Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 28 Dec 2013 21:48:28 +1100
From:      Jason Birch <jbirch@jbirch.net>
To:        Pol Hallen <freebsdenml@fuckaround.org>
Cc:        FreeBSD Questions <freebsd-questions@freebsd.org>
Subject:   Re: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
Message-ID:  <CAA=KUhsrjZej0-300Ekz24hk=fHgoxsBFUBY0tYWf09HF_149Q@mail.gmail.com>
In-Reply-To: <52BC729E.7070407@fuckaround.org>
References:  <52BC729E.7070407@fuckaround.org>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
>
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 08 80 00 00 10 00
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to
> ready change, medium may have changed)
> (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 08 80 00 00 10 00
> (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> (da0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to
> ready change, medium may have changed)
> (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> g_vfs_done():da0s1[READ(offset=8192, length=8192)]error = 6
>
> and mount point become dead
>

I had a similar situation with an internal drive (Though I don't think I
had the "medium may have changed" message) and it just came down to a loose
cable in my case. Do you have the same issue on other computers or other
USB ports?



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CAA=KUhsrjZej0-300Ekz24hk=fHgoxsBFUBY0tYWf09HF_149Q>