Date: Sat, 19 Feb 2005 12:23:45 -0700 From: Chie & Kevin Reinholz <reinholz@sandiego.edu> To: freebsd-hardware@freebsd.org Subject: pccard1: Card has no functions! Message-ID: <42179241.2070306@sandiego.edu>
next in thread | raw e-mail | index | archive | help
I've seen similar errors (problems with pcmcia on 5.x) posted to this list before, but not this one specifically and no answers that would help me. . . I have a built-in wireless card that FreeBSD designates as pccard0. This card works perfectly fine and I've never had any problems with it. When I insert a pcmcia ethernet card, however, activation of pccard1 fails every time. I've tried this with several NICs, including a 3Com Etherlink III 3C589D (old, but listed as supported) and a 3Com Megahertz 3CCFE574BT. Both NICs work fine in Windows 2000 and XP, and the Etherlink III even works in Rhapsody (Mac OS X Server) DR2 for PC Compatibles. I've enabled the pcmcia and 3com drivers in my custom kernel, but I've also tried this with the same result using a generic 5.3-RELEASE kernel. Here's my dmesg: reinholz@fongsaiyuk$ dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Sun Jan 16 13:50:32 MST 2005 reinholz@bsd.domain.actdsltmp:/usr/src/sys/i386/compile/NEWKER Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Celeron (697.42-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 125698048 (119 MB) avail memory = 113352704 (108 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM AXXXXXX4> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x22> port 0x66,0x62 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf108-0xf10b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: no PRT entry for 0.16.INTA agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: bad initial aperture size, disabling device_attach: agp0 attach returned 6 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PAGP - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 cbb0: <TI1410 PCI-CardBus Bridge> irq 6 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 atapci0: <AcerLabs Aladdin UDMA66 controller> port 0x7050-0x705f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 15 at device 16.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached) cbb1: <O2Micro OZ6812/6872 PCI-CardBus Bridge> irq 10 at device 19.0 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x81c00000-0x81c00fff irq 10 at device 20.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 ppc0: <Standard parallel printer port> port 0x3bc-0x3bf irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounter "TSC" frequency 697418957 Hz quality 800 Timecounters tick every 10.000 msec ad0: 9590MB <IBM-DJSA-210/JS2OABCA> [19485/16/63] at ata0-master UDMA66 acd0: CDROM <OIP-SD2400A/BN/VER-2.0a> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s4a wi0: <IBM Corporation IBM High Rate Wireless LAN PC Card> at port 0x100-0x13f irq 6 function 0 config 1 on pccard0 wi0: using Lucent Embedded WaveLAN/IEEE wi0: Lucent Firmware: Station (6.14.1) wi0: Ethernet address: 00:02:2d:25:95:e8 wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps CIS is too long -- truncating pccard1: Card has no functions! cbb1: PC Card card activation failed reinholz@fongsaiyuk$ Any ideas why pccard0 would work fine but activation of pccard1 would fail? Thanks, Kevin Reinholz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42179241.2070306>