Date: Fri, 16 Apr 1999 18:17:31 +0200 (MET DST) From: Christoph Weber-Fahr <listmail@helena.callcenter.systemhaus.net> To: freebsd-mobile@freebsd.org Subject: Fiberline Ethernet, part two Message-ID: <199904161617.SAA02434@helena.otelo-call.de>
next in thread | raw e-mail | index | archive | help
Hello,
some days ago I aked here about my installation troubles
with FreeBSD, various PAO boot floppies and a Fiberline Ethernet
PCMCIA card.
Well, I gave up on that and took the lp0 route.
Now I have 2.2.8-RELEASE on the Laptop in question, and can't get
the card to work, either. It is the 'driver allocation failed'
problem which hints, according to net.wisdom derived from dejanews,
to a resource conflict.
But there is none - at least I don't see it. There is no fancy=20
builtin hardware. Just Ide controller, 1 Serial, 1 Parallel, Floppy,
Keyboard, Ps2 Mouse.=20
I append a few diagnostic points - maybe someone here has an Idea.
Excerpt from dmesg, booted with -v:
------------------
FreeBSD 2.2.8-RELEASE #0: Thu Apr 15 20:28:13 CEST 1999
[...]
ed0 not found at 0x300
[...]
apm0 on isa
apm: found APM BIOS version 1.0
imasks: bio c0084040, tty c0070092, net c0070092
PC-Card Intel 82365 (5 mem & 2 I/O windows)
pcic: controller irq 3
Initializing PC-card drivers: ed sio
[...]
Card inserted, slot 0
---------------------
pccard.conf:
---------------------
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 5 10 11 13 15
# Available memory slots
memory 0xd4000 96k
#Fiberline FL-4680 Ethernet
card "Ethernet" "Adapter"
config 0x1 "ed0" ?
insert echo Fiberline Ethernet inserted
insert /etc/pccard_ether ed0
remove echo Fiberline removed
remove /sbin/ifconfig ed0 delete
---------------------
Excerpt from kernel konfig file
---------------------
controller card0
device pcic0 at card?
device pcic1 at card?
device ed0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
---------------------
pccardc dumpcis:
---------------------
Code 240 not found
Code 240 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 5
000: d4 0a 53 e9 ff
Common memory device information:
Device number 1, type Function specific, WPS =3D OFF
Speed =3D 100nS, Memory block size =3D 8Kb, 2 units
Device number 2, type FLASH EEPROM, WPS =3D OFF
Speed =3D 150nS, Memory block size =3D 2Kb, 30 units
Tuple #2, code =3D 0x17 (Attribute memory descriptor), length =3D 3
000: 53 09 ff
Attribute memory device information:
Device number 1, type FLASH EEPROM, WPS =3D OFF
Speed =3D 150nS, Memory block size =3D 2Kb, 2 units
Tuple #3, code =3D 0x20 (Manufacturer ID), length =3D 4
000: 49 01 ab c1
PCMCIA ID =3D 0x149, OEM ID =3D 0xc1ab
Tuple #4, code =3D 0x15 (Version 1 info), length =3D 26
000: 04 01 45 74 68 65 72 6e 65 74 00 41 64 61 70 74
010: 65 72 00 32 2e 30 00 ff 00 ff
Version =3D 4.1, Manuf =3D [Ethernet],card vers =3D [Adapter]
Addit. info =3D [2.0],[=FF]
Tuple #5, code =3D 0x1a (Configuration map), length =3D 5
000: 01 06 d0 0f 0b
Reg len =3D 2, config register addr =3D 0xfd0, last config =3D 0x6
Registers: XX-X----=20
Tuple #6, code =3D 0x1b (Configuration entry), length =3D 7
000: c0 81 18 45 30 fc be
Config index =3D 0x0(default)
Interface byte =3D 0x81 (I/O) wait signal supported
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes: Pulse
IRQ level =3D 5
Tuple #7, code =3D 0x1b (Configuration entry), length =3D 7
000: 01 08 ca 60 00 03 1f
Config index =3D 0x1
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start =3D 0x300 block length =3D 0x20
Tuple #8, code =3D 0x1b (Configuration entry), length =3D 7
000: 02 08 ca 60 20 03 1f
Config index =3D 0x2
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start =3D 0x320 block length =3D 0x20
Tuple #9, code =3D 0x1b (Configuration entry), length =3D 7
000: 03 08 ca 60 40 03 1f
Config index =3D 0x3
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start =3D 0x340 block length =3D 0x20
Tuple #10, code =3D 0x1b (Configuration entry), length =3D 7
000: 04 08 ca 60 80 03 1f
Config index =3D 0x4
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start =3D 0x380 block length =3D 0x20
Tuple #11, code =3D 0x1b (Configuration entry), length =3D 7
000: 05 08 ca 60 00 02 1f
Config index =3D 0x5
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start =3D 0x200 block length =3D 0x20
Tuple #12, code =3D 0x21 (Functional ID), length =3D 2
000: 06 00
Network/LAN adapter
Tuple #13, code =3D 0x14 (No link), length =3D 0
Tuple #14, code =3D 0x0 (Null tuple), length =3D 9
000: 57 42 4c 41 4e 39 32 36 ff
Tuple #15, code =3D 0xff (Terminator), length =3D 0
1 slots found
---------------------
Excerpt from /var/log/messages after starting pccardd
---------------------
Apr 16 18:13:33 pollux pccardd[271]: driver allocation failed for Ethernet
Apr 16 18:13:33 pollux pccardd[271]: pccardd started
---------------------
Regards
Christoph Weber-Fahr
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199904161617.SAA02434>