Date: Thu, 28 Aug 2008 10:36:22 -0700 From: Sean Bruno <sbruno@miralink.com> To: freebsd-ports@freebsd.org Subject: -d 3ware,0 not working with 3ware 9550(sx) Message-ID: <48B6E216.30609@miralink.com>
next in thread | raw e-mail | index | archive | help
I sent this over to the smartmontools mailing list, but thought I would
post it here in case anyone else has run into this:
Using smartmontools 5.38 under FreeBSD 6/7 doesn't seem to work with the
following card:
twa0@pci4:12:0: class=0x010400 card=0x100313c1 chip=0x100313c1 rev=0x00
hdr=0x00
vendor = '3ware
Inc.'
device = '9550SX/9590SE Series SATA2 Raid
Controller'
class = mass
storage
subclass = RAID
smartctl command output:
Source # smartctl -d3ware,0
/dev/da0
smartctl version 5.36 [i386-portbld-freebsd6.3] Copyright (C) 2002-6
Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
0)
Please contact
smartmontools-support@lists.sourceforge.net
Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
0)
Please contact
smartmontools-support@lists.sourceforge.net
Smartctl: Device Read Identity Failed (not an ATA/ATAPI
device)
A mandatory SMART command failed: exiting. To continue, add one or more
'-T per.
Source #
--
Sean Bruno
MiraLink Corporation
6015 NE 80th Ave, Ste 100
Portland, OR 97218
Phone 503-621-5143
Fax 503-621-5199
MSN: sbruno@miralink.com
Google: seanwbruno@gmail.com
Yahoo: sean_bruno@yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48B6E216.30609>