clears the VLAN filer table, and the VMDq index associated with the filter + * Clears the VLAN filer table, and the VMDq index associated with the filter **/ static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) { @@ -1070,12 +1070,12 @@ static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) } /** - * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value + * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value * - * Performs read operation to Atlas analog register specified. + * Performs read operation to Atlas analog register specified. **/ s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) { @@ -1094,12 +1094,12 @@ s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) } /** - * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register - * @hw: pointer to hardware structure - * @reg: atlas register to write - * @val: value to write + * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write * - * Performs write operation to Atlas analog register specified. + * Performs write operation to Atlas analog register specified. **/ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) { @@ -1116,13 +1116,13 @@ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. - * @hw: pointer to hardware structure - * @dev_addr: address to read from - * @byte_offset: byte offset to read from dev_addr - * @eeprom_data: value read + * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @dev_addr: address to read from + * @byte_offset: byte offset to read from dev_addr + * @eeprom_data: value read * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. **/ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, u8 byte_offset, u8 *eeprom_data) @@ -1190,12 +1190,12 @@ out: } /** - * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. **/ s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) @@ -1205,12 +1205,12 @@ s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. - * @hw: pointer to hardware structure - * @byte_offset: byte offset at address 0xA2 - * @sff8472_data: value read + * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @sff8472_data: value read * - * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C + * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C **/ static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *sff8472_data) @@ -1220,10 +1220,10 @@ static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type - * @hw: pointer to hardware structure + * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type + * @hw: pointer to hardware structure * - * Determines physical layer capabilities of the current configuration. + * Determines physical layer capabilities of the current configuration. **/ u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) { @@ -1322,12 +1322,12 @@ out: } /** - * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple - * port devices. - * @hw: pointer to the HW structure + * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple + * port devices. + * @hw: pointer to the HW structure * - * Calls common function and corrects issue with some single port devices - * that enable LAN1 but not LAN0. + * Calls common function and corrects issue with some single port devices + * that enable LAN1 but not LAN0. **/ void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) { @@ -1356,8 +1356,8 @@ void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) } /** - * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering - * @hw: pointer to hardware structure + * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering + * @hw: pointer to hardware structure * **/ void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw) @@ -1426,11 +1426,11 @@ static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, } /** - * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL + * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL * - * Enables the Rx DMA unit + * Enables the Rx DMA unit **/ s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval) { diff --git a/sys/dev/ixgbe/ixgbe_82599.c b/sys/dev/ixgbe/ixgbe_82599.c index f692c19dc979..0222acd2f0d5 100644 --- a/sys/dev/ixgbe/ixgbe_82599.c +++ b/sys/dev/ixgbe/ixgbe_82599.c @@ -105,12 +105,12 @@ void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) } /** - * ixgbe_init_phy_ops_82599 - PHY/SFP specific init - * @hw: pointer to hardware structure + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. * **/ s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) @@ -239,14 +239,14 @@ setup_sfp_err: } /** - * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read - * @hw: pointer to hardware structure - * @locked: Return the if we locked for this read. - * @reg_val: Value we read from AUTOC + * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read + * @hw: pointer to hardware structure + * @locked: Return the if we locked for this read. + * @reg_val: Value we read from AUTOC * - * For this part (82599) we need to wrap read-modify-writes with a possible - * FW/SW lock. It is assumed this lock will be freed with the next - * prot_autoc_write_82599(). + * For this part (82599) we need to wrap read-modify-writes with a possible + * FW/SW lock. It is assumed this lock will be freed with the next + * prot_autoc_write_82599(). */ s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) { @@ -272,7 +272,7 @@ s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) * @hw: pointer to hardware structure * @autoc: value to write to AUTOC * @locked: bool to indicate whether the SW/FW lock was already taken by - * previous proc_autoc_read_82599. + * previous proc_autoc_read_82599. * * This part (82599) may need to hold the SW/FW lock around all writes to * AUTOC. Likewise after a write we need to do a pipeline reset. @@ -312,11 +312,11 @@ out: } /** - * ixgbe_init_ops_82599 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure + * ixgbe_init_ops_82599 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure * - * Initialize the function pointers and assign the MAC type for 82599. - * Does not touch the hardware. + * Initialize the function pointers and assign the MAC type for 82599. + * Does not touch the hardware. **/ s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) @@ -406,12 +406,12 @@ s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) } /** - * ixgbe_get_link_capabilities_82599 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: true when autoneg or autotry is enabled + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled * - * Determines the link capabilities by reading the AUTOC register. + * Determines the link capabilities by reading the AUTOC register. **/ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -518,10 +518,10 @@ out: } /** - * ixgbe_get_media_type_82599 - Get media type - * @hw: pointer to hardware structure + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure * - * Returns the media type (fiber, copper, backplane) + * Returns the media type (fiber, copper, backplane) **/ enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) { @@ -579,10 +579,10 @@ out: } /** - * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3 - * @hw: pointer to hardware structure + * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3 + * @hw: pointer to hardware structure * - * Disables link during D3 power down sequence. + * Disables link during D3 power down sequence. * **/ void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) @@ -602,12 +602,12 @@ void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) } /** - * ixgbe_start_mac_link_82599 - Setup MAC link settings - * @hw: pointer to hardware structure - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_start_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. **/ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, bool autoneg_wait_to_complete) @@ -670,12 +670,12 @@ out: } /** - * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser - * @hw: pointer to hardware structure + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively shutting down the Tx - * laser on the PHY, effectively halting physical link. + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. **/ void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { @@ -693,12 +693,12 @@ void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser - * @hw: pointer to hardware structure + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively turning on the Tx - * laser on the PHY, effectively starting physical link. + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. **/ void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { @@ -712,16 +712,16 @@ void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser - * @hw: pointer to hardware structure + * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser + * @hw: pointer to hardware structure * - * When the driver changes the link speeds that it can support, - * it sets autotry_restart to true to indicate that we need to - * initiate a new autotry session with the link partner. To do - * so, we set the speed then disable and re-enable the Tx laser, to - * alert the link partner that it also needs to restart autotry on its - * end. This is consistent with true clause 37 autoneg, which also - * involves a loss of signal. + * When the driver changes the link speeds that it can support, + * it sets autotry_restart to true to indicate that we need to + * initiate a new autotry session with the link partner. To do + * so, we set the speed then disable and re-enable the Tx laser, to + * alert the link partner that it also needs to restart autotry on its + * end. This is consistent with true clause 37 autoneg, which also + * involves a loss of signal. **/ void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { @@ -739,11 +739,11 @@ void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_set_hard_rate_select_speed - Set module link speed - * @hw: pointer to hardware structure - * @speed: link speed to set + * ixgbe_set_hard_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set * - * Set module link speed via RS0/RS1 rate select pins. + * Set module link speed via RS0/RS1 rate select pins. */ void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) @@ -768,12 +768,12 @@ void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, } /** - * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Implements the Intel SmartSpeed algorithm. + * Implements the Intel SmartSpeed algorithm. **/ s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -880,12 +880,12 @@ out: } /** - * ixgbe_setup_mac_link_82599 - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_setup_mac_link_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * Set the link speed in the AUTOC register and restarts link. + * Set the link speed in the AUTOC register and restarts link. **/ s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -998,12 +998,12 @@ out: } /** - * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true if waiting is needed to complete + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true if waiting is needed to complete * - * Restarts link on PHY and MAC based on settings passed in. + * Restarts link on PHY and MAC based on settings passed in. **/ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -1023,12 +1023,12 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, } /** - * ixgbe_reset_hw_82599 - Perform hardware reset - * @hw: pointer to hardware structure + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, perform a PHY reset, and perform a link (MAC) - * reset. + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. **/ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) { @@ -1224,8 +1224,8 @@ static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) } /** - * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. - * @hw: pointer to hardware structure + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure **/ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) { @@ -1297,9 +1297,9 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) } /** - * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register + * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register **/ static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) { @@ -1338,9 +1338,9 @@ static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) } /** - * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially + * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially * contains just the value of the Rx packet buffer allocation **/ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) @@ -1364,11 +1364,11 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) } /** - * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially + * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially * contains just the value of the Rx packet buffer allocation - * @cloud_mode: true - cloud mode, false - other mode + * @cloud_mode: true - cloud mode, false - other mode **/ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl, bool cloud_mode) @@ -1403,9 +1403,9 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl, } /** - * ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue - * @hw: pointer to hardware structure - * @dropqueue: Rx queue index used for the dropped packets + * ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue + * @hw: pointer to hardware structure + * @dropqueue: Rx queue index used for the dropped packets **/ void ixgbe_set_fdir_drop_queue_82599(struct ixgbe_hw *hw, u8 dropqueue) { @@ -1461,15 +1461,15 @@ do { \ } while (0) /** - * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash - * @input: input bitstream to compute the hash on - * @common: compressed common input dword + * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash + * @input: input bitstream to compute the hash on + * @common: compressed common input dword * - * This function is almost identical to the function above but contains - * several optimizations such as unwinding all of the loops, letting the - * compiler work out all of the conditional ifs since the keys are static - * defines, and computing two keys at once since the hashed dword stream - * will be the same for both keys. + * This function is almost identical to the function above but contains + * several optimizations such as unwinding all of the loops, letting the + * compiler work out all of the conditional ifs since the keys are static + * defines, and computing two keys at once since the hashed dword stream + * will be the same for both keys. **/ u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, union ixgbe_atr_hash_dword common) @@ -1528,11 +1528,11 @@ u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, } /** - * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter - * @hw: pointer to hardware structure - * @input: unique input dword - * @common: compressed common input dword - * @queue: queue index to direct traffic to + * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter + * @hw: pointer to hardware structure + * @input: unique input dword + * @common: compressed common input dword + * @queue: queue index to direct traffic to * * Note that the tunnel bit in input must not be set when the hardware * tunneling support does not exist. @@ -1601,15 +1601,15 @@ do { \ } while (0) /** - * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash - * @input: input bitstream to compute the hash on - * @input_mask: mask for the input bitstream + * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash + * @input: input bitstream to compute the hash on + * @input_mask: mask for the input bitstream * - * This function serves two main purposes. First it applies the input_mask - * to the atr_input resulting in a cleaned up atr_input data stream. - * Secondly it computes the hash and stores it in the bkt_hash field at - * the end of the input byte stream. This way it will be available for - * future use without needing to recompute the hash. + * This function serves two main purposes. First it applies the input_mask + * to the atr_input resulting in a cleaned up atr_input data stream. + * Secondly it computes the hash and stores it in the bkt_hash field at + * the end of the input byte stream. This way it will be available for + * future use without needing to recompute the hash. **/ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, union ixgbe_atr_input *input_mask) @@ -1660,13 +1660,13 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, } /** - * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks - * @input_mask: mask to be bit swapped + * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks + * @input_mask: mask to be bit swapped * - * The source and destination port masks for flow director are bit swapped - * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to - * generate a correctly swapped value we need to bit swap the mask and that - * is what is accomplished by this function. + * The source and destination port masks for flow director are bit swapped + * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to + * generate a correctly swapped value we need to bit swap the mask and that + * is what is accomplished by this function. **/ static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) { @@ -2000,16 +2000,16 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, } /** - * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter - * @hw: pointer to hardware structure - * @input: input bitstream - * @input_mask: mask for the input bitstream - * @soft_id: software index for the filters - * @queue: queue index to direct traffic to - * @cloud_mode: unused + * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter + * @hw: pointer to hardware structure + * @input: input bitstream + * @input_mask: mask for the input bitstream + * @soft_id: software index for the filters + * @queue: queue index to direct traffic to + * @cloud_mode: unused * - * Note that the caller to this function must lock before calling, since the - * hardware writes must be protected from one another. + * Note that the caller to this function must lock before calling, since the + * hardware writes must be protected from one another. **/ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, union ixgbe_atr_input *input, @@ -2067,12 +2067,12 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, } /** - * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value * - * Performs read operation to Omer analog register specified. + * Performs read operation to Omer analog register specified. **/ s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) { @@ -2091,12 +2091,12 @@ s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) } /** - * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: atlas register to write - * @val: value to write + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write * - * Performs write operation to Omer analog register specified. + * Performs write operation to Omer analog register specified. **/ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) { @@ -2113,12 +2113,12 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) *** 6480 LINES SKIPPED ***
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202109140048.18E0mM72045442>