Date: Sun, 26 Jun 2005 18:01:29 GMT From: Sebastian Koehler <acex5@syncer.de> To: freebsd-gnats-submit@FreeBSD.org Subject: sparc64/82681: dc state messages Message-ID: <200506261801.j5QI1TFl086122@www.freebsd.org> Resent-Message-ID: <200506261810.j5QIA8uu088722@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 82681 >Category: sparc64 >Synopsis: dc state messages >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-sparc64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jun 26 18:10:08 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Sebastian Koehler >Release: 6.0-CURRENT >Organization: >Environment: FreeBSD sunshine.thrillkill.lan 6.0-CURRENT FreeBSD 6.0-CURRENT #2: Sun Jun 26 17:37:30 CEST 2005 root@sunshine.thrillkill.lan:/usr/obj/usr/src/sys/GENERIC sparc64 >Description: Running FreeBSD 6.0-CURRENT on a Sun Netra X1. ifconfig up on a dc onboard NIC (Davicom DM9102A) cause system to log the following events. dc0: failed to force tx and rx to idle state dc0: failed to force tx and rx to idle state Network connectivity works fine, but these messages confuse me a little. sunshine# dmesg GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #2: Sun Jun 26 17:37:30 CEST 2005 root@sunshine.thrillkill.lan:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "tick" frequency 500000000 Hz quality 1000 real memory = 536870912 (512 MB) avail memory = 505470976 (482 MB) cpu0: Sun Microsystems UltraSparc-IIe Processor (500.00 MHz CPU) nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0 dvma: DVMA map: 0x60000000 to 0x63ffffff pci0: <OFW PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <old, non-VGA display device> at device 3.0 (no driver attached) pci0: <old, non-VGA display device> at device 3.0 (no driver attached) dc0: <Davicom DM9102A 10/100BaseTX> port 0x10000-0x100ff at device 12.0 on pci0 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:03:ba:0f:22:55 dc0: if_start running deferred for Giant dc0: [GIANT-LOCKED] dc1: <Davicom DM9102A 10/100BaseTX> port 0x10100-0x101ff mem 0x2000-0x20ff at device 5.0 on pci0 miibus1: <MII bus> on dc1 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: Ethernet address: 00:03:ba:0f:22:55 dc1: if_start running deferred for Giant dc1: [GIANT-LOCKED] ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at device 10.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered atapci0: <AcerLabs M5229 UDMA66 controller> port 0x10200-0x10207,0x10218-0x1021b,0x10210-0x10217,0x10208-0x1020b,0x10220-0x1022f at device 13.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 nexus0: <syscons>, type (unknown) (no driver attached) rtc0: <Real Time Clock> at port 0x70-0x71 on isa0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 on isa0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 on isa0 Timecounters tick every 1.000 msec ad0: 38166MB <Seagate ST340824A 3.28> at ata2-master PIO4 Trying to mount root from ufs:/dev/ad0a dc0: failed to force tx and rx to idle state dc0: failed to force tx and rx to idle state dc0: failed to force tx and rx to idle state dc0: failed to force tx and rx to idle state dc1: failed to force tx and rx to idle state dc1: failed to force tx and rx to idle state dc1: failed to force tx and rx to idle state dc1: failed to force tx and rx to idle state >How-To-Repeat: sunshine# ifconfig dc0 down sunshine# ifconfig dc0 up >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200506261801.j5QI1TFl086122>