Date: Tue, 17 Dec 2013 08:47:45 -0500 From: Nikolai Lifanov <lifanov@mail.lifanov.com> To: dan_partelly <dan_partelly@rdsor.ro>, freebsd-current@freebsd.org Subject: Re: 10-RC2 current wireless link aggregation not working correctly Message-ID: <52B05601.3010500@mail.lifanov.com> In-Reply-To: <80a9ff942e0bf413ceaf9aa469b50687@rdsor.ro> References: <80a9ff942e0bf413ceaf9aa469b50687@rdsor.ro>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/17/13 08:06, dan_partelly wrote: > > Hi all, > > I've set up wireless link aggregation on FreeBSD 10 RC1 and RC2 as > described in the FreeBSD handbook, on an oldish Compaq nc6320 laptop. > > What happens is: > > If I boot the system with the Ethernet cable attached, I correctly get > lagg0 active port on master- bg0- and the network is working correctly. > (I mainly test pinging my gateway). When I pull the cable out, lagg0 > device correctly switches to wlan0 as shown by ifconfig (wlan0 is created > from wpi0), but at the same time I get no more ping replies from my > gateway. I can leave the system in this state for several minutes as an > example > and no replies are coming through. A simple list of interfaces with > ifconfig with no parameters brigs the network back to life, and I start to > get back the due ping replyes, this time thrugh wireless link. > > > Please, if possible en-light me on tis problem. I sat at your disposition > with any info you may deem necessary to get this fixed (if it needs a fix). > > > Dan > I can confirm this behavior. It also happens to me. - Nikolai Lifanov.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52B05601.3010500>