Date: Mon, 9 Aug 2004 20:15:33 -0500 From: David Kelly <dkelly@HiWAAY.net> To: FreeBSD - questions <questions@freebsd.org> Subject: Re: D-Link DWL-520 won't initialize Message-ID: <C726F0DD-EA6A-11D8-9F7E-000393BB56F2@HiWAAY.net> In-Reply-To: <1D491382-EA55-11D8-9F7E-000393BB56F2@HiWAAY.net> References: <1D491382-EA55-11D8-9F7E-000393BB56F2@HiWAAY.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Aug 9, 2004, at 5:40 PM, David Kelly wrote: > wi0: <Intersil Prism2.5> mem 0xfc000000-0xfc000fff irq 21 at device > 0.0 on pci2 > wi0: timeout in wi_cmd 0x0000; event status 0x0000 > wi0: wi_cmd: busy bit won't clear. > : init failed > device_probe_and_attach: wi0 attach returned 6 Update: exact same card on an Asus P2B PII-400 MHz machine with FreeBSD 4.8-p-something produced much the same results above when I did "kldload if_wi". Difference was "attach returned 5" and the system locked hard. Studying D-Link's site I now know I have a "version E" card, if that means anything. NT4 is the newest Microsoft product I have, and isn't supported by D-Link. The D-Link instructions say their software is to be installed before the hardware so I'm wondering if it has to be FLASH'ed or something? -- David Kelly N4HHE, dkelly@HiWAAY.net ======================================================================== Whom computers would destroy, they must first drive mad.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C726F0DD-EA6A-11D8-9F7E-000393BB56F2>