Skip site navigation (1)Skip section navigation (2)
Date:               Thu, 18 Jul 1996 09:11:40 GMT+0100
From:      "Kees Jan Koster" <Kees.Koster@nym.sc.philips.com>
To:        hardware@freebsd.org
Subject:         SOYO SY-30F2 blues
Message-ID:  <3E5A6A80622@NLNMG01.nym.sc.philips.com>

next in thread | raw e-mail | index | archive | help
FreeBSD 2.1.0-RELEASE #2: Tue Jul 16 21:43:57 MET DST 1996
    root@LikeEver:/usr/src/sys/compile/LIKEEVER
CPU: i486DX (486-class CPU)
real memory  = 8388608 (8192K bytes)
avail memory = 6885376 (6724K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 drq 5 on isa
ed0: address 08:00:57:81:00:00, type NE2000 (16 bit) 
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <iPnoee rDCR-MOA ATIPoMed lRDU-1P42 X1000/1E0.A0>, removable, dma, iordis
wcd0: 689Kb/sec, 128Kb cache, audio play, 256 volume levels, ejectable tray
wcd0: medium type unknown, unlocked
npx0 on motherboard
npx0: INT 16 interface
pcibus_setup(1):	mode1res=0x80000000 (0x80000000), mode2res=0xff (0x0e)
pcibus_setup(2):	mode1res=0x80000000 (0x80000000)
pcibus_check:	device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 is there (id=c8221045)
Probing for devices on the PCI bus:
	configuration mode 1 allows 32 devices.
pci0:16: OPTI, device=0xc822, class=bridge (host) [no driver assigned]
vga0 <VGA-compatible display device> rev 67 int a irq ?? on pci0:17
register_mem: bus=0 base=fc000000 limit=ffffffff
	mapreg[10] type=0 addr=fc000000 size=4000000.
ncr0 <ncr 53c810 scsi> rev 1 int a irq 15 on pci0:18
register_io:  bus=0 base=d000 limit=d0ff
	mapreg[10] type=1 addr=0000d000 size=0100.
register_mem: bus=0 base=fc000000 limit=fc0000ff
	mapreg[14] type=0 addr=fc000000 size=0100.
	reg20: virtual=0xf1ac0000 physical=0xfc000000 size=0x100
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl23 95/09/07)
(ncr0:0:0): "MAXTOR LXT-213S 4.20" type 0 fixed SCSI 1
sd0(ncr0:0:0): Direct-Access 202MB (415436 512 byte sectors)
sd0(ncr0:0:0): with 1310 cyls, 7 heads, and an average 45 sectors/track
(ncr0:1:0): "IMPRIMIS 94601-15 4638" type 0 fixed SCSI 1
sd1(ncr0:1:0): Direct-Access 1001MB (2050995 512 byte sectors)
sd1(ncr0:1:0): with 1931 cyls, 15 heads, and an average 70 sectors/track
pci0: uses 67109120 bytes of memory from fc000000 upto ffffffff.
pci0: uses 256 bytes of I/O space from d000 upto d0ff.
BIOS Geometries:
 0:03fe063a 0..1022=1023 cylinders, 0..6=7 heads, 1..58=58 sectors
 1:03f9203d 0..1017=1018 cylinders, 0..32=33 heads, 1..61=61 sectors
 0 accounted for
sd0s1: type 0x6, start 58, end = 204623, size 204566 : OK
sd0s2: type 0xa5, start 204624, end = 415337, size 210714 : OK
sd1s1: type 0xa5, start 61, end = 1024616, size 1024556 : OK
sd1s2: type 0xa5, start 1024617, end = 1125266, size 100650 : OK
sd1s3: type 0xa5, start 1125267, end = 2049233, size 923967 : OK
ed0: device timeout



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E5A6A80622>