Date: Mon, 29 Sep 2003 21:45:54 -0700 (PDT) From: Jonathan Windle <thesaint@freeshell.org> To: freebsd-bugs@freebsd.org Subject: CSA Driver Issues Message-ID: <Pine.NEB.4.58.0309292126240.22159@otaku.freeshell.org>
next in thread | raw e-mail | index | archive | help
Hello, I have been having a couple of problems with the driver (I believe anyway). First problem I have had is when I boot my system (dual boot system) into windows and then reboot into FreeBSD. FreeBSD doesn't seem to detect the sound card at all and I can no use it. However if I fully shut down my system from windows and then power it on the sound works fine of course. Seems like windows is leaving the card in a state that FreeBSD can not recover from. I'm not sure what can be done about this. My second and more important problem is recently I installed gnomemeeting. When I tryed to send audio it was all garbled on the other end. At first I thought this might be a simple codec problem so I headed over to irc.gnome.org/#gnomemeeting and had a talk with them. I eventually tryed there audio test where it records and sound bit and plays it back locally. This sound bit also sounded garbled. This leaves me to believe it is either a mixer config problem or a driver problem. Here is my mixer configuration: Mixer vol is currently set to 75:75 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer line is currently set to 0:0 Mixer mic is currently set to 0:0 Mixer cd is currently set to 0:0 Mixer rec is currently set to 80:80 Mixer line1 is currently set to 0:0 Mixer phin is currently set to 0:0 Mixer phout is currently set to 0:0 Mixer video is currently set to 0:0 Mixer monitor is currently set to 0:0 and here is my dmesg info for the card: pcm0: <CS461x PCM Audio> on csa0 pcm0: <Cirrus Logic CS4297B ac97 codec> Jonathan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.4.58.0309292126240.22159>