Date: Thu, 23 Aug 2001 11:04:21 -0700 From: Ted Faber <faber@ISI.EDU> To: Warner Losh <imp@harmony.village.org> Cc: Kevin Oberman <oberman@es.net>, Michael Collette <metrol@earthlink.net>, FreeBSD <freebsd-mobile@FreeBSD.ORG>, FreeBSD <freebsd-stable@FreeBSD.ORG> Subject: Re: IRQ Problems with Stable Message-ID: <20010823110421.E610@ted.isi.edu> In-Reply-To: <200108231601.f7NG1ZW85483@harmony.village.org>; from imp@harmony.village.org on Thu, Aug 23, 2001 at 10:01:35AM -0600 References: <200108231415.f7NEFMR21307@ptavv.es.net> <200108231601.f7NG1ZW85483@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--oplxJGu+Ee5xywIT
Content-Type: multipart/mixed; boundary="tSiBuZsJmMXpnp7T"
Content-Disposition: inline
--tSiBuZsJmMXpnp7T
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Thu, Aug 23, 2001 at 10:01:35AM -0600, Warner Losh wrote:
> In message <200108231415.f7NEFMR21307@ptavv.es.net> "Kevin Oberman" writes:
> : Warner has been putting in yoeman's service trying to get every thing
> : working but, while it's getting closer, some systems still are not
> : working right.
>
> Yes. I had it working on all my laptops but two (a pc98 one and a
> very old HP) before I MFC'd. Just goes to show that 10 laptops isn't
> enough to get good coverage.
I know I've bugged you with my laptop problems before, but I'm going
to try again. 4.4-RC cvsupped this morning, new kernel, new pccardd.
The machine's a Fujitsu Lifebook C-5130. When I insert a Linksys
PCMPC100 ethernet card the laptop freezes. ppcardd seems to allocate
it irq 9, and it used to work fine on irq 11. No matter how hard I
try, (including -I) I can't seem to convince it not to.
Here's a dmesg -v showing the boot and card insertion, the kernel
config file, and the /etc/pccard.conf . I think everything else is
recent -STABLE.
Let me know if there are things I can try or any way to help out.
And I know you're working enormously hard on the PCCARD stuff, and I
really appreciate all your work. Thanks.
--tSiBuZsJmMXpnp7T
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #42: Thu Aug 23 10:43:53 PDT 2001
root@arvon.lunabase.org:/usr/src/sys/compile/ARVON
Calibrating clock(s) ... TSC clock: 398189193 Hz, i8254 clock: 1193162 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (398.20-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67022848 (65452K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00383000 - 0x03fe2fff, 63307776 bytes (15456 pages)
avail memory = 61886464 (60436K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6900
bios32: Entry = 0xfd7d6 (c00fd7d6) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x240
pnpbios: Found PnP BIOS data at 0xc00f6850
pnpbios: Entry = f0000:b508 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f68c0
Preloaded elf kernel "kernel" at 0xc035d000.
Preloaded elf module "vesa.ko" at 0xc035d0a8.
Preloaded elf module "snd_ds1.ko" at 0xc035d144.
Preloaded elf module "snd_pcm.ko" at 0xc035d1e4.
Preloaded elf module "usb.ko" at 0xc035d284.
Preloaded elf module "ugen.ko" at 0xc035d320.
VESA: information block
56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00
00 01 40 00 00 01 0b 01 00 01 21 01 00 01 2a 01
00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01
14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01
VESA: 0 mode(s) found
module_register_init: MOD_LOAD (vesa, c0312d04, 0) error 6
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 6 entries at 0xc00fdf60
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f090, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 0000f0a0, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 0000ff80, size 4
found-> vendor=0x1073, dev=0x0010, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base fedf8000, size 15
map[14]: type 1, range 32, base 0000f0c0, size 6
map[18]: type 3, range 32, base 0000f08c, size 2
found-> vendor=0x11c1, dev=0x044a, revid=0x01
class=07-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base fedf7c00, size 8
map[14]: type 1, range 32, base 0000f080, size 3
map[18]: type 1, range 32, base 0000f400, size 8
found-> vendor=0x104c, dev=0xac1c, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=2 secondarybus=2
intpin=a, irq=9
found-> vendor=0x104c, dev=0xac1c, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=3 secondarybus=3
intpin=b, irq=9
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x1002, dev=0x4c4d, revid=0x64
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 0000e800, size 8
map[18]: type 1, range 32, base fecfe000, size 12
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> (vendor=0x1002, dev=0x4c4d) at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf090-0xf09f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf090
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf098
ata1: mask=03 status0=50 status1=01
ata1: mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=14 b=eb
ata1: mask=03 status0=00 status1=01
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xf0a0-0xf0bf irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xff80-0xff8f at device 7.3 on pci0
pcm0: <Yamaha DS-1E (YMF744)> port 0xf08c-0xf08f,0xf0c0-0xf0ff mem 0xfedf8000-0xfedfffff irq 9 at device 13.0 on pci0
ds1: setmap (11000, 3de4), nseg=1, error=0
pcm0: ac97 codec id 0x414b4d02 (Asahi Kasei AK4543)
pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM 3D Audio
using shared irq9.
pcm: setmap 21000, 1000; 0xc53eb000 -> 21000
pcm: setmap 31000, 1000; 0xc53fb000 -> 31000
pcm: setmap 41000, 1000; 0xc540b000 -> 41000
pcm: setmap 51000, 1000; 0xc541b000 -> 51000
pcm: setmap 61000, 1000; 0xc542b000 -> 61000
pcm: setmap 71000, 1000; 0xc543b000 -> 71000
pci0: <unknown card> (vendor=0x11c1, dev=0x044a) at 16.0 irq 9
pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 19.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 19.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6d 1e
24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6d 1e
24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
pcic2 failed to probe at port 0x3e0-0x3e1 irq 11 on isa0
pcic3 failed to probe at port 0x3e0-0x3e1 irq 11 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:0345ef3f 0..837=838 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: faith0 attached
bpf: stf0 attached
IPsec: Initialized Security Association Processing.
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <FUJITSU MHE2064AT/A020> ATA-4 disk at ata0-master
ad0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 6194MB <FUJITSU MHE2064AT> [13424/15/63] at ata0-master UDMA33
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <NEC CD-ROM DRIVE:282/5.04> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 12685679, size 12685617 : OK
start_init: trying /sbin/init
Linux-ELF exec handler installed
pcic1: Event mask 0x4 stat 0x30000182
pcic1: Event mask 0x4 stat 0x30000186
pcic1: Event mask 0x6 stat 0x30000510
pccard: card inserted, slot 1
pcic1: Event mask 0x9 stat 0x30000519
pccard1: Assigning ed0: io 0x300-0x31f irq 9 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 300-31f
ed0: Forcing IRQ to 9
pcic: I/O win 0 flags 5 300-31f
ed0 at port 0x300-0x31f irq 9 slot 1 on pccard1
pcic: I/O win 0 flags 15 300-31f
ed0: Forcing IRQ to 9
bpf: ed0 attached
ed0: address 00:e0:98:7c:fb:21, type Linksys (16 bit)
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled
pcic1: Event mask 0x6 stat 0x3000011f
lxtphy0: detached
miibus0: detached
pcic: I/O win 0 flags 5 300-31f
ed0: detached
pccard: card removed, slot 1
--tSiBuZsJmMXpnp7T
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=ARVON
#
# ARVON -- config for Ted's Fujitsu C-5130 Lifebook
#
machine i386
ident ARVON
maxusers 10
makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
#options ROOTDEVNAME=\"ufs:ad0s1a\"
cpu I686_CPU # aka Pentium Pro(tm)
# enable the L2 cache and disable F00F checking. Both these are probably
# unnecessary
options CPU_PPRO2CELERON
options NO_F00F_HACK
# no math emulation - we have an FPU
options COMPAT_43
options USER_LDT #allow user-level control of i386 ldt
# used by aviplay
options SYSVSHM # include support for shared memory
options SYSVSEM # include support for semaphores
options SYSVMSG # include support for message queues
options KTRACE #kernel tracing
options PERFMON
options UCONSOLE
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options INET #Internet communications protocols
options INET6 #IPv6 communications protocols
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
pseudo-device ether #Generic Ethernet
pseudo-device loop #Network loopback device
pseudo-device bpf #Berkeley packet filter
pseudo-device tun #Tunnel driver (ppp(8), nos-tun(8))
# for IPv6
pseudo-device gif 4 #IPv6 and IPv4 tunneling
pseudo-device faith 1 #for IPv6 and IPv4 translation
pseudo-device stf 1 #6to4 IPv6 over IPv4 encapsulation
options MROUTING # Multicast routing
options ICMP_BANDLIM
options FFS #Fast filesystem
options FFS_ROOT #FFS usable as root device
# This code is still experimental (e.g. doesn't handle disk slices well).
# Also, 'options MFS' is currently incompatible with DEVFS.
#options DEVFS #devices filesystem
# Soft updates is technique for improving file system speed and
# making abrupt shutdown less risky.
options SOFTUPDATES
options NSWAPDEV=1
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
pseudo-device pty #Pseudo ttys
pseudo-device speaker #Play IBM BASIC-style noises out your speaker
# Mandatory ISA devices: isa, npx
#
device isa
device eisa
device pci
device miibus
device apm0
# Enable support for the kernel PLL to use an external PPS signal,
# under supervision of [x]ntpd(8)
# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
options PPS_SYNC
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
device atkbdc0 at isa? port IO_KBD
# The AT keyboard
device atkbd0 at atkbdc? irq 1
# PS/2 mouse
device psm0 at atkbdc? irq 12
# The video card driver.
device vga0 at isa?
# To include support for VESA video modes
#options VESA
# Splash screen at start up! Screen savers require this too.
pseudo-device splash
# The syscons console driver (sco color console compatible).
device sc0 at isa?
options SC_DISABLE_REBOOT # disable reboot key sequence
options SC_PIXEL_MODE # add support for the raster text mode
# use the right button of the mouse to paste text.
options SC_TWOBUTTON_MOUSE
device npx0 at nexus? port IO_NPX flags 0x0 irq 13
#
# The 'ATA' driver supports all ATA and ATAPI devices.
# It can reuse the majors of wd.c for booting purposes.
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#
# Standard floppy disk controllers: `fdc' and `fd'
#
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device sio0 at isa? port IO_COM1 irq 4
device sio1 at isa? port IO_COM2 irq 3
#device pcm
device ed0
# card: pccard slots
# pcic: isa/pccard bridge
device pcic0 at isa? irq 11
device pcic1 at isa? irq 11
#device pcic0
#device pcic1
device card
# Parallel-Port Bus
device ppc0 at isa? irq 7
device ppbus
device lpt
device ppi
device pps
# USB support
#device uhci
#device usb
#device ugen
#device uhid
#device ukbd
#device ulpt
#device umodem
#device ums
#device uscanner
--tSiBuZsJmMXpnp7T
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="pccard.conf"
irq 11
# Cabletron RoamAbout, WaveLAN/IEEE clone
card "Cabletron" "RoamAbout 802.11 DS"
config 0x1 "wi" ?
# ISI requires the DS card to be in BSS mode
insert /usr/sbin/wicontrol -i wi0 -p 1
insert /bin/test -s /usr/local/etc/SSID && /usr/sbin/wicontrol -i wi0 -q `cat /usr/local/etc/SSID`
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
--tSiBuZsJmMXpnp7T--
--oplxJGu+Ee5xywIT
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
Comment: For info see http://www.gnupg.org
iD8DBQE7hUWlaUz3f+Zf+XsRAjrjAJ9GqwfR3EmSXrKxD+HbFsb0abSI9wCdFP/i
RFAViyZgvlu2bR6ruTVc+FY=
=bO6K
-----END PGP SIGNATURE-----
--oplxJGu+Ee5xywIT--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010823110421.E610>