From owner-freebsd-questions Mon May 24 17:12:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.cybcon.com (mail.cybcon.com [205.147.64.46]) by hub.freebsd.org (Postfix) with ESMTP id 61B4715038 for ; Mon, 24 May 1999 17:11:57 -0700 (PDT) (envelope-from wwoods@cybcon.com) Received: from william (usr1-23.cybcon.com [205.147.75.24]) by mail.cybcon.com (8.9.0/8.9.0) with SMTP id RAA23057 for ; Mon, 24 May 1999 17:11:54 -0700 (PDT) From: "William Woods" To: "FreeBSD Questions" Subject: ps/2 mouse woes....... Date: Mon, 24 May 1999 17:11:50 -0700 Message-ID: <000101bea643$2f5fcde0$184b93cd@william> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG OK, I am getting just a little lit at this laptop. FreeBSD mobile.cybcon.com 3.2-STABLE FreeBSD 3.2-STABLE #0: Mon May 24 15:13:14 PDT 1999 root@mobile.cybcon.com:/usr/src/sys/compile/mobile i386 It is a toshiba Satelite, I have the ps/2 mouse enabled in the bios, I have the psm0 device in the kernel config, here is the realivant section of the kernel config: # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 options PSM_HOOKAPM options PSM_RESETAFTERSUSPEND here is the dmesg on that same kerenel regarding psm0: psm0 not found And also, in /dev/ there is no psm0 either....... --------------------------------------------------------------------- Below, you will find the entire kernel config: ---------------------------------------------------------------------- # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident WILLIAM maxusers 128 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 options PSM_HOOKAPM options PSM_RESETAFTERSUSPEND device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? # PCCARD (PCMCIA) support controller card0 device pcic0 at card? device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 #device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) device mx0 # Macronix 98713/98715/98725 (``PMAC'') device pn0 # Lite-On 82c168/82c169 (``PNIC'') device rl0 # RealTek 8129/8139 device tl0 # Texas Instruments ThunderLAN device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II device vx0 # 3Com 3c590, 3c595 (``Vortex'') device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 4 #Berkeley packet filter # Softupdates options SOFTUPDATES # Firewall options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPFIREWALL_DEFAULT_TO_ACCEPT options "ICMP_BANDLIM" ---------------------------------------------------------------- And here is the dmesg ----------------------------------------------------------------- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-STABLE #0: Mon May 24 15:13:14 PDT 1999 root@mobile.cybcon.com:/usr/src/sys/compile/mobile Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P54C (99.95-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 42139648 (41152K bytes) avail memory = 37351424 (36476K bytes) Preloaded elf kernel "kernel" at 0xc0378000. Preloaded elf module "splash_bmp.ko" at 0xc037809c. Preloaded splash_image_data "/boot/splash.bmp" at 0xc0378140. Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 fe0 not found at 0x300 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 1295MB (2654064 sectors), 2633 cyls, 16 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 ie0: unknown board_id: f000 ie0 not found at 0x300 ep0 not found at 0x300 ex0 not found le0 not found at 0x300 lnc0 not found at 0x280 cs0 not found at 0x300 adv0 not found at 0x330 bt_isa_probe: Probe failed for card at 0x330 bt_isa_probe: Probe failed for card at 0x334 bt_isa_probe: Probe failed for card at 0x230 bt_isa_probe: Probe failed for card at 0x234 bt_isa_probe: Probe failed for card at 0x130 bt_isa_probe: Probe failed for card at 0x134 bt0 not found at 0x134 aha0 not found at 0x134 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.1 PC-Card Intel 82365 (5 mem & 2 I/O windows) pcic: controller irq 3 Initializing PC-card drivers: sio fe ep ed Intel Pentium detected, installing workaround for F00F bug IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry changing root device to wd0s1a ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates -------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message