Date: Mon, 3 Apr 2000 08:27:05 -0700 (PDT) From: Chen Liu <chen@netcorps.com> To: freebsd-questions@FreeBSD.org Message-ID: <200004031527.IAA15958@work.netcorps.com>
next in thread | raw e-mail | index | archive | help
HI, I got this message when I start "startx" after "make world" from 3.4 to 4.0. Thanks! Script started on Mon Apr 3 00:02:52 2000 > startx XFree86 Version 3.3.5 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 23 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.1-STABLE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, generic Using syscons driver with X support (version 2.0) (using VT number 9) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: options: "ctrl:swapcaps" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) XKB: variant: "" (**) XKB: options: "" (**) XKB: keymap: "xfree86(en_US)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 (**) Mouse: 3 button emulation (timeout: 50ms) (**) SVGA: Graphics device ID: "sis6326" (**) SVGA: Monitor ID: "compaq" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) SVGA: PCI: SiS 6326 rev 11, Memory @ 0xdf000000, MMIO @ 0xefef0000, I/O @ 0xbc00 (--) SVGA: using programmable clocks. (--) SVGA: chipset: sis6326 (**) SVGA: videoram: 4096k (**) SVGA: Using 24 bpp, Depth 24, Color weight: 888 (--) SVGA: Maximum allowed dot-clock: 154.421 MHz (--) SVGA: There is no mode definition named "640x480" (--) SVGA: Removing mode "640x480" from list of valid modes. (**) SVGA: Mode "800x600": mode clock = 50.000 (--) SVGA: There is no mode definition named "1024x768" (--) SVGA: Removing mode "1024x768" from list of valid modes. (--) SVGA: There is no mode definition named "1280x1024" (--) SVGA: Removing mode "1280x1024" from list of valid modes. (--) SVGA: Virtual resolution set to 800x600 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: Using Linear Frame Buffer at 0x0df000000, Size 4MB (--) SVGA: SIS: Memory mapped I/O selected at 0x0efef0000 (**) SVGA: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: Pixmap cache disabled - no video memory available (--) SVGA: XAA: Caching tiles (--) SVGA: XAA: Horizontal and vertical lines and segments Fatal server error: Cannot open mouse (Too many levels of symbolic links) When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). > exit exit Script done on Mon Apr 3 00:03:03 2000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004031527.IAA15958>