Date: Fri, 9 Feb 2001 20:57:03 +0100 (CET) From: =?ISO-8859-1?Q?G=E9rard_Roudier?= <groudier@club-internet.fr> To: dwmalone@FreeBSD.ORG Cc: freebsd-bugs@FreeBSD.ORG Subject: Re: kern/10641: Default sync rate in ncr SCSI driver is slower than Ultra2 allows Message-ID: <Pine.LNX.4.10.10102092013100.1451-100000@linux.local> In-Reply-To: <200102091330.f19DUaf61242@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 9 Feb 2001 dwmalone@FreeBSD.ORG wrote:
> Synopsis: Default sync rate in ncr SCSI driver is slower than Ultra2 allo=
ws
>=20
> Responsible-Changed-From-To: freebsd-bugs->groudier
> Responsible-Changed-By: dwmalone
> Responsible-Changed-When: Fri Feb 9 05:27:15 PST 2001
> Responsible-Changed-Why:=20
> I know that Gerard looks after the sym driver, not the ncr driver, but
> he is likely to be able to check this simple patch quickly.
>=20
> Gerard - could you cast your eye over the patch (which changed
> SCSI_NCR_DFLT_SYNC from 6 to 12) and one of us can commit it, it if
> looks OK.
You want to use 10 instead as default sync value for ULTRA2 negotiation
to be possible.
- 12 -> 20 Mega-transfers per second
- 11 -> about 33
- 10 -> 40 Mega-blah... -> 80 MB/s in 16 bit Wide mode
Note that SCSI_NCR_DFLT_SYNC was intended to be a default value but not a
minimal value, allowing faster speed to be negotiated after boot through
appropriate user commands. But it seems that the ncr may also checks
against a copy of this value when receiving a SDTR message and thus may
turn this default into min. As a result, using camcontrol after boot=20
may not allow to negotiate Ultra2.
Hmmm... I seem to remember that the ncr behaved correctly regarding this
default sync option before CAM introduction. ??
G=E9rard.
PS: My recommendation for FreeBSD-3.X (X>=3D3) and later versions would be
sym-2.1.6, currently beta due to the Linux support, but that may well be
very solid under FreeBSD given that it is mostly a repackaging of sym for
portability concern. At user's own risk, obviously, since I didn't try
this latest driver version under FreeBSD-3.X.
ftp://ftp.tux.org/roudier/drivers/portable/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.10102092013100.1451-100000>