Date: Tue, 21 Oct 2003 23:21:29 +0200 (CEST) From: Simun Mikecin <sime@logos.hr> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/58353: Can't burn DVD media with Pioneer DVR-106 burner Message-ID: <20031021212129.9A5701B04A@data.home.hr> Resent-Message-ID: <200310212130.h9LLU9d9048908@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 58353 >Category: kern >Synopsis: Can't burn DVD media with Pioneer DVR-106 burner >Confidential: no >Severity: critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Oct 21 14:30:08 PDT 2003 >Closed-Date: >Last-Modified: >Originator: Simun Mikecin >Release: FreeBSD 5.1-CURRENT i386 >Organization: >Environment: System: FreeBSD data.home.hr 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Sun Oct 19 19:55:19 CEST 2003 root@data.home.hr:/usr/obj/usr/src/sys/DATA i386 Using 5.1-CURRENT as of Oct 19 2003 on Pentium4 machine. Kernel compiled with SMP+APIC and atapicam. Hyperthreading logical processors disabled (default). This is dmesg output: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Sun Oct 19 19:55:19 CEST 2003 root@data.home.hr:/usr/obj/usr/src/sys/DATA Preloaded elf kernel "/boot/kernel/kernel" at 0xc0842000. Preloaded elf module "/boot/kernel/agp.ko" at 0xc08421f4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc084229c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2411.60-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073676288 (1023 MB) avail memory = 1033490432 (985 MB) Changing APIC ID for IO APIC #0 from 0 to 2 on chip Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 netsmb_dev: loaded Pentium Pro MTRR support enabled VESA: v3.0, 131072k memory, flags:0x1, mode table:0xc07563e2 (1000022) VESA: NVIDIA npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <GBT AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 15 entries at 0xc00fceb0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x1000-0x10bf,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 IOAPIC #0 intpin 16 -> irq 2 IOAPIC #0 intpin 19 -> irq 3 IOAPIC #0 intpin 18 -> irq 9 IOAPIC #0 intpin 23 -> irq 10 IOAPIC #0 intpin 17 -> irq 11 agp0: <Intel 82875P host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xb000-0xb01f mem 0xf4000000-0xf401ffff irq 9 at device 1.0 on pci2 em0: [MPSAFE] em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 2 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 3 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 9 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 2 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4200000-0xf42003ff irq 10 at device 29.7 on pci0 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 IOAPIC #0 intpin 21 -> irq 16 IOAPIC #0 intpin 22 -> irq 17 bktr0: <BrookTree 878> mem 0xf4100000-0xf4100fff irq 16 at device 1.0 on pci3 bktr0: Hauppauge Model 44354 A321 bktr0: Detected a MSP3415D-B3 at 0x80 bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control. pci3: <multimedia> at device 1.1 (no driver attached) pci3: <multimedia, audio> at device 2.0 (no driver attached) pci3: <input device> at device 2.1 (no driver attached) xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x7800-0x787f mem 0xf3006000-0xf300607f irq 2 at device 3.0 on pci3 xl0: Ethernet address: 00:01:02:55:db:f0 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0x7c00-0x7cff mem 0xf3004000-0xf3004fff irq 9 at device 4.0 on pci3 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 2 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x1400-0x141f irq 11 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 speaker0 port 0x61 on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% GEOM: create disk ad0 dp=0xc6970970 ad0: 176700MB <IC35L180AVV207-1> [359010/16/63] at ata0-master UDMA100 acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-120S> at ata0-slave UDMA66 (probe1:ata0:0:1:0): Recovered Sense (probe1:ata0:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe1:ata0:0:1:0): CAM Status: SCSI Status Error (probe1:ata0:0:1:0): SCSI Status: Check Condition (probe1:ata0:0:1:0): ILLEGAL REQUEST asc:24,0 (probe1:ata0:0:1:0): Invalid field in CDB acd1: DVDR <PIONEER DVD-RW DVR-106D> at ata1-master UDMA33 (probe18:ata0:0:1:0): Recovered Sense (probe18:ata0:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe18:ata0:0:1:0): CAM Status: SCSI Status Error (probe18:ata0:0:1:0): SCSI Status: Check Condition (probe18:ata0:0:1:0): ILLEGAL REQUEST asc:24,0 (probe18:ata0:0:1:0): Invalid field in CDB (probe0:ata1:0:0:0): Recovered Sense (probe0:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe0:ata1:0:0:0): Invalid field in CDB: Command byte 1 bit 0 is invalid (probe0:ata1:0:0:0): Recovered Sense (probe0:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe0:ata1:0:0:0): Invalid field in CDB: Command byte 1 bit 0 is invalid GEOM: create disk cd0 dp=0xc6947600 GEOM: create disk cd1 dp=0xc6946e00 GEOM: create disk da0 dp=0xc696cc50 da0 at ahc0 bus 0 target 6 lun 0 da0: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) SMP: AP CPU #1 Launched! (cd0:ata0:0:1:0): Recovered Sense (cd0:ata0:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:1:0): CAM Status: SCSI Status Error (cd0:ata0:0:1:0): SCSI Status: Check Condition (cd0:ata0:0:1:0): NOT READY asc:3a,0 (cd0:ata0:0:1:0): Medium not present cd0 at ata0 bus 0 target 1 lun 0 cd0: <PIONEER DVD-ROM DVD-120S 1.01> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd1:ata1:0:0:0): Recovered Sense (cd1:ata1:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd1:ata1:0:0:0): CAM Status: SCSI Status Error (cd1:ata1:0:0:0): SCSI Status: Check Condition (cd1:ata1:0:0:0): NOT READY asc:3a,0 (cd1:ata1:0:0:0): Medium not present cd1 at ata1 bus 0 target 0 lun 0 cd1: <PIONEER DVD-RW DVR-106D 1.07> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present (cd1:ata1:0:0:0): Recovered Sense (cd1:ata1:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 (cd1:ata1:0:0:0): CAM Status: SCSI Status Error (cd1:ata1:0:0:0): SCSI Status: Check Condition (cd1:ata1:0:0:0): NOT READY asc:3a,0 (cd1:ata1:0:0:0): Medium not present (cd1:ata1:0:0:0): Recovered Sense (cd1:ata1:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 (cd1:ata1:0:0:0): CAM Status: SCSI Status Error (cd1:ata1:0:0:0): SCSI Status: Check Condition (cd1:ata1:0:0:0): NOT READY asc:3a,0 (cd1:ata1:0:0:0): Medium not present Mounting root from ufs:/dev/ad0s1a pcm0: <Creative EMU10K1> port 0x7000-0x701f irq 17 at device 2.0 on pci3 pcm0: <SigmaTel STAC9708/11 AC97 Codec> nvidia0: <GeForce4 Ti 4800 SE> mem 0xe8000000-0xefffffff,0xf0000000-0xf0ffffff irq 2 at device 0.0 on pci1 WARNING: driver "rtc" used unreserved major device number 202 WARNING: driver "vmmon" used unreserved major device number 200 /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570+ $ /dev/vmmon: Module vmmon: initialized em0: promiscuous mode enabled vmnet1: promiscuous mode enabled Warning: pid 826 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 982 used static ldt allocation. See the i386_set_ldt man page for more info em0: Link is up 100 Mbps Full Duplex em0: Link is Down em0: Link is up 100 Mbps Full Duplex Warning: pid 1032 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1144 used static ldt allocation. See the i386_set_ldt man page for more info >Description: Burning DVD+RW media using sysutils/dvd+rw-tools port (dvd+rw-tools-5.12.4.7.4_1) ends successfully if I try to burn a file 1500 bytes long: # growisofs -Z /dev/cd1 -r -J small.txt WARNING: /dev/cd1 already carries isofs! About to execute 'mkisofs -r -J /etc/make.conf | builtin_dd of=/dev/pass2 obs=32k seek=0' Total translation table size: 0 Total rockridge attributes bytes: 250 Total directory bytes: 0 Path table size(bytes): 10 /dev/pass2: "Current Write Speed" is 2.4x1385KBps. Max brk space used e7c4 48 extents written (0 Mb) /dev/pass2: flushing cache /dev/pass2: stopping de-icing /dev/pass2: writing lead-out But if I try a large file (180MB) it doesn't burn: # growisofs -Z /dev/cd1 -r -J large.dat WARNING: /dev/cd1 already carries isofs! About to execute 'mkisofs -r -J sol-8-u5-ia-v2.iso | builtin_dd of=/dev/pass2 obs=32k seek=0' /dev/pass2: "Current Write Speed" is 2.4x1385KBps. :-[ LBA=310h, SENSE KEY=Fh/ASC=FFh/ASCQ=FFh ] :-( write failed: Input/output error /dev/pass2: flushing cache /dev/pass2: stopping de-icing /dev/pass2: writing lead-out While doing that I get this in dmesg: (cd1:ata1:0:0:0): Recovered Sense (cd1:ata1:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 (cd1:ata1:0:0:0): CAM Status: SCSI Status Error (cd1:ata1:0:0:0): SCSI Status: Check Condition (cd1:ata1:0:0:0): UNIT ATTENTION asc:28,0 (cd1:ata1:0:0:0): Not ready to ready change, medium may have changed DVD+RW Media that I'm burning is already fully formated: # dvd+rw-mediainfo /dev/cd1 INQUIRY: [PIONEER ][DVD-RW DVR-106D][1.07] GET [CURRENT] CONFIGURATION: Mounted Media: 1Ah, DVD+RW Current Write Speed: 2.4x1385=3324KB/s Write Speed #0: 2.4x1385=3324KB/s READ DVD STRUCTURE[#0h]: Media Book Type: 92h, DVD+RW book [revision 2] Legacy lead-out at: 2295104*2KB=4700372992 READ DISC INFORMATION: Disc status: complete Number of Sessions: 1 State of Last Session: complete Number of Tracks: 1 BG Format Status: complete READ TRACK INFORMATION[#1]: Track State: complete Track Start Address: 0*2KB Free Blocks: 0*2KB Track Size: 2295104*2KB FABRICATED TOC: Track#1 : 14@0 Track#AA : 14@2295104 Multi-session Info: #1@0 I haven't tried other types of DVD media (DVD-RW,DVD-R or DVD+R). DVD+R and DVD-R media is too expensive to make a try, and I suspect it will not work as long as DVD+RW writing is not working. Burning DVD media with growisofs (sysutils/dvd+rwtools) worked before ATAng commit, so I conclude it's an ATAng bug, not a dvd+rw-tools bug. >How-To-Repeat: try to burn DVD+RW media using growisofs (sysutils/dvd+rw-tools port) >Fix: None that I know of. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031021212129.9A5701B04A>