From owner-freebsd-hackers Wed Sep 1 16: 2:38 1999 Delivered-To: freebsd-hackers@freebsd.org Received: from tahiti.oss.uswest.net (tahiti.oss.uswest.net [204.147.85.151]) by hub.freebsd.org (Postfix) with ESMTP id 3FE3F155A6 for ; Wed, 1 Sep 1999 16:02:28 -0700 (PDT) (envelope-from pmckenna@uswest.net) Received: from uswest.net (otto.oss.uswest.net [204.147.85.81]) by tahiti.oss.uswest.net (8.9.2/8.9.2) with ESMTP id RAA78086; Wed, 1 Sep 1999 17:59:58 -0500 (CDT) (envelope-from pmckenna@uswest.net) Message-ID: <37CDB067.CA42C6FE@uswest.net> Date: Wed, 01 Sep 1999 18:01:59 -0500 From: Pete Mckenna X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 3.2-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Luiz Morte da Costa Junior Cc: Kevin Lynn , freebsd-hackers@freebsd.org Subject: Re: L440GX+ Server Board References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Luiz Morte da Costa Junior wrote: > > Hi Pete and All, > > On Wed, 1 Sep 1999, Pete Mckenna wrote: > > > We have a few dozen running mostly as uniprocesser boxes. > > Ok. My server has 2 processors. I supose that you have some servers with 2 > processors. I think just one that I used to determine it would work. > > > I have also put an adaptec 2940 in them and it works as well. > > What is the adaptec transfer rate? I have tested with a adaptec 80Mb, and > it didn't work too. The chipset is the same the AIC 7896. I'm not sure what you are asking. I havn't put an Adaptec 7896 into this motherboard, just added a 2940 to the built in 7896 and didn't have any problems. We use LVD drives on the A or 0 channel and they need external termination. I don't have transfer rate numbers handy but could generate some if that's what your asking ? > > > You need to run 3.2 or better to get the drivers for the on board > > Adaptec. > > I have downloaded (with CVSup) to stable version, but I have the same > problem. I have about 10.000 users in my master.passwd. When I runnig the > vipw, my machine stay down (I can't send any e-mail, when I have the > problem). > > Another test that I have done with my kernel was to put the flags below: This only refers to IDE drives not SCSI drives. We don't use anything other than SCSI in these boxes. Which are you using ? > > controller wdc0 at isa? port "IO_WD1" bio irq 14 > disk wd0 at wdc0 drive 0 flags 0xb0ff > disk wd1 at wdc0 drive 1 flags 0xb0ff > controller wdc1 at isa? port "IO_WD2" bio irq 15 > disk wd2 at wdc1 drive 0 flags 0xb0ff > disk wd3 at wdc1 drive 1 flags 0xb0ff > > It didn't work too. > > > The onboard NIC works like any other Intel 10/100 using fxp0, adding a > > asecond nic makes the onboard fxp1 (for failover purposes, I assume) > > I think that I don't have problem with my NIC (Intel 10/100). > > > We like them, and are trying to get Intel to make the reporting of temp > > etc and power managment Unix friendly. You can get to the bios at boot > > time (remotely via a com port) as it is which is nice. > > I can't figured out what you want to say about BIOS :/ These board have some remote managment capabilities that let you see the early ( pre -FreeBSD ) boot stuff like ram count, acess to the bois, and the Adaptec bios. etc Pete > > Thanks in advance. > > []s, > > Luiz Morte da Costa Junior > Analista de Redes E-mail: morte@correionet.com.br > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > CorreioNet - Correio Popular Campinas - SP - Brazil > > > Pete > > > > Kevin Lynn wrote: > > > > > > Has anyone else gotten this server board to work? > > > > > > I've got an N440BX and have been considering getting the L440GX+ but > > > haven't because I don't know if it works.. > > > > > > Kevin > > > > > > On Mon, 23 Aug 1999, Luiz Morte da Costa Junior wrote: > > > > > > > > > > > Hi list, > > > > > > > > About the problem bellow, I bought a 2940 Adaptec Ultra2 Wide SCSI > > > > controller, but it didn't work too. > > > > > > > > I wrote to Justin T. Gibbs and he told me that my problem is not SCSI. > > > > > > > > Somebody has any idea? > > > > > > > > []s, > > > > > > > > Luiz Morte da Costa Junior > > > > Analista de Redes E-mail: morte@correionet.com.br > > > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > > > > CorreioNet - Correio Popular Campinas - SP - Brazil > > > > > > > > > > > > On Sun, 22 Aug 1999, Luiz Morte da Costa Junior wrote: > > > > > > > > > > > > > > Hi all, > > > > > > > > > > I have a problem with a server running a FreeBSD 3.2. > > > > > > > > > > My Server has a L440GX+ Serber Board (intel), with network card 10/100, > > > > > SCSI AIC 7896 (80MB/s), 2 SCSI disk with 9GB (80MB/s), 2 pentium III > > > > > 450Mhz (not overclocked). The NIC and SCSI are onboard. > > > > > > > > > > I recompiled a kernel to SMP, and it worked. The server is ok, but when I > > > > > run a comand with disk access (whith vipw or mysql), the performance of > > > > > server goes down. My server stays very very very slow. If I use pine to > > > > > read my messages, it doesn't work. When the comand finishes, the server > > > > > stays "ok" again. > > > > > > > > > > I recompiled the kernel with "maxusers 128", but it doesn't work. > > > > > > > > > > My SCSI cable has a terminator and the scsi setup is ok (I think :) ). > > > > > > > > > > The dmesg command output is in attchmnt. > > > > > > > > > > I appreciate any help. > > > > > > > > > > []s, > > > > > > > > > > Luiz Morte da Costa Junior > > > > > Analista de Redes E-mail: morte@correionet.com.br > > > > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > > > > > CorreioNet - Correio Popular Campinas - SP - Brazil > > > > > > > > > > > > > []s, > > > > > > > > Luiz Morte da Costa Junior > > > > Analista de Redes E-mail: morte@correionet.com.br > > > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > > > > CorreioNet - Correio Popular Campinas - SP - Brazil > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-hackers" in the body of the message > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-hackers" in the body of the message > > > > []s, > > Luiz Morte da Costa Junior > Analista de Redes E-mail: morte@correionet.com.br > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > CorreioNet - Correio Popular Campinas - SP - Brazil > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hackers" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message