Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Jul 2001 12:47:58 -0400 (EDT)
From:      Joe Clarke <marcus@marcuscom.com>
To:        Ralph Huntington <rjh@mohawk.net>
Cc:        <questions@FreeBSD.ORG>
Subject:   Re: kernel compile fails
Message-ID:  <20010709124641.N82819-100000@shumai.marcuscom.com>
In-Reply-To: <Pine.BSF.4.21.0107091237060.48529-100000@mohegan.mohawk.net>

next in thread | previous in thread | raw e-mail | index | archive | help
While this could be an issue with the CPU or MB (my ti_fw2.h doesn't show
any non-hex digits), you might be able to workaround it by building your
kernel like:

make NO_MODULES=YES depend all install

That assumes you don't have device ti in your kernel config.

Joe Clarke

On Mon, 9 Jul 2001, Ralph Huntington wrote:

> uname -a:
>
> FreeBSD ourhost.ourdomain.com 4.3-RELEASE FreeBSD 4.3-RELEASE #0:
> 	Sat Apr 21 10:54:49 GMT 2001
> 	jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC  i386
>
> Trying to compile a new kernel. Using kernel configs that we have used a
> thousand times before. Replaced everything hardware, MB, RAM, dives,
> cables. Keep getting these errors when the make reaches this point:
>
> cc -O -pipe   -D_KERNEL -Wall -Wredundant-decls -Wnested-externs
> -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline
> -Wcast-qual  -fformat-extensions -ansi -DKLD_MODULE -nostdinc -I-  -I. -I@
> -I/usr/include  -mpreferred-stack-boundary=2 -c
> /usr/src/sys/modules/ti/../../pci/if_ti.c
>
> In file included from /usr/src/sys/modules/ti/../../pci/if_ti.c:123:
> @/pci/ti_fw2.h:2443: nondigits in number and not hexadecimal
> @/pci/ti_fw2.h:2443: nondigits in number and not hexadecimal
> @/pci/ti_fw2.h:2581: nondigits in number and not hexadecimal
> @/pci/ti_fw2.h:2652: nondigits in number and not hexadecimal
> @/pci/ti_fw2.h:2652: nondigits in number and not hexadecimal
> @/pci/ti_fw2.h:2652: numeric constant contains digits beyond the radix
> @/pci/ti_fw2.h:2677: warning: large integer implicitly truncated to unsigned type
>
> and the like, a zillion times or so, and finally:
>
> *** Error code 1
>
> Stop in /usr/src/sys/modules/ti.
> *** Error code 1
>
> Stop in /usr/src/sys/modules.
> *** Error code 1
>
>
> Looking at the file "/usr/src/sys/modules/ti/../../pci/if_ti.c" indicates
> it is "Alteon Networks Tigon PCI gigabit ethernet driver for FreeBSD" but
> we have rem'd out all ethernet devices in kernel config file except fxp0,
> which is what we are using. Again, this is a config and compile we have
> done many times before.
>
> If anyone has a clue, thanks in advance for sharing it.	- Ralph
>
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010709124641.N82819-100000>