From owner-freebsd-questions Wed Feb 7 17:21:41 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id RAA18393 for questions-outgoing; Wed, 7 Feb 1996 17:21:41 -0800 (PST) Received: from fly.HiWAAY.net (root@fly.HiWAAY.net [204.214.4.2]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id RAA18385 for ; Wed, 7 Feb 1996 17:21:08 -0800 (PST) Received: from max2-138.HiWAAY.net by fly.HiWAAY.net; (5.65v3.0/1.1.8.2/21Sep95-1003PM) id AA19562; Wed, 7 Feb 1996 19:20:21 -0600 Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Wed, 7 Feb 1996 19:20:30 -0600 To: questions@freefall.freebsd.org From: dkelly@hiwaay.net (David Kelly) Subject: Re: Some questions :) Cc: toja@tele.pw.edu.pl Sender: owner-questions@FreeBSD.ORG Precedence: bulk toja@tele.pw.edu.pl (Slawomir Witold Gorniak) said: >1. when I added the driver for my ATAPI CD-ROM, on second IDE >bus as master, the red controller LED is always lit - it >starts just after probing for wdc1. This problem can be resolved >only .. by not including the ATAPI driver :( Doesn't hurt anything does it? However I just noticed the same thing on my system after removing the IDE hard drive and placing the ATAPI on the primary IDE interface. Am not sure if the secondary IDE interface is still enabled in BIOS or not. -- David Kelly N4HHE, n4hhe@amsat.org, dkelly@hiwaay.net ============================================================= To invent, you need a good imagination and a pile of junk. - Thomas Edison