Date: Tue, 5 Oct 2004 01:02:08 -0400 (EDT) From: parv@pair.com To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/72344: QUIRK: Dane-Elec zMate 512 MB USB flash drive (PNY USB DISK Pro) Message-ID: <20041005050208.3720E5A1A@default.chvlva.adelphia.net> Resent-Message-ID: <200410050500.i9550kaY089678@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72344 >Category: kern >Synopsis: QUIRK: Dane-Elec zMate 512 MB USB flash drive (PNY USB DISK Pro) >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue Oct 05 05:00:46 GMT 2004 >Closed-Date: >Last-Modified: >Originator: parv >Release: FreeBSD 4.10-RELEASE-p3 i386 >Organization: >Environment: Non-regular kernel configuration wrt USB and SCSI ... device atapicam # burncd(1) doesn't in FreeBSD 4.10-p2 options USB_DEBUG >Description: Add a QUIRK for "Dane-Elec zMate 512 MB USB flash drive" which is identified as listed below. BEFORE ADDING THE QUIRK ----------------------- INSERTION --------- umass0: PNY USB DISK Pro, rev 2.00/0.02, addr 2 (da0:umass-sim0:0:0:0): got CAM status 0x4 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry DEV LIST -------- # usbd -d -v usbd: device-detach event at 1096930120.119438000, product 0x1420, PNY: vndr=0x0d7d prdct=0x1420 rlse=0x0002 clss=0x0000 subclss=0x0000 prtcl=0x0000 # camcontrol devlist -v scbus0 on ata0 bus 0: < > at scbus0 target -1 lun -1 () scbus1 on ata1 bus 0: < > at scbus1 target -1 lun -1 () scbus2 on umass-sim0 bus 0: < USB DISK Pro 1.08> at scbus2 target 0 lun 0 (pass0) scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) REMOVAL ------- umass0: at uhub0 port 1 (addr 2) disconnected umass0: detached AFTER ADDING THE QUIRK (listed elsewhere) ----------------------------------------- INSERTION --------- # dmesg | egrep -i 'uhci|usb|da0|pass0|scsi' uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 umass0: PNY USB DISK Pro, rev 2.00/0.02, addr 2, SCSI over Bulk-Only Creating DISK da0 pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: < USB DISK Pro 1.08> Removable Direct Access SCSI-0 device pass0: Serial Number \^_ pass0: 650KB/s transfers da0 at umass-sim0 bus 0 target 0 lun 0 da0: < USB DISK Pro 1.08> Removable Direct Access SCSI-0 device da0: Serial Number \^_ da0: 650KB/s transfers da0: 494MB (1012736 512 byte sectors: 64H 32S/T 494C) # camcontrol inquiry da0 pass0: < USB DISK Pro 1.08> Removable Direct Access SCSI-0 device pass0: Serial Number pass0: 650KB/s transfers # camcontrol devlist -v scbus0 on umass-sim0 bus 0: < USB DISK Pro 1.08> at scbus0 target 0 lun 0 (pass0,da0) scbus1 on ata0 bus 0: < > at scbus1 target -1 lun -1 () scbus2 on ata1 bus 0: < > at scbus2 target -1 lun -1 () scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) # usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, power 200 mA, config 1, USB DISK Pro(0x1420), PNY(0x0d7d), rev 0.02 port 2 powered REMOVAL ------- umass0: at uhub0 port 1 (addr 2) disconnected (pass0:umass-sim0:0:0:0): lost device (pass0:umass-sim0:0:0:0): removing device entry (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry umass0: detached REINSERTION ----------- umass0: PNY USB DISK Pro, rev 2.00/0.02, addr 2, SCSI over Bulk-Only umass0:0:0:-1: Attached to scbus0 as device 0 pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: < USB DISK Pro 1.08> Removable Direct Access SCSI-0 device pass0: Serial Number pass0: 650KB/s transfers Creating DISK da0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: < USB DISK Pro 1.08> Removable Direct Access SCSI-0 device da0: Serial Number da0: 650KB/s transfers da0: 494MB (1012736 512 byte sectors: 64H 32S/T 494C) The patch is based on... http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/65436 ...which adds support for "256MB PNY Attache USB 2.0 Flash Drive". Purpose of this "QUIRK"/patch is mainly and only to add an identifier for the Dane-Elec 512 MB USB flash drive to make it usable. >How-To-Repeat: On FreeBSD 4.10-p3, install the kernel with all the necessary/standard USB/SCSI options. Insert above mentioned device; see the kernel messages. (After applying the patch AND before recompiling the kernel, run "cd /sys/dev/usb && make -f Makefile.usbdevs" as usbdevs(_data).h are/were not generated with only a kernel build even after (re)moving them.) >Fix: --- /sys/cam/scsi/scsi_da.c.orig Mon Oct 4 19:03:33 2004 +++ /sys/cam/scsi/scsi_da.c Mon Oct 4 19:11:37 2004 @@ -310,6 +310,15 @@ {T_DIRECT, SIP_MEDIA_REMOVABLE, "SigmaTel", "MSCN", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT }, + { + /* + * Dane-Elec USB 2.0 512 MB flash drive + * based on PR kern/65436, PNY Attache 256MB USB 2.0 Flash + * Drive, opened by Peter D Quilty <pdquilty@adelphia.net> + */ + {T_DIRECT, SIP_MEDIA_REMOVABLE, "*", "USB DISK*", "*"}, + /*quirks*/ DA_Q_NO_SYNC_CACHE + }, }; static d_open_t daopen; --- /sys/dev/usb/usbdevs.orig Mon Oct 4 18:50:40 2004 +++ /sys/dev/usb/usbdevs Mon Oct 4 19:47:10 2004 @@ -1074,6 +1074,7 @@ /* PNY products */ product PNY ATTACHE 0x1300 USB 2.0 Flash Drive +product PNY DISKPRO512 0x1420 USB 2.0 Flash Drive (DANE-ELEC zMate 512MB USB flash drive) /* Primax products */ product PRIMAX G2X300 0x0300 G2-200 scanner --- /sys/dev/usb/umass.c.orig Mon Oct 4 18:54:47 2004 +++ /sys/dev/usb/umass.c Mon Oct 4 19:30:52 2004 @@ -739,7 +739,8 @@ sc->quirks |= NO_TEST_UNIT_READY; } if (UGETW(dd->idVendor) == USB_VENDOR_PNY && - UGETW(dd->idProduct) == USB_PRODUCT_PNY_ATTACHE) { + (UGETW(dd->idProduct) == USB_PRODUCT_PNY_ATTACHE || + UGETW(dd->idProduct) == USB_PRODUCT_PNY_DISKPRO512)) { sc->proto = UMASS_PROTO_SCSI | UMASS_PROTO_BBB; sc->quirks |= IGNORE_RESIDUE; } >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041005050208.3720E5A1A>