Date: Tue, 11 Jul 2006 21:17:11 +0400 From: "Eugeny Kuzakov" <coredumped@coredumped.org.ru> To: "Yuriy Tsibizov" <Yuriy.Tsibizov@gfk.ru> Cc: freebsd-multimedia@freebsd.org Subject: Re: microphone doen't work:( Message-ID: <146805bd0607111017k682cc0c1wbb945b50e2e80e73@mail.gmail.com> In-Reply-To: <D6B2C454E5A77B4D8DA0B863D3D6D492CC366D@demon.hhp.local> References: <D6B2C454E5A77B4D8DA0B863D3D6D492CC366D@demon.hhp.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On 7/10/06, Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru> wrote: > > > I have Audigy 4 card inserted in Asus p4p800se. > > sound is nice, but I am unable to use microphone in any app...:( > can you post output from "emuctrl list" and "mixer"? > coredumped@coredumped:~$sudo emuctrl list Id Description Vol RecVol FX (PCM) buses fx0 DSP FX BUS 0 61:61 (100:100) DSP Inputs in0 AC97 Codec 100:100 (100:100) in2 S/PDIF 0:0 (0:0) DSP Outputs out0 Front 100:100 out1 Center 100 out2 Subwoofer 100 out4 Rear 100:100 out13 A/D converter (REC) 0:0 Main Mix mix0 Main Mix 100:100 (100:100) ---11-07-2006 21:06:44 coredumped@coredumped:~$mixer Mixer vol is currently set to 100:100 Mixer pcm is currently set to 60:60 Mixer speaker is currently set to 100:100 Mixer line is currently set to 100:100 Mixer mic is currently set to 100:100 Mixer cd is currently set to 0:0 Mixer rec is currently set to 100:100 Mixer igain is currently set to 98:98 Mixer ogain is currently set to 100:100 Mixer line1 is currently set to 73:73 Mixer phin is currently set to 0:0 Mixer phout is currently set to 0:0 Mixer video is currently set to 0:0 Recording source: mic dmesg: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #1: Sat Jul 8 16:41:59 MSD 2006 root@coredumped.local:/add/obj/add/ftp/pub/FreeBSD/STABLE/src/sys/my2 WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3519.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>> Logical CPUs per core: 2 real memory = 1073414144 (1023 MB) avail memory = 1036935168 (988 MB) ACPI APIC Table: <A M I OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nvidia0: <GeForce 6800 GT> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xeec0-0xeedf irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef00-0xef1f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef20-0xef3f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef40-0xef5f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: timed out waiting for BIOS usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered uhub5: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/6.0b, addr 2 uhub5: single transaction translator uhub5: 4 ports with 4 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 3, iclass 3/1 ums0: 8 buttons and Z dir. pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 22 at device 5.0 on pci2 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:63:5e:24 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto skc0: [GIANT-LOCKED] fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem 0xfeafb800-0xfeafbfff irq 21 at device 9.0 on pci2 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:0a:48:00:00:00:05:12 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0a:48:00:05:12 fwe0: Ethernet address: 02:0a:48:00:05:12 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) atapci0: <SiI 3112 SATA150 controller> port 0xdff0-0xdff7,0xdfe4-0xdfe7,0xdfa8-0xdfaf,0xdfe0-0xdfe3,0xdf90-0xdf9f mem 0xfeafb400-0xfeafb5ff irq 22 at device 10.0 on pci2 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 emu10kx0: <Creative Audigy 2 Value (Unknown model) [SB????]> port 0xdf00-0xdf3f irq 23 at device 11.0 on pci2 pcm0: <EMU10Kx PCM Interface> on emu10kx0 pcm0: <SigmaTel STAC9750/51 AC97 Codec> isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef90-0xef9f irq 18 at device 31.1 on pci0 ata4: <ATA channel 0> on atapci1 ata5: <ATA channel 1> on atapci1 atapci2: <Intel ICH5 SATA150 controller> port 0xefa0-0xefa7,0xef8c-0xef8f,0xef80-0xef87,0xef88-0xef8b,0xef60-0xef6f irq 18 at device 31.2 on pci0 ata6: <ATA channel 0> on atapci2 ata7: <ATA channel 1> on atapci2 ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x400-0x41f irq 17 at device 31.3 on pci0 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] speaker0: <PC speaker> port 0x61 on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd2fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ukbd0: BTC USB Multimedia Cordless Kit, rev 1.10/1.70, addr 2, iclass 3/1 kbd2 at ukbd0 uhid0: BTC USB Multimedia Cordless Kit, rev 1.10/1.70, addr 2, iclass 3/1 ugen0: vendor 0x046d Camera, rev 1.10/0.00, addr 2 ubt0: vendor 0x0db0 product 0x1967, rev 1.10/5.25, addr 2 ubt0: vendor 0x0db0 product 0x1967, rev 1.10/5.25, addr 2 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294 Timecounter "TSC" frequency 3519686464 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. ad4: 305245MB <WDC WD3200JS-00PDB0 21.00M21> at ata2-master SATA150 ad6: 286188MB <Maxtor 7V300F0 VA111630> at ata3-master SATA150 ad8: 114473MB <Seagate ST3120814A 3.AAD> at ata4-master UDMA100 ad9: 19092MB <Seagate ST320011A 7.18> at ata4-slave UDMA100 acd0: DVDR <NEC DVD RW ND-3500AG/2.16> at ata5-slave PIO4 ad12: 152627MB <Seagate ST3160023AS 3.18> at ata6-master SATA150 GEOM_LABEL: Label for provider ad8s1 is msdosfs/OT. GEOM_LABEL: Label for provider ad9s1 is ufs/otadd2. GEOM_LABEL: Label for provider ad12s1 is ntfs/ntfs. GEOM_LABEL: Label for provider ad12s4a is ufs/add. cd0 at ata5 bus 0 target 1 lun 0 cd0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad12s2a emu10kx0: IR MIDI events enabled. sk0: promiscuous mode enabled fuse4bsd: version 0.3.0, FUSE ABI 7.5 vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $ vmmon: Module vmmon: initialized vmnet1: Ethernet address: 00:bd:81:fc:03:01 vmnet1: promiscuous mode enabled ---11-07-2006 21:06:45 -- Best wishes, Coredumped.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?146805bd0607111017k682cc0c1wbb945b50e2e80e73>