Date: Wed, 1 Sep 2004 18:28:45 +1000 From: Peter Jeremy <PeterJeremy@optushome.com.au> To: Wilko Bulte <wilko@FreeBSD.org> Cc: freebsd-alpha@FreeBSD.org Subject: FreeBSD 5.3-BETA2/alpha successes/failures Message-ID: <20040901082845.GA60151@cirb503493.alcatel.com.au> In-Reply-To: <20040831120529.GB58440@cirb503493.alcatel.com.au> References: <20040829151021.GA43674@bobbi.cse.buffalo.edu> <20040830191325.GA53006@freebie.xs4all.nl> <20040831120529.GB58440@cirb503493.alcatel.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
--/04w6evG8XlLl3ft
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Yesterday, I wrote:
>On Mon, 2004-Aug-30 21:13:25 +0200, Wilko Bulte wrote:
>>FreeBSD 5.3-BETA2 for the Alpha architecture:
>
>disk2 boots and seems to run on my AS400 4/233. Some slight glitches:
...
I picked up a further glitch which appeared on both the AS400 and ES40
so I don't think it was my imagination:
When running the fixit shell, 'Ctrl-C' violates POLA. It doesn't seem
to interrupt the running process but continued pressing will cause the
system to being up a box "Installation interrupt" and halt.
>I've installed 5.3-BETA2 from the miniinst CD and it seems to be
>running nicely. I've left it doing a buildworld with /usr/{src,obj}
>mounted via NFS (due to lack of local diskspace). I don't expect it
>to finish for a while and will report back if there are problems.
The buildworld wasn't as successful - trying to buildworld a fresh
RELENG_5 using
sh -c 'MAKEOBJDIRPREFIX=/home/obj/asv400 make CPUTYPE=ev45 buildworld'
consistently dies with:
===> gnu/usr.bin/cc/cc1plus
gperf -o -C -E -k '1-6,$' -j1 -D -N 'libc_name_p' -L ANSI-C /home/src5/gnu/usr.
bin/cc/cc1plus/../../../../contrib/gcc/cp/cfns.gperf > cfns.h
No words in input file, did you forget to prepend %% or use -t accidentally?
*** Error code 1
Stop in /home/src5/gnu/usr.bin/cc/cc1plus.
My only problem is that I can't reproduce this from the command line.
I've found /usr/bin/gperf,
/home/obj/asv400/home/src5/alpha/legacy/usr/bin/gperf and
/home/obj/asv400/home/src5/alpha/home/src5/gnu/usr.bin/gperf/gperf and
all of them appear to correctly process that input file. I've gone
through all the gperf executables visible on the system and they
either correctly process the input file or don't execute (because they
need RELENG_4 shared objects or are i386 executables). I'd appreciate
suggestions here.
I've also tried booting a couple of systems at work with mixed
results. I would be very unpopular if I installed FreeBSD on these
systems so I'm limited to experimenting with the live filesystem CD.
(And have been looking at the commands that you'd need to restore a
local system from a dump on a remote system).
On a AS4100 4xEV5/466 and 8GB RAM (logically reduced to 2GB),
it hangs just after GEOM configures md0c.
On a ES40 4xEV67/667 and 2GB RAM, it boots successfully and I could
bring up a DE600 (fxp) interface and access files via NFS.
I haven't tried a DS10 (I'll have to see if I can pick one that can be
rebooted without causing problems) or a ES45 (I don't think this is
supported and finding one to experiment on could also be difficult).
I've attached console logs for all three systems. Feel free to add this
to your web page.
--
Peter Jeremy
--/04w6evG8XlLl3ft
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: attachment; filename="as4100.log"
Content-Transfer-Encoding: 8bit
P00>>>sho dev
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 € SCSI Bus ID 7
dka500.5.0.1.1 DKA500 RRD47 1206
polling isp0 (QLogic ISP10X0) slot 2, bus 0 PCI, hose 1 SCSI Bus ID 7
dkb0.0.0.2.1 DKB0 COMPAQ BD018122C9 B016
dkb100.1.0.2.1 DKB100 COMPAQ BD03664553 3B08
mkb500.5.0.2.1 MKB500 TLZ10 04a8
polling isp1 (QLogic ISP10X0) slot 4, bus 0 PCI, hose 1 SCSI Bus ID 6
dkc0.0.0.4.1 DKC0 COMPAQ BD0366459B B016
dkc100.1.0.4.1 DKC100 COMPAQ BD0366459B B016
dkc200.2.0.4.1 DKC200 COMPAQ BD009122BA 3B07
jkc707.7.0.4.1 JKC707 ASE AM DEC WSE BSD/V1 TMV2
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0 RX23
polling isp2 (QLogic ISP10X0) slot 3, bus 0 PCI, hose 0 SCSI Bus ID 6
dkd0.0.0.3.0 DKD0 COMPAQ BD0366459B B016
dkd100.1.0.3.0 DKD100 COMPAQ BD0366459B B016
dkd200.2.0.3.0 DKD200 COMPAQ BD009122BA 3B07
dkd300.3.0.3.0 DKD300 RZ1CB-CS 0844
jkd707.7.0.3.0 JKD707 ASE AM DEC WSE BSD/V1 TMV2
polling isp3 (QLogic ISP10X0) slot 4, bus 0 PCI, hose 0 SCSI Bus ID 7
dke0.0.0.4.0 DKE0 COMPAQ BD018122C9 B016
dke100.1.0.4.0 DKE100 COMPAQ BD03664553 3B08
polling tulip0 (DE500-BA) slot 3, bus 0 PCI, hose 1
ewa0.0.0.3.1 08-00-2B-C4-F6-73 FastFD (Full Duplex)
polling tulip1 (DE500-BA) slot 5, bus 0 PCI, hose 1
ewb0.0.0.5.1 08-00-2B-C5-18-CD FastFD (Full Duplex)
polling tulip2 (DE500-BA) slot 2, bus 0 PCI, hose 0
ewc0.0.0.2.0 08-00-2B-C5-03-A4 FastFD (Full Duplex)
polling ei0 (DE602-AA) slot 4, bus 2 PCI, hose 0
eia0.0.0.2004.0 00-08-02-55-FC-42 FastFD (Full Duplex)
polling ei1 (DE602-AA) slot 5, bus 2 PCI, hose 0
eib0.0.0.2005.0 00-08-02-55-FC-43 FastFD (Full Duplex)
P00>>>b dka500
Initializing...
SROM V3.0 on cpu0
SROM V3.0 on cpu2
SROM V3.0 on cpu1
SROM V3.0 on cpu3
XSROM V6.0 on cpu0
XSROM V6.0 on cpu1
XSROM V6.0 on cpu3
XSROM V6.0 on cpu2
BCache testing complete on cpu0
BCache testing complete on cpu1
BCache testing complete on cpu3
BCache testing complete on cpu2
mem_pair0 - 2048 MB
mem_pair1 - 2048 MB
mem_pair2 - 2048 MB
mem_pair3 - 2048 MB
20..20..20..20..21..21..21..21..23..
please wait 160 seconds for T24 to complete
24..24..24..24..
Memory testing complete on cpu0
Memory testing complete on cpu3
Memory testing complete on cpu1
Memory testing complete on cpu2
starting console on CPU 0
sizing memory
0 2048 MB EDO
1 2048 MB EDO
2 2048 MB EDO
3 2048 MB EDO
starting console on CPU 1
starting console on CPU 2
starting console on CPU 3
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - QLogic ISP10X0
bus 0 slot 3 - DE500-BA
bus 0 slot 4 - QLogic ISP10X0
bus 0 slot 5 - DE500-BA
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 2 - DE500-BA
bus 0 slot 3 - QLogic ISP10X0
bus 0 slot 4 - QLogic ISP10X0
bus 0 slot 5 - PCI-PCI Bridge
probing PCI-PCI Bridge, bus 2
bus 2 slot 4 - DE602-AA
bus 2 slot 5 - DE602-AA
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 0, slot 2
tulip0, hose 1, bus 0, slot 3
isp1, hose 1, bus 0, slot 4
tulip1, hose 1, bus 0, slot 5
floppy0, hose 0, bus 1, slot 0
tulip2, hose 0, bus 0, slot 2
isp2, hose 0, bus 0, slot 3
isp3, hose 0, bus 0, slot 4
ei0, hose 0, bus 2, slot 4
ei1, hose 0, bus 2, slot 5
System temperature is 22 degrees C
AlphaServer 4100 Console V6.0-4, 10-MAY-2001 10:11:42
CPU 0 booting
(boot dka500.5.0.1.1 -flags A)
block 0 of dka500.5.0.1.1 is a valid boot block
reading 409 blocks from dka500.5.0.1.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 33200
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4000200010115
OSF PAL rev: 0x4000200020117
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.wbnet, Mon Aug 30 03:48:07 UTC 2004)
Memory: 8388608 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5b77f0+0x4d110 syms=[0x8+0x68b20+0x8+0x5564f]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000346fe0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Mon Aug 30 17:59:15 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaServer 4100
AlphaServer 4100 5/466 4MB, 467MHz
8192 byte page size, 4 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000200020117
real memory = 8587698176 (8189 MB)
avail memory = 8410095616 (8020 MB)
RCM>halt
Focus returned to COM port
....
OK set hw.physmem="2G"
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000346fe0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Mon Aug 30 17:59:15 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000dfe000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000dfe0e0.
AlphaServer 4100
AlphaServer 4100 5/466 4MB, 467MHz
8192 byte page size, 4 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000200020117
real memory = 2147483648 (2048 MB)
Physical memory chunk(s):
0x00e20000 - 0x7e3d3fff, 2103132160 bytes (256730 pages)
avail memory = 2091655168 (1994 MB)
smp_start_secondary: starting cpu 1
smp_start_secondary: cpu 1 started
smp_start_secondary: starting cpu 2
smp_start_secondary: cpu 2 started
smp_start_secondary: starting cpu 3
smp_start_secondary: cpu 3 started
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 4, range 32, base 01fffb00, size 8, enabled
map[14]: type 1, range 32, base 07f5dd00, size 8, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x02
bus=0, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01fffc00, size 8, enabled
map[14]: type 1, range 32, base 07f5e000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01fffd00, size 7, enabled
map[14]: type 1, range 32, base 07f5de00, size 7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
bus=0, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01fffe00, size 8, enabled
map[14]: type 1, range 32, base 07f5f000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01ffff00, size 7, enabled
map[14]: type 1, range 32, base 07f5df00, size 7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
bus=0, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=255
sym0: <810> port 0x1fffb00-0x1fffbff mem 0x7f5dd00-0x7f5ddff at device 1.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x7f5dd00
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 265 msec, 33540 KHz
sym0: Delay (GEN=11): 281 msec, 31631 KHz
sym0: Delay (GEN=11): 281 msec, 31631 KHz
sym0: interrupting at IRQ 0x10 (vec 0xb40)
sym0: [GIANT-LOCKED]
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.8
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1fffc00-0x1fffcff mem 0x7f5e000-0x7f5efff at device 2.0 on pci0
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x7f5e000
isp0: using Memory space register mapping
isp0: interrupting at IRQ 0x0 (vec 0xb80)
isp0: [GIANT-LOCKED]
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
dc0: <Intel 21143 10/100BaseTX> port 0x1fffd00-0x1fffd7f mem 0x7f5de00-0x7f5de7f at device 3.0 on pci0
dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1fffd00
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 08:00:2b:c4:f6:73
dc0: interrupting at IRQ 0x4 (vec 0xbc0)
dc0: [GIANT-LOCKED]
isp1: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1fffe00-0x1fffeff mem 0x7f5f000-0x7f5ffff at device 4.0 on pci0
isp1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x7f5f000
isp1: using Memory space register mapping
isp1: interrupting at IRQ 0x8 (vec 0xc00)
isp1: [GIANT-LOCKED]
isp1: Differential Mode
isp1: Ultra Mode Capable
isp1: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp1: Last F/W revision was 5.57.1
isp1: 243 max I/O commands supported
isp1: Initiator ID is 6 on Channel 0
dc1: <Intel 21143 10/100BaseTX> port 0x1ffff00-0x1ffff7f mem 0x7f5df00-0x7f5df7f at device 5.0 on pci0
dc1: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1ffff00
miibus1: <MII bus> on dc1
dcphy1: <Intel 21143 NWAY media interface> on miibus1
dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: bpf attached
dc1: Ethernet address: 08:00:2b:c5:18:cd
dc1: interrupting at IRQ 0xc (vec 0xc40)
dc1: [GIANT-LOCKED]
pcib1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
pcib1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci1: <PCI bus> on pcib1
pci1: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x15
bus=0, slot=1, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 01ffed00, size 7, enabled
map[14]: type 1, range 32, base 07c9df00, size 7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
bus=0, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01ffee00, size 8, enabled
map[14]: type 1, range 32, base 07c9e000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01ffef00, size 8, enabled
map[14]: type 1, range 32, base 07c9f000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0xb154, revid=0x00
bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
eisab0: <PCI-EISA bridge> at device 1.0 on pci1
eisa0: <EISA bus> on eisab0
mainboard0: <DEC6400 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
dc2: <Intel 21143 10/100BaseTX> port 0x1ffed00-0x1ffed7f mem 0x7c9df00-0x7c9df7f at device 2.0 on pci1
dc2: Reserved 0x80 bytes for rid 0x10 type 4 at 0x1ffed00
miibus2: <MII bus> on dc2
dcphy2: <Intel 21143 NWAY media interface> on miibus2
dcphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: bpf attached
dc2: Ethernet address: 08:00:2b:c5:03:a4
dc2: interrupting at IRQ 0x0 (vec 0x980)
dc2: [GIANT-LOCKED]
isp2: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffee00-0x1ffeeff mem 0x7c9e000-0x7c9efff at device 3.0 on pci1
isp2: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x7c9e000
isp2: using Memory space register mapping
isp2: interrupting at IRQ 0x4 (vec 0x9c0)
isp2: [GIANT-LOCKED]
isp2: Differential Mode
isp2: Ultra Mode Capable
isp2: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp2: Last F/W revision was 5.57.1
isp2: 243 max I/O commands supported
isp2: Initiator ID is 6 on Channel 0
isp3: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffef00-0x1ffefff mem 0x7c9f000-0x7c9ffff at device 4.0 on pci1
isp3: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x7c9f000
isp3: using Memory space register mapping
isp3: interrupting at IRQ 0x8 (vec 0xa00)
isp3: [GIANT-LOCKED]
isp3: Ultra Mode Capable
isp3: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp3: Last F/W revision was 5.57.1
isp3: 243 max I/O commands supported
isp3: Initiator ID is 7 on Channel 0
pcib2: <PCI-PCI bridge> at device 5.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x82f0f000-0x47fffff
pcib2: memory decode 0x7d00000-0x7ffffff
pcib2: prefetched decode 0x80000000-0x7fffffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
illegal PCI extended capability offset 8265984
map[10]: type 3, range 32, base 07dfe000, size 12, enabled
pcib2: device (null) requested decoded memory range 0x7dfe000-0x7dfefff
map[14]: type 4, range 32, base 01fffe00, size 5, enabled
map[18]: type 1, range 32, base 07e00000, size 20, enabled
pcib2: device (null) requested decoded memory range 0x7e00000-0x7efffff
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=2, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=255
illegal PCI extended capability offset 8265984
map[10]: type 3, range 32, base 07dff000, size 12, enabled
pcib2: device (null) requested decoded memory range 0x7dff000-0x7dfffff
map[14]: type 4, range 32, base 01ffff00, size 5, enabled
map[18]: type 1, range 32, base 07f00000, size 20, enabled
pcib2: device (null) requested decoded memory range 0x7f00000-0x7ffffff
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=2, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=255
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x1fffe00-0x1fffe1f mem 0x7e00000-0x7efffff,0x7dfe000-0x7dfefff at device 4.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7dfe000
fxp0: using memory space register mapping
pcib2: slot 4 INTA is routed to irq 12
fxp0: PCI IDs: 8086 1229 0e11 b0dd 0005
fxp0: Dynamic Standby mode is disabled
miibus3: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus3
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:08:02:55:fc:42
fxp0: interrupting at IRQ 0xc (vec 0xa40)
fxp0: [GIANT-LOCKED]
fxp1: <Intel 82558 Pro/100 Ethernet> port 0x1ffff00-0x1ffff1f mem 0x7f00000-0x7ffffff,0x7dff000-0x7dfffff at device 5.0 on pci2
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7dff000
fxp1: using memory space register mapping
pcib2: slot 5 INTA is routed to irq 13
fxp1: PCI IDs: 8086 1229 0e11 b0dd 0005
fxp1: Dynamic Standby mode is disabled
miibus4: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:08:02:55:fc:43
fxp1: interrupting at IRQ 0xd (vec 0xa50)
fxp1: [GIANT-LOCKED]
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 466200078 Hz (firmware 467289719 Hz)
i8254 clock: 1193141 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: no video adapter found.
sc0: <System console> failed to probe on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
procfs registered
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounters tick every 0.833 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
isp0: driver initiated bus reset of bus 0
isp1: driver initiated bus reset of bus 0
isp2: driver initiated bus reset of bus 0
isp3: driver initiated bus reset of bus 0
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009c2a80
GEOM: Configure md0a, start 8192 length 4415488 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
RCM>halt
--/04w6evG8XlLl3ft
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="asv400.log"
>>>sho dev
dka0.0.0.6.0 DKA0 RZ26N 0568
dka100.1.0.6.0 DKA100 RZ28M 0568
dka400.4.0.6.0 DKA400 TEAC CD-ROM CD-532S 1.0A
dva0.0.0.0.1 DVA0
ewa0.0.0.11.0 EWA0 00-00-F8-22-E2-1B
pka0.7.0.6.0 PKA0 SCSI Bus ID 7
>>>b dka0
(boot dka0.0.0.6.0 -flags A)
block 0 of dka0.0.0.6.0 is a valid boot block
reading 15 blocks from dka0.0.0.6.0
bootstrap code read in
base = 1f2000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1e4000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Loading /boot/loader
Console: SRM firmware console
VMS PAL rev: 0x1000000010538
OSF PAL rev: 0x100000002012e
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 1.2
(root@ds10.wbnet, Mon Aug 30 03:48:06 UTC 2004)
Memory: 163840 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5b77f0+0x4d110 syms=[0x8+0x68b20+0x8+0x5564f]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000346fe0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Mon Aug 30 17:59:15 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaStation 200/400 ("Avanti")
AlphaServer 400 4/233, 233MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=0
OSF PAL rev: 0x100000002012e
real memory = 165724160 (158 MB)
avail memory = 152813568 (145 MB)
apecs0: <DECchip 21071 Core Logic chipset>
pcib0: <2107x PCI host bus adapter> on apecs0
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x82010000-0x820100ff irq 11 at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at ISA irq 11
sym0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x82010100-0x8201017f irq 5 at device 11.0 on pci0
de0: interrupting at ISA irq 5
de0: [GIANT-LOCKED]
de0: DEC 21040 [10Mb/s] pass 2.4
de0: Ethernet address: 00:00:f8:22:e2:1b
tl0: <Compaq Netelligent 10/100> port 0x10180-0x1018f irq 9 at device 12.0 on pci0
miibus0: <MII bus> on tl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI
tl0: Ethernet address: 00:80:5f:8b:e2:3b
tl0: interrupting at ISA irq 9
tl0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: interrupting at ISA irq 14
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: interrupting at ISA irq 15
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 233347817 Hz quality 0
Timecounters tick every 0.976 msec
Waiting 15 seconds for SCSI devices to settle
de0: autosense failed: cable problem?
cd0 at sym0 bus 0 target 4 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [142914 x 2048 byte records]
da0 at sym0 bus 0 target 0 lun 0
da0: <DEC RZ26N (C) DEC 0568> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 1001MB (2050860 512 byte sectors: 64H 32S/T 1001C)
da1 at sym0 bus 0 target 1 lun 0
da1: <DEC RZ28M (C) DEC 0568> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
Mounting root from ufs:/dev/da0a
--/04w6evG8XlLl3ft
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="es40.log"
P00>>>sho dev
dka0.0.0.4.1 DKA0 COMPAQ BD009122C6 B016
dka100.1.0.4.1 DKA100 COMPAQ BD018635C4 B020
dka200.2.0.4.1 DKA200 COMPAQ BD018635C4 B020
dkb0.0.0.1.0 DKB0 COMPAQ BD009122C6 B016
dkb100.1.0.1.0 DKB100 COMPAQ BD018635C4 B020
dkb200.2.0.1.0 DKB200 COMPAQ BD018635C4 B020
dqa0.0.0.15.0 DQA0 HL-DT-ST CD-ROM GCR-8480 2.11
dva0.0.0.1000.0 DVA0
mkc600.6.0.3.0 MKC600 COMPAQ SDT-9000 4.20
eia0.0.0.2004.1 EIA0 00-02-A5-89-2E-4A
eib0.0.0.2005.1 EIB0 00-02-A5-89-2E-4B
pka0.7.0.4.1 PKA0 SCSI Bus ID 7
pkb0.7.0.1.0 PKB0 SCSI Bus ID 7
pkc0.7.0.3.0 PKC0 SCSI Bus ID 7
P00>>>b dqa0
Initializing...
OpenVMS PALcode V1.98-104, Tru64 UNIX PALcode V1.92-105
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 1ae000 heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing hardware
initializing timer data structures
lowering IPL
CPU 0 speed is 667 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
Memory size 2048 MB
testing memory
...
probe I/O subsystem
probing hose 1, PCI
probing PCI-to-PCI bridge, hose 1 bus 2
bus 0, slot 4 -- pka -- NCR 53C895
bus 2, slot 4 -- eia -- DE602-AA
bus 2, slot 5 -- eib -- DE602-AA
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 1 -- pkb -- NCR 53C895
bus 0, slot 3 -- pkc -- NCR 53C895
bus 0, slot 15 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 15 -- dqb -- Acer Labs M1543C IDE
starting drivers
entering idle loop
starting console on CPU 1
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 1 speed is 667 MHz
create powerup
starting console on CPU 2
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 2 speed is 667 MHz
create powerup
starting console on CPU 3
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 3 speed is 667 MHz
create powerup
Partition 0, Memory base: 000000000, size: 080000000
initializing GCT/FRU at 1d4000
Initializing pkb pkc pka dqa dqb eia eib
Memory Testing and Configuration Status
Array Size Base Address Intlv Mode
--------- ---------- ---------------- ----------
0 2048Mb 0000000000000000 1-Way
2048 MB of System Memory
Testing the System
Testing the Disks (read only)
Testing the Network
AlphaServer ES40 Console V6.6-19, built on Nov 11 2003 at 08:40:49
CPU 0 booting
(boot dqa0.0.0.15.0 -flags A)
block 0 of dqa0.0.0.15.0 is a valid boot block
reading 409 blocks from dqa0.0.0.15.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 33200(209408)
initializing HWRPB at 2000
initializing page table at 3ff46000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4006800010162
OSF PAL rev: 0x400690002015c
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.wbnet, Mon Aug 30 03:48:07 UTC 2004)
Memory: 2097152 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5b77f0+0x4d110 syms=[0x8+0x68b20+0x8+0x5564f]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000346fe0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Mon Aug 30 17:59:15 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
ST6600
AlphaServer ES40, 666MHz
8192 byte page size, 4 processors.
CPU: EV67 (21264A) major=11 minor=14 extensions=0x307<BWX,FIX,CIX,MVI,PRECISE>
OSF PAL rev: 0x400690002015c
real memory = 2144600064 (2045 MB)
avail memory = 2088828928 (1992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
tsunami0: <21271 Core Logic chipset>
pcib0: <21271 PCI host bus adapter> on tsunami0
pci0: <PCI bus> on pcib0
sym0: <895> port 0x10000-0x100ff mem 0x1040000-0x1040fff,0x1043000-0x10430ff irq 8 at device 1.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: interrupting at TSUNAMI irq 8
sym0: [GIANT-LOCKED]
sym1: <895> port 0x10100-0x101ff mem 0x1041000-0x1041fff,0x1043100-0x10431ff irq 16 at device 3.0 on pci0
sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: interrupting at TSUNAMI irq 16
sym1: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs Aladdin UDMA33 controller> port 0x10210-0x1021f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 238 at device 15.0 on pci0
ata0: channel #0 on atapci0
ata0: interrupting at ISA irq 14
ata1: channel #1 on atapci0
ata1: interrupting at ISA irq 15
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1042000-0x1042fff irq 234 at device 19.0 on pci0
ohci0: interrupting at ISA irq 10
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
pcib1: <21271 PCI host bus adapter> on tsunami0
pci1: <PCI bus> on pcib1
sym2: <895> port 0x11000-0x110ff mem 0x1320000-0x1320fff,0x1321000-0x13210ff irq 36 at device 4.0 on pci1
sym2: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym2: open drain IRQ line driver, using on-chip SRAM
sym2: using LOAD/STORE-based firmware.
sym2: interrupting at TSUNAMI irq 36
sym2: [GIANT-LOCKED]
pcib2: <PCI-PCI bridge> at device 5.0 on pci1
pci2: <PCI bus> on pcib2
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x10000-0x1001f mem 0x1000000-0x10fffff,0x1200000-0x1200fff irq 40 at device 4.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:a5:89:2e:4a
fxp0: interrupting at TSUNAMI irq 40
fxp0: [GIANT-LOCKED]
fxp1: <Intel 82558 Pro/100 Ethernet> port 0x10020-0x1003f mem 0x1100000-0x11fffff,0x1201000-0x1201fff irq 41 at device 5.0 on pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:02:a5:89:2e:4b
fxp1: interrupting at TSUNAMI irq 41
fxp1: [GIANT-LOCKED]
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounters tick every 0.976 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009c2a80
ATAPI_RESET time = 140us
acd0: CDROM <HL-DT-ST CD-ROM GCR-8480B/2.11> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym2:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS mode change from SE to SE.
sa0 at sym1 bus 0 target 6 lun 0
sa0: <COMPAQ SDT-9000 4.20> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BD009122C6 B016> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BD018635C4 B020> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da2 at sym0 bus 0 target 2 lun 0
da2: <COMPAQ BD018635C4 B020> Fixed Direct Access SCSI-2 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da3 at sym2 bus 0 target 0 lun 0
da3: <COMPAQ BD009122C6 B016> Fixed Direct Access SCSI-2 device
da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da3: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da4 at sym2 bus 0 target 1 lun 0
da4: <COMPAQ BD018635C4 B020> Fixed Direct Access SCSI-2 device
da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da4: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da5 at sym2 bus 0 target 2 lun 0
da5: <COMPAQ BD018635C4 B020> Fixed Direct Access SCSI-2 device
da5: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da5: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/md0
WARNING: clock lost 17533 days -- CHECK AND RESET THE DATE!
/stand/sysinstall running as init on serial console
--/04w6evG8XlLl3ft--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040901082845.GA60151>